Clevis Hitch and Pin to Tow an Agricultural Trailer
Questions about a pin hitch, not a hitch pin,inch like the kind you find on agriculture trailers and such. Search after google search just makes me want to scream because it always re-directs to a hitch pin. What is the proper way and equipment...
Adding a 5th Wheel Trailer Hitch to a Flatbed on a 1990 Ford F-350
First time hitch buyer, this one looks great, and I like its features, will this fit my 1990 F350 flatbed truck? The truck already has a built in gooseneck hitch Thanks, p.s. will i need rails or can i just bolt to bed? | I do have a solution...
Brake Controller and Wiring for a 1990 Ford F-250 Towing a 2 Tandem Axle Trailer
Wanting to put a brake controller in my 1990 F250. Can you tell me how to determine which controller I need? I pull a 2 axle trailer twice a year for 65 miles. I am also not sure if I have a plug for the controller or if I need to hard wire...
How Many Hours will the Vision X 9004 Halogen Headlight Bulbs # VX-L9004 Last
I heard you all say in the video that the bulb will only last 250 hours. Is that correct? Ive seen other halogen bulbs that last 10x as long, 2000 hours. | I spoke to my contact at Vision X and he informed me that the Vision X 9004 Halogen...
Replacement Tarp For Extang BlackMax Tonneau Cover On 1984 Ford F-150
I have a 1984 f-150 need a replacement vinyl cover 8 ft bed | If the tonneau cover you have installed on your 1984 F-150 is the Extang # EX2770, then the replacement tarp that is designed for your truck is part # EX1770. For this cover to...
Fifth Wheel Rail Kit, Slider Hitch and Gooseneck Adapter for 1991 Ford F-350 Short Bed
Curt A20 with R20 slider C16641 does it work with 16085 or 16055 goes neck adapters? Does it also fit a 1991 Ford f 350 with overload springs? | The two adapters you mentioned fit fifth wheel rail kits and give you a gooseneck hitch ball. There...
Recommended Trailer Hitch Receiver For 1990 Ford F-250 with Spare Tire
Will the Curt hitch C15300 work on my 1990 F250 without geitting in the way of the access to the spare tire? I see that the 14001 hitch states that spare tire may need to be moved for installation, while the C15300 says that some vehicles may...
Recommended Under-Bed Rail Installation On A 1991 Ford F-350 With Overload Springs
I was wondering if there was an under-bed rail and installation kit for a reese elite 5th wheel hitch that fits on my 1991 ford f350 long bed? | There is not an underbed system from Reese that will function like the Reese Elite puck style system...
Parts Needed to Install Brake Controller in 1989 Ford F-350
this truck does not have any trailer brake controller or 7 way wiring- had some sort of hydraulic brake attachments- with hoses to the bed I need kit s to install 7 way in bed for goose neck trailer, and trailer brake controller. I...
Class III Hitch Receiver Recommendation for 1987 Ford F-150 with 37-1/4 Inch Frame
Hi, I see that the Curt #14001 will fit a 1987 F150 with ~37-1/4inch frame width. However it is a Class IV which is a bit overkill for an old F150. Is there a Class III Curt receiver or other USA made brand that will fit this truck and frame...
How Do Trailer Batteries Normally Get Charged When Being Towed
RE: Trailer Breakaway Kit Battery Charger - Code: 20011 I need a simple way to keep my old RV, 12v deep cycle SLA battery charged while protecting it from over/under charging while on the road. Will this charger handle this application? Thanks......
How Does Draw-Tite 2-1/2 Inch Trailer Hitch Install on a 1988 Ford F-250
I do not have the holes on the bottom side of the fam. | Drilling is required to install Draw-Tite trailer hitch # DT45502 on a 1988 Ford F-250. You will need to drill eight 1/2 inch holes to secure the hitch to the bottom of the vehicle frame....
Can a Trailer Hitch Be Installed on a Modified 1988 Ford F-150, 250, or 350
My concern is where the receiver will be located in relation to the modified bumper on my truck. What is the dimension from the mounting tabs to the center of the receiver? See attached photo. | On trailer hitch # 75038 it measures approximately...
5th Wheel Hitch, Base Rails and Install Kit for 1989 Ford F-150
Im getting a 5th wheel hitch with curt 16104 rails, what installation kit would I need for an 89 ford f150 8ft bed. Thanks | We have the Curt Universal Fifth Wheel Base Rails with Installation Kit # C16200 as there are no custom brackets available...
4-Way Trailer Wiring Replacement Recommendation for 1986 Ford F-150
I have a 1986 f150 and the connector for the tail lights broke from corrosion. I am wondering if this is the part I need in order to reconnect my trucks tail lights to the harness connector that runs from the cab to the bed. | For a 4-way trailer...
Correct Grease Seal for Trailer with L44649 Outer and L68149 Inner Bearing
Hi, Im trying to find the correct grease seal for my boat trailer. The outer bearing is L44649 and the inner bearing is L68149. The grease seal doesnt have any markings that I can find. The outside dimension is 2.327 and inside is 1.662....
Front Hitch for 1986 Ford F-350
Will this hitch fit the front of my 86 F350 2 wheel drive, crew cab dually ? | The B&W Heavy-Duty Trailer Hitch # BWHDRH25122 that you referenced is confirmed to fit your 1986 Ford F-350 Dually, but it's designed to install onto the frame...
What is WD TW - I understand the TW stands for tongue weight, but what is the WD? I am looking at the Curt Class V hitch and this is one of its designations. | Correct! TW stands for tongue weight and WD stands for Weight Distribution. I have...
Are Buyers Products Parts Made in the USA
Is this one made in the USA? If not do you sell a comparable one made in the US? Can you give me a list of any other pintle hitches you sell with the same bolt pattern as this one? Thanks | I'm happy to inform you that all Buyers Products engineering,...
Fifth Wheel Frame Brackets for 1985 Ford F-250 that Require No Drilling Into the Frame
Hello, I am looking for fifth wheel frame brackets that would fit a 1985 F-250 without having to drill holes into the frame of the truck. If you could help me find those that would be greatly appreciated. Thank you, | Although we do not have...
Tool Box Recommendation for a 1988 Ford F-250
How do you compare this product with the Deflectashield Challenger crossover box for value? Will this fit my 1988 F-250? Thank you | I did a little research on Deflecta-Shield Aluminum Products tool boxes and found that share many of the same...
Recommended Tire Chains for a 1988 Ford F-150 with 235/75R15 Size Tires
I have a 1988 f150 300i6 with 235/75r15 tires and I live in nebraska. I would like to know what are the best chained snow chains do you provide that wont break the bank. They cant be made out of cheap chain either. Something that is reliable...
Adjustable Ball Mount Recommendation for 2018 Ram 3500 with 2-1/2 inch Hitch
18 Ram 3500 Factory 20 wheels, What would be an adequate drop on an adjustable ball mount ? | For your 2018 Ram 3500 with a 2-1/2 inch hitch the B and W adjustable ball mount that would be the best option would be the part # BWTS20040B which...
Selecting a Bolt-On/Non-Weld Trailer Hitch Receiver For a 1990 Ford F-Series Super Duty Truck.
Can I order a hitch without the drilled holes in frame or a detailed description of where I need holes drilled. Trying to get a non weld on hitch for a 90 f-superduty | First we will need to determine which style F-Series Super Duty your 1990...
Filter Your Search
Contact and Help