!Cherokee Alpha Wolf Travel Trailer  x   >   !Land Rover  x   >   !S2000  x   >   Cruiser  x   >  

What are the exact outside dimensions of this frame? I have a 2004 Lazy Daze rv and the area that the plate fits in is only 12.5inch x 7 | At its longest and widest point, the Cruiser Accessories License Plate Frame, part # CR19003 measures13-1/2...

Is this license plate frame metal or plastic? Thanks! | The Neo Classic license plate frame # CR15350 is made of durable, die-cast zinc with black powder coated finish so it is metal. It is legal for all 50 states since it does not cover up...

Help! I am in need of how to install the Peak Backup Camera Part #PKCOBU7 Insideh my horse trailer. I have been searching the web for ANY information on how to do this and I have found nothing except to install it to the 12v battery but...

Hello, Im looking at the black license plate fastener caps CR82650 as a couple of mine have gone missing. I do not like the gloss black covers, so Im wondering if these caps are matte black like my current caps. Please let me know what you...

What is the dimensions of the bullet-head screw CR80733? Need - 6 mm x 1.00 x 20 mm. thanks | I went to the ware house and pulled the Cruiser Locking Fasteners for License Plates, part # CR80733. I took some measurements for you that you requested....

Will this part fit a 2007 BMW 328xi rear? | Yes, the Cruiser Accessories License Plate Mounting Plate # CR79150 can be made to fit nearly every vehicle so it would work well on your 2007 BMW 328xi. |

can the carrier be legally used when it covers the rear license plate as shown in several of the in use pictures? especially apparent when the license plate is located in the rear bumper. | A cargo carrier like the Viking Solutions Tilt-N-Go...

Hi, I just bought a trailer that came with a standard size license plate holder. However the plates for Wyoming trailers are smaller - 7 1/4 x 4 1/8, with holes 5 3/4 apart see photo - so I need an adapter that can screw into the standard license...

How wide are the holes in this part spaced? The holes on the license plate are 7inch apart, but the dimples on the Vibe bumper are 10 3/4, not bending around the point of the bumper. So the bracket needs to have screw space in both places. |...

do these fit all plates? do they come in black? The chrome are black the same | The part # CR20643 does fit all standard US license plates. We have the black frame part # CR15350 as well. |

I need to mount a plate on a 20 ft open snowmobile trailer. I keep tearing the license off and even loosing it as snow and ice continually hits it on the highway. I am just wanting your input on using this on an under frame license mount...

would these work for a 2018 Subaru cross trek or a 2012 Ford Feista? | Technically, the Star Pin Locking Fasteners for License Plates and Frames Standard # CR81200 are made for domestic vehicles like the Ford Fiesta, while Star Pin Locking Fasteners...

Hi, are there two in each package or just one? To have a holder for the front at the back of the truck will I need to purchase two or just one package? | The Ram License Plate Frame # CR11135 that you referenced is sold individually. Since...

Do you have anything for 2012 Lincoln MKZ front licence plate frame? | We do offer themed license plate frames in many categories. The linked page will show you all. We even have some hitch covers themed for Lincoln vehicles, such as part #...

The license plate mounting screws, when installed on this bracket, would pierce through the bumper. In other words, wish this bracket was significantly thicker or I could find screws that were half the length of normal license plate screws....

My license plates caps will not come off. I tried prying them off with a screw driver, I tried grasping them with a pliers and pulling them off, they are stuck on. I tried WD40. What do you recommend? | I definitely have a few tips for you...

Is the clear shield crystal clear or does it have a very light tint? I’m looking to soften the light color of my license plate on my deep blue car but do not want to make my license plate difficult to read or draw the attention of law enforcement...

Quote for license plate frames. 100 pieces. Written or with an inscription JESUS top and CHRIST on the bottom. Thanks | I have some license plate frames that you may be interested in, but we do not have anything like what you described. I...

Can you please tell me the size width of these fastener caps in centimeters ? | The Fastener Cap part # CR82431 is designed to fit a bolt head that measures 11.72 millimeters/0.46 inches in diameter. |

How big is the frame? Height and width? | I went out into our warehouse and measured a Stainless License Plate Frame # CR21110 that we had in stock and found that it measured 12-3/8 inches by 6-1/2 inches. |

I bought a 2018 Chevy camaro and dont know the size of these unsightly bolts but they are what I hear the rust proof ones they standardly use. Will these fit over them? | The Cruiser Fastener Caps # CR82650 that you referenced are a universal...

my husband has a 2015 Colorado pick up. Will the license plate frame CR19509 fit without any trouble on this pick up? | Yes, the Golf Club License Plate Frame # CR19509 that you referenced will fit the standard license plate area that is...

What are the screw dimensions of the CR81200, are they #14x3/4"? | Correct, the Star Pin Locking Fasteners for License Plates and Frames part # CR81200 comes with four #14 x 3/4" screws. |

What is the distance in inches between the mounting holes on this product? I have a 2018 Ram 1500 Crew Cab. | Mounting hole spacing for the Ultimate Tuf Combo License Plate Frame # CR62510 is 7 x 4-5/8-inches on hole centers as shown in the...