Measurements of Cruiser License Plate Bracket # CR79050 for 2004 Pontiac Vibe Front License Plate

Updated 09/13/2013 | Published 09/12/2013

Question:

How wide are the holes in this part spaced? The holes on the license plate are 7inch apart, but the dimples on the Vibe bumper are 10 3/4, not bending around the point of the bumper. So the bracket needs to have screw space in both places.

asked by: Polly R

Expert Reply:

I have the measurements noted in the picture of the Cruiser License Plate Bracket # CR79050. The distance between the two screw holes is 7 inches. The smaller oval holes have a width of 3/4 inch and the distance from the outer edge of the oval hole to the outer edge of the other oval hole is 10 inches.

The 7 inches definitely matches up on your license plate and this bracket, however, you will need to measure your vehicle to see if you could make 10 inches work.

expert reply by: Lori W