Capacity of Shocker Hitch XRC Ball Mount With 2-5/16" Hitch Ball SHK94RR
Sticker on hitch in picture says 12000 lbs, but description says 20k? | Good catch; I checked directly with the manufacturer and verified the weight capacity is 20,000 lbs for the Shocker Hitch XRC Cushioned Ball Mount - 2-5/16" Ball - 7-1/2"...
How Does Shocker Hitch Air Cushioned Trailer Coupler - Adjustable Channel Install on Travel Trailer
How does it hook to a travel trailer do you have any pictures Thank you very much | The Shocker Hitch Air Cushioned Trailer Coupler part # SHK73RR will require an adjustable channel on the trailer in order to mount. An example of this is the...
Will the B&W Continuum Weight Distribution System Work with Shocker Air Equalizer
I currently use the Shocker air equalizer with my Husky weight distribution setup. Will the B and W still allow me to use the Shocker as well? | I don't think the Shocker Air Equalizer for Weight Distribution Hitch part # SHK68VR would be compatible...
Is There a Shocker Hitch Shank For a Weight Distribution Hitch
Is there a weight distribution model? SHK95VR | Hey Ron, There is indeed a Shocker Hitch head that will work with a weight distribution hitch, with the right one depending on your hitch size. - 2" Hitch: Shocker Air Equalizer for Weight Distribution...
Adjustable Ball Mount Recommendation for 2.5 inch Hitch that Doesnt Carry Lower Ball Below Platform
Is it possible to remove one of the balls from this mount? If not, do you sell a mount with just a 2inch ball? I need to haul a trailer with the mount all the way down in the bottom hole, and the 2nd ball is so much lower that it drags the ground...
Clevis Pin Recommendation for 12K Shocker Hitch Impact Cushioned Adjustable Clevis
What pin do you recommend using with this? | The Shocker Hitch Impact Cushioned Adjustable Clevis # SHK33RR has a 1-1/4" diameter hole for the clevis pin so I recommend using the Curt Clevis Pin with Handle and Clip # C45803 which has a 1" diameter,...
What Are the Frame Tabs Called That a 5th Wheel Pin Box Mount to?
Hi, I have my small fifth wheel at a local welding shop to get a quote. A previous owner cobbled together a goose neck ranch style hitch to the fifthwheel. In doing so, he butchered the ttrailer framing tabs that stick down into where the pin...
2" Hitch Ball For Use On Shocker Hitch HD Air Ball Mount # SHK22VR For 7-1/2" Drop
Can an additional 2” ball and carrier be purchased separately. The dual ball 2” and 2 5/16” didn’t offer the 7” drop option unless I missed it. I need both sizes readily available. Is this hitch compatible with rock tamer mud flaps? | Yes,...
How to Determine if Shocker 5th Wheel to Gooseneck Pin Box Fits Recessed Flatbed Gooseneck
Will this work inside of a recessed flat bed gooseneck ball box? Like on a Bradford built flatbed. Also, what is the overall height adjustment? | It depends on the dimensions of the recessed gooseneck, but it is possible you can use the Shocker...
Recommended Sway Control When Towing a Travel Trailer Without a Weight Distribution Hitch
We have a 2015 Ram 5500. Will be towing a 38 TT. We dont really require a WD sustem, but want to have an anti sway device. Best recommendation? Electronic looks good but dread installation due to belly covering. Mechanical choices? | I...
Are Shocker Hitch Attachments Compatible With Curt Adjustable 2-Ball Mount
I have the CURT Item # C45902 Adjustable Trailer Hitch Ball Mount, can I use this # SHK88ZR ball attachment or # SHK49ZR ball attachment with that mount? | The Curt Adjustable 2-Ball Mount # C45902 has an inside channel width of 3". The # SHK88ZR...
Adjustable Ball Mount that Can Be Used w/ Curt Friction Sway Control
IS there any way you can hook up a anti-sway bar to the Rapid Hitch with the aluminum ball mounting kit? | If I am understanding what you mean by anti-sway bar then I have a solution for you but there is no way to attach or use the Rapid Hitch...
How to Tell if Shocker Hitch and Rock Tamers Will Fit Together on a 2022 Ford F-350 Super Duty
Does this hitch work with rock tamers on a 2022 f350? How much does it weigh? | Hey Chris, thanks for reaching out! If you have 3" or less spacing from the center of your hitch pin hole to the face of the receiver then this ball mount will...
How to Check if Trailer Axles Are in Correct Position on Gooseneck Trailer
I have a new 30foot gooseneck with a 5foot dove tail, the trailer shakes terrible, I have measured from the back edge of the trailer where the dove tail starts to the center of the rear axle and its 74.5 inches, could my axles be mounted to...
Best Coupler Lock Solution for Shocker Hitch Air Cushioned Trailer Coupler
On part number Item # SHK73RR, what is the appropriate hitch lock that will work to secure my trailer? I have a Curt lock currently, but it wont work with this style hitch. Thank you. | Your Shocker Hitch Air Cushioned Trailer Coupler # SHK73RR...
Recommended Shocker Hitch Air Cushioned Ball Mount
Hi I have a 2023 ford ranger with the curt C13417 trailer hitch. Do you have a shocker hitch that you recommend for this truck and hitch combination? | Yes, we do have a Shocker Hitch that will work great with the Curt Hitch item # C13417 on...
Troubleshooting Jerking Motions With A 2000 Take 3 Car Hauler Trailer
Hello, I’ve just started auto transport and have a 2015 Ram 3500 with OEM gooseneck built in. I have a year 2000 take3 trailer that can haul 3 cars. The trailer seems to jerk a lot when I drive on any uneven road. Feels almost as when you’re...
Will Shocker Cushioned Weight Distribution Shank Work with Equal-i-Zer Weight Distribution
Hello, Will the Shocker Air Equalizer for Weight Distribution Hitch - Set Up Kit - 2inch Hitch - 12K Item # SHK68VR accept the...................... Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200...
What Length Shanks Are Offered for the Shocker Air Equalizer for Weight Distribution Hitch
Do they make 15 inch shank??? | There is only one size shank for the Shocker Air Equalizer for Weight Distribution Hitch, part # SHK68VR or part # SHK88VR. That said, we do have options for ones longer though you will need to forgo any cushioning...
Hitch Pin Distances to Shank for 20K Shocker Ball Mount
What is the horizontal measurement from the furthest pin hole to the part on top that forms the highest peak of the hitch? I have a mounted pintle hitch above my 2 inch receiver, so I want to be sure the highest point of this hitch will clear...
Is There A Clevis Style Ball Mount Available For A 2-1/2 Hitch
Do you have one of these but for a 2.5 inch hitch? AMCC2 | I do have something similar to the Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle # AMCC2 designed for a 2-1/2" hitch, but this is currently only offered in 2". With that said,...
Air Bag Inflation Instructions for 30K Shocker Hitch Air Cushioned Gooseneck Coupler
What are the instructions for filling up the air bag and is a replacement available in the event that it wears out? | The instructions for filling up the Shocker Hitch Air Cushioned Gooseneck Coupler # SHK47MR air bag are to fill up the air...
Replacement Air Bag for 12K Shocker Hitch Air Cushioned Ball Mount
What is the replacement air bag for the SHK29VR shocker hitch? | To replace the air bag that comes with the 12K Shocker Hitch Air Cushioned Ball Mount # SHK29VR you need the following part: - Replacement 5810 Air Bag for Shocker Air Receiver...
Troubleshooting Sway With An Enclosed Car Hauler Trailer
good afternoon, interesting problem. just got a 24 foot enclosed car trailer, went on a trip , had to move car three times to get it to tow at speed on interestate. once i got car set, towed fine. truck was loaded with approximately 1000 lb.....
Filter Your Search
Contact and Help