!Cherokee Alpha Wolf Travel Trailer  x   >   !Impala  x   >   !SM Arnold  x   >   Ultimate Jack  x   >  

How low can I the tongue on my trailer with the Ultimate Trailer Jack - A-Frame Item # 322-RDJ-2K With the caster installed - My current one does not get low enough to get my Chalet A frame in the garage without removing the castor and using...

Can you recommend a bolt-on A-Frame jack with a short retracted bracket height? Looking for max road clearance - use of extended footplate or block is OK if necessary. 14 - cargo trailer 3000# GROSS 2x4 frame rails #BD1550100317? | For a jack...

Hi. I’m trying to find a trailer jack that will have enough clearance to put tailgate of truck down with trailer attached. The ultimate jack looks like a great option bu not sure I have enough clearance behind for the pin. Can you advise if...

I have an A frame jack on a W-W stock trailer that was built back in the 80s. The handle turns with good tolerances no slop, but the handle turns but no action on the jack. will go down under load , not up. the diameter of the tube is 1.625....

I am assuming you can add a wheel or sand shoe to the bottom? 2inch ID? | You can add either a footplate or caster to the Ultimate Trailer Jack # 322-RDJ-2K. This jack has a 2-1/4" outer tube and 2" inner tube and the correct footplate is #...

I had a strange incident towing my small homemade camping trailer. The jack hit a rail on a cattle guard and broke the hitch pin, causing the trailer to come loose and drag on the jack, bending it. Thankfully the chains held and that someone...

I have a 2008 Wells Cargo silver sport 29’ v nose snowmobile trailer rated at 7000 # gross. I need an A-frame jack. What do you recommend, both manual and electric? Thank you | The best option for an electric A-Frame jack is going to be the...

I would like an A frame trailer Jack that is easily removed or low enough to allow the tailgate of my pickup to be lowered | I have a recommendation for you as the Ultimate Trailer Jack # 322-RDJ-2K you found is our best solution for moving...

Hi I’m looking for a new trailer jack for my American hauler The three point bolted on one is bent and doesn’t work now. Which jack would work and is there one that a wheel or like a quick and raise before you have to start cranking it? Thanks...

Hi, Im interested in this trailer jack. This might be a stupid question, but is the 2000 lbs rating for tongue weight or the weight of the trailer and stuff inside it? I have a 16foot cargo trailer with a GVWR of 7550 lbs being pulled by a...

RDJ-2K The Ultimate Trailer Jack - A-Frame - Weld On or Bolt On - Topwind - 27-1/2 Travel - 2,000 lbs Do you have one of these that is a side bolt on, kind of like a swivel type but not a swivel type. Thanks | The side mount bolt on ARK Xtreme...

Hi— I can’t open the tailgate to my pickup truck while my casita trailer is hitched up because the trailer jack is in the way. Do you have jack that swivels out of the way while it’s hitched that will mount to the casita? Do yo carry ‘jack-e-up’...

If mounted on a boat trailer, will it withstand submersion? Launching and loading? | Electric jacks such as the Electric Jack w/ Footplate # EJ-3520-BBX should not be submerged in the water; they are resistant to rain but not being completely...

Hi regarding Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2inch Lift - 2,000 lbs Item # 322-RDJ-2K I have a car carrier with 3500 LB tandem axles. I want to replace the jack with this one but do not know the weight rating on mine. Fully...

I am looking for an electric tongue jack for my 2015 Gulfstream Innsbruck Travel Trailer. I have a 2015 GMC Yukon XL for towing. The jack head needs to be small enough so I can have clearance to lift the back liftgate. Do you have anything for...

How far does the pin go into the jack? I'm worried about it coming out when there's weight on the trailer. | The Ultimate trailer jack, part # 322-RDJ-2K, has a pin used to drop the jack tube. As long as the pin is fully engaged and the safety...

how far does the pin stick out from the jack. I have a winch that is close but not up against the jack and need to know how much clearance I need directly behind the jack post for the pin to operate. | I went out to the warehouse and found that...

Hello, I need a question answered about your ultimate trailer jack 322_RDJ-2K. I need to know the what the height of the top tube is when the jack is dropped to its lowest point. Can the top tube be lowered beyond the first hole on the tube,...

Can the Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2inch Lift - 2,000 lbs Item # 322-RDJ-2K be removed, ie - release the pin and pull the jack out the top? Thanks. | Yes, you can remove the jack tube from the mounting bracket on the Ultimate...

Looking to replace my BD1700100301 which I dislike very much with either a top-wind unit that will raise/lower easily or an electric unit. My 24 enclosed trailer stays loaded at about Max 7000lbs. Any help is appreciated. | For a powered a-frame...

I saw that jack on your website but was looking for something which can hold more than 2000 lbs. since my trailer is rated at 5000 GVWR. | The Ultimate Trailer Jack part # 322-RDJ-2K is the lowest profile trailer jack and would work great for...

What size bolts do you need to mount this jack? | The Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs # 322-RDJ-2K you were looking at requires 3/8" hardware that is at least grade 5, but you will need to pick them up from...

Have this on trailer- frame is good- welded on can I just get the jack itself without the frame? | The inner portion of the Ultimate Trailer Jack # 322-RDJ-2K is not available separately. You'd need to order the whole assembly to get that part...

Are most or all the same size and bolt pattern? | Yes, nearly all trailer a-frame bolt patterns for jacks are the exact same so you don't have to measure or verify anything to know that the Ultimate trailer jack # 322-RDJ-2K will fit your trailer. |