Height Adjustable Side Mount Bolt On Trailer Jack

Question

Question:

RDJ-2K The Ultimate Trailer Jack - A-Frame - Weld On or Bolt On - Topwind - 27-1/2 Travel - 2,000 lbs Do you have one of these that is a side bolt on, kind of like a swivel type but not a swivel type. Thanks

asked by: Thomas G

0

Expert Reply:

The side mount bolt on ARK Xtreme Off-Road Swing-Up Trailer Jack # ORJW750D has a similar height adjustment to the Ultimate Trailer Jack # 322-RDJ-2K. The ARK jack does have a dual wheel and 1,650lb capacity versus the plate and 2,000lb capacity of the Ultimate jack. The ARK does have the ability to swivel as we do not have exact equivalent jack like the Ultimate that bolts on the side frame.

expert reply by: Bud M

0

Answer 1

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Robert, So there isn't one that can be used with a cordless drill (which would be an electric jack only) as all the electric A-frame jacks are all higher than the 12" to 14" you want. There is a manual crank jack you can use which I…

view full answer...

Answer 4

Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…

view full answer...

Answer 5

Sounds like you are looking for a lower profile jack for your trailer so that the tailgate of the vehicle does not interfere with it. I went to our warehouse and was able to locate an a-frame jack that measured less than 12 inches from the bracket…

view full answer...

Answer 6

I do have an option for you but I don't have any way to reduce the ground clearance of your existing a-frame jack . That said, what you can do to fix this issue is replace your existing jack with the Ultimate Trailer Jack part #322-RDJ-2K. The…

view full answer...

Answer 7

Great question, Suzanne! The Ultimate Trailer Jack #UJ44FR is designed to simply adjust all the way up for storage using the spring-loaded lever when you're ready for travel. This gets the wheel completely off the ground and high enough to avoid…

view full answer...

Answer 8

Welcome back Don! The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item #EQ37120ET is exactly what I would recommend using. This is a solid reliable system and the built in sway control will make a noticeable improvement in ride…

view full answer...

Answer 9

Hey Kenneth! The difference in the coupler dimensions you're referring to won't make a difference. You can use the A-Frame Trailer Coupler #CA-5210-B to replace the old Atwood coupler on your trailer. I'm not sure what capacity you need…

view full answer...

Height Adjustable Side Mount Bolt On Trailer Jack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching