Ball Shank Diameter, Rise, Drop, and Length of the Ball Mount that Comes with Trailer Hitch # 12240
what is the rise/ height? | The ball mount that comes with the Curt Trailer Hitch, # 12240, has a rise of 2-5/8 inches and a drop of 3-1/4 inches. Its overall length is 7-1/4 inches. It accepts a ball with a 3/4 inch diameter shank. I have...
Can 2011 Dodge Challenger Tow 800 Lb Sea-Doo Fish Pro
I am looking to buy a sea doo fish pro which weights approx 800lbs will I be able to pull it in my 2011 challenger 6.4L with this hitch? | According to the owner's manual, your Challenger is rated to tow a maximum of 1000 lbs, so if the total...
Does Tongue Weight for Hitch on 2014 Dodge Challenger Include Cargo Carrier
On the toungue weight should I include how much my cargo basket is plus anything I add to the cargo basket such as luggage!? | The weight of the cargo carrier as well as the weight of the cargo is included in the tongue weight for a hitch on...
Is It Normal for Brake Lights Instead of Turn Signals to Flash When Using Hazards With Converter
Hi. I buy the Curt 2 to 3 wires converter to separate turn and brake lights on a Dodge Challenger 2017 and it works good. But when i turn on the warning signals, it blinks the brake lights instead the turn lights. There is a way to solve this...
What is the Difference Between Curt Hitches # 13093 and # 13465
#13093 and #13465 Its for a 2010 dodge challenger | Only the Curt Hitch # 13465 that you referenced would work for your 2010 Dodge Challenger. The other Curt Hitch, part # C13093 that you referenced is designed for 2011 and up Challengers. That...
Troubleshooting Putco 3157 LED Lights on a 2012 Dodge Challenger
I have a 2012 challenger with sequential turn signals 8 bulbs in rear. I installed Putco 3157 LED's. Had the hyper flash and sequential s did not function properly. Installed 2 Putco ceramic resistors on each of the two outside bulbs, left and...
Can Rear View Safety WiFi Backup Camera Be Paired to Vehicle Monitor Using Android Auto
I have a 2013 Dodge Challenger with the standard factory installed stereo no touchscreen display and obviously no backup camera. Im looking to upgrade with both but Ive noticed that there are backup cameras that use Wifi technology and therefore...
Does the Curt Hitch # 13465 fit a 2010 Dodge Challenger
Does this fit a 2010 Challenger SRT8? in combination of a swagman bike carrier for mountain bikes? Thanks, please reply | Yes, the Curt Trailer Hitch # 13465 would work well with a Swagman bike rack to carry your mountain bikes and is a fit...
Frame Angle the Demco A-Frame Trailer Coupler # DM14793-81 is Designed to Fit
What is the mounting angle? A standard is 50 degrees but my aluminum trailer is closer to 40 degrees. | Nearly all A-frame trailer have a 50 degree angle frame, the Demco A-Frame Trailer Coupler # DM14793-81 that you referenced has a 50 degree...
Installation of Curt Trailer Hitch Receiver on a 2017 Dodge Challenger SXT Plus
Do I have to cut the facia | We haven't had the chance to install the Curt Trailer Hitch Receiver # C13236 on the SXT Plus model of the 2017 Dodge Challenger as of yet but it does not require any trimming of the fascia on other models. I've...
Will Adding Shorty Headers and Exhaust w/o Catalytic Converters Increase Power of 2013 Challenger
im putting shorty headers and cat back system on my 2013 challenger with 5.7 my question is should i leave stock converter on and my cat back comes with resonators. how much extra hp and torque could i get out of doing away with stock converter?...
Will the MagnaFlow Catalytic Converter Set for a 2010 Dodge Challenger SRT8 Cause Engine Light
Will these catalytic converters cause a check engine light on my 2010 SRT8 Challenger 6.1? | The MagnaFlow Stainless Steel Catalytic Converter Set part # MF16420 which is a fit for a 2010 Dodge Challenger SRT8 will not cause any check engine...
Draw-Tite Class III Max Frame Receiver Hitch & 2018 Dodge Challenger
I have a 2018 challenger 392. I was looking to get the Draw-tote trailer hitch but I would like to know what else I may need to be fully ready to tow a trailer. This is a side note but I’m looking to get a bushwhacker plus 15fk. Dry: 1900 lbs...
Replacement For 24 Inch 3,500 lb Leaf Springs & Equalizer Upgrade
I have a 2001 timberland timberlodge. It has a GVWR of 7400lb. I want to replace the leaf springs. It has 3 leafs per set. Can you recommend a complete kit for it? The springs are 24" on center. This is a tandem axle. They are rated at 3500lb....
Most Concealed Trailer Hitch Receiver for 2016 Dodge Challenger SXT
I am searching for the most concealed trailer hitch available for a 2016 Dodge Challenger SXT V6. I would like the design to be such as that the hitch receiver is welded to the underside of the hitch crosstube that can be mounted up and behind...
Power and Muffler Style MagnaFlow Cat Back Exhaust for a 2013 Dodge Challenger with 5.7 Liter Hemi
will my stock catalitic converters rob any of the extra power with this system. and are the resonators on this system piped straight through. what kind of real gains in hp and torque can i expect with this system on my 5.7 | A MagnaFlow cat-back...
Trailer Hitch Receiver for 2018 Dodge Challenger
Will this trailer hitch fit on a 2018 widebody Dodge Challenger Hellcat? | The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13236 is a confirmed fit for the 2018 Dodge Challenger, but unfortunately there is not a hitch fit from...
Recommended Ball Mount For 2014 Dodge Challenger To Tow Trailer With 16" Coupler Height
I have a 2014 Dodge Challenger SXT with a Draw-Tite max-frame trailer hitch receiver Item # 76145. Im looking at buying Detail K2 mighty multi A-frame utility trailer Item # K2MMT5X7. But I need help picking which trailer hitch ball mount will...
Recommendations for Carrying 3 Bikes with a 2010 Dodge Challenger
I have a 2010 Dodge Challenger I need a 3 bike rack. I cant find my model on your list. Do you have one with locks for my vehicle?? Thank You, | I do have a solution that would allow you to carry 3 bikes with your 2010 Dodge Challenger, but...
Ball Mount Kit, Trailer Hitch, and Wiring Harness for a 2010 Dodge Challenger
regarding ITEM # 76145 trailer hitch for Dodge Challenger Can you please recommend the proper mount and ball for this vehicle please? | For the Draw-Tite Max-Frame Trailer Hitch item # 76145 you are going to want the Curt Towing Starter Kit...
Part Needed to Separate Brake Lights and Turn Signal in 2010 Dodge Challenger
Hello, I have a 2010 dodge challenger. I want to separate Brake and turn lights. You have any diagram With wire colors, and witch Parts i need it? Thank you | The Vehicle to Vehicle Tail Light Converter # C56196 will allow you to separate your...
Possible Solution for Tire Chains to Fit a 2016 Dodge Challenger with 245/45R20 Tires
We just purchased a 2016 Challenger with 245/45R20 99V m s tires. We signed a disclosure that says the vehicle cannot be operated with tire chains but needs another traction device. Would that apply to the Thule self tensioning low profile...
Which Hitch and Bike Rack Should I Get To Carry E-Bikes On My 2014 Dodge Challenger?
I have a 2014 Dodge Challenger with a aftermarket Borla exhaust. Im looking into getting a E-bike that weighs approximately 50lbs and need a hitch and rack that would accommodate the weight of 1 E-bike and 1 regular bike. Im worried about ground...
Trailer Hitch Tow Capacity Different than Vehicle Tow Capacity, 2011 Dodge Challenger with 3.6 Liter
Hi i just wanted to ask for the base challenger 3.6 engine the site states the max towing weight 1000lb did you guys find this to be the case with either charger or challenger,did you tow anything bigger basically can i tow 3500 lb with challenger...
Filter Your Search
Contact and Help