Result:

I just went and got another pop up trailer b/c I needed two. Just got home and cannot get it off the ball. I tried cranking it and releasing the latch at the same time but as I crank, it is lifting the back end of the car along with the coupler....

I am looking for a weight distributing\anti-sway hitch. Tow vehicle - 2019 Ford Ranger 4x4, 7500 tow capacity, max tongue wt 750. Trailer 1 - Aluminum equipment hauler 18, loaded weight 4552 - Trailer and cargo total. Trailer 2 - Starcraft...

What do I need to get 7 Way for my 2010 Ford Ranger Sport. I dont even know if its already exiting 7 way? Am looking at kit Reese # 74682. Thanks | The Reese Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682 is meant to be a replacement for...

Hello, I have 2024 Ford Ranger Raptor and was wondering if this would fit since i have the raptor? Part RAS29VR. Was also wondering if they have air bags instead. I have a trailer that’s 4,500 pounds that i haul and I’m looking to get more stability...

Vehicle: 2003 Ford Ranger Edge 4 x 4 v6 with 5500 lb max tow rating Trailer: Evolution 15 GVW of trailer: 4,420 lbs Tongue weight: 500 lbs In determining the correct WDH I see you need to add the tongue weight of trailer with all stuff that...

I have a 21 Ford Ranger Lariat with factory tow package. I will be towing a 21 Lance 1475 S travel trailer with dry weight of 3217, GVWR of 4500 I think and tongue weight of 340. It also has factory lift. Im looking for a weight dist. hitch...

Will this fit my Ranger? I like the two types of plug in ports. | If your 2003 Ford Ranger came with a factory installed 7-Way trailer connector then you could install 7- and 4-Way connector # 74682. If it did not come with a trailer connector...

I have a Rockwood Freedom popup camper for which Id like to install a sway control. Am considering your Reese Friction Sway Control Kit #83660 but I have a question. About 10inch back along the side of the trailers hitch is the support mount...

Hello, I have a 2020 Ford Ranger Super Crew with the towing package which has a 7500 towing capacity and a 750 tongue capacity. I will be towing a 2021 Dutchman Coleman Lantern LT 17B camper. 2986 Dry weight and a payload capacity of 864...

I have a 2022 ford Ranger that will be towing a Winnebago microminnie 2100Bh. Trailer max weight is 5000lbs. What kind of WDH with sway control should I look at? I was looking at the curt Reese Pro Round Bar Weight Distribution w Sway Control...

I have a 2020 ford ranger with factory tow package,pulling a 3100 lb trailer. Will this be a good setup for me? | More than likely the Reese Pro Round Bar Weight Distribution # RE34FR will work for your trailer. You want to choose a weight distribution...

Is this weight distributing for the Ranger? I would prefer a weight distributing hitch the best I can put on. What do you recommend? Also there is a capped plug that seems to be from the factory. Is there something I need to plug into that...

I was wondering if this could be used to replace the grill emblem on a 2003 Ford Ranger XLT with the honeycomb grill. Wiring is not my concern, but the actual size of the emblem is. Thanks for your time and help! | Based on my research it looks...

I need to know if this product is compatible for me 2001 Ford Ranger truck ? | The 4-pole wiring harness kit you referenced, Curt # C55510, is not a fit for your 2001 Ford Ranger but we do have similar wiring kits that will work fine for you. You...

ford ranger with class3 hitch 350lbs 3500lbs if I move up to a class3 500lbs 5000lbs will this allow me more hitch weight or should I go with a WD system would like to pull 375lbs 4500lbs ranger tow weight is 5800lbs | A towing setup is only...

I need a plug in trailer wiring for my truck its a 4 way. I would like a plug in plug type not the four way prong but a plug that mounts to my truck with a flip up cap. Its a 2009 ford ranger. I have wires coming down but their deteriorating....

Hello, A few months ago the wiring on my 2007 ford ranger 4x4 corroded and I had to cut it off. It looked to be factory because it went into the wire harness on the driver side frame rail. I have since been trying to find replacement wiring...

Trying to find the proper weight distribution hitch not really understanding web site I have a 2019 ford ranger will be pulling a 2017 z-1 lite i think m18ss any its like 3800 dry 44 or 45 loaded i think it said tongue was 414 or something...

Is it over kill to get that type of hitch to pull a camper weighing 4400 lbs? | Since your camper weighs 4400lbs and your 2019 Ford Ranger Lariat Off Road with the Tow Package weighs in at at 3900-4400lbs a weight distribution hitch is definitely...

2011 Ford Ranger XLT 2WD, 4.0 V6, w/ ARE fiberglass cap, 55K miles. I already installed the RAS system last week. However, in my long wait for that suspension upgrade I also ordered the Timbren part # TFRR050A. So my question is this. Is using...

I live in a very rainy/wet environment which trailer hitch is confirmed to fit my 2023 Ford Ranger that won't rust as fast due to the elements. I need to cargo carrier to haul extra wood around on my property. | Out of the two hitches that are...

I have a 2010 Ford Ranger Sport 4L supercab. Will this plug directly into teh existing truck harness. Also if i wanted an electric brake is the factory harness equiped to plug in a electric trailer brake. | If your 2010 Ford Ranger originally...

I need advise on setting up my 2002 Ford Ranger 2WD, 3liter engine, for a better suspension for Towing a Trailer. What do you recommend for Air Bags and other changes that are adjustable for a better Towing suspension upgrade. Thanks. | The...

I tried to wire my trailers using the existing 4 wire on the Ranger and seems that the electrical load is to great, One the truck brake is applied, the running lights on the trailer dim and some of my running lights on the truck come on. The...