7-Way Trailer Connector for 2009 Ford Ranger

Published 05/12/2022

Products Featured in This Question

Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End

(768)

$14.85

Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional

(1200)

$141.95

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3551)

$118.67

Question:

I need a plug in trailer wiring for my truck its a 4 way. I would like a plug in plug type not the four way prong but a plug that mounts to my truck with a flip up cap. Its a 2009 ford ranger. I have wires coming down but their deteriorating. Need whole package replaced

asked by: Christopher G

Expert Reply:

If your Ranger was originally equipped with the factory 7-way, we have a plug and play option available as part # 74682 which would plug into the connector behind the rear bumper.

If it wasn't equipped with the factory 7-way, you'll first need a functional 4-pole connector. If yours is damaged, you can replace it using # HM40655 which is a plug and play install. To convert that to a 7-way, you'd simply use a 4 pole to 7-way adapter like part # 37185. If the trailer you'll be towing doesn't have electric brakes, you'll just ground the white wire on the adapter to the truck frame and plug the adapter into the functioning 4-pole. The remaining wires can be bundled up out of the way.

If the trailer does have electric brakes, you'll need a brake controller to actuate them. I'd recommend the Curt Triflex, part # C24VV as a relatively inexpensive, well preforming option. You'll also need our # ETBC7 brake controller install kit that includes the adapter I mentioned above, as well as all the wire, circuit breakers and hardware to complete the install.

I've linked to a video showing how the # ETBC7 kit is used.

expert reply by: Mike L