Result: mounting bracket

Hey David! The Curt Cargo Bag #C18211 can be used with the 22x60 Flint Hill Goods Cargo Carrier #FHG49ZR. However, the bag itself is 22" wide, while the cargo carrier has an inside width of 20-1/2". You will be able to sit it down inside…

With Curt Trailer Hitch Receiver #C15302 installed on a 2003 Chevy Silverado 2500 short bed the hitch will be in the same position as a factory hitch or at least within a fraction of an inch. By that I mean the receiver will be right under the rear…

In regards to the Curt Trailer Hitch Receiver part #C15302 which is a fit for a 2001 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed, there are only two factory weld nuts in the frame which get reused, they are the two closest to the bumper. The other…

Hey Mark, so the Curt hitch part #C15302 basically is strong enough without attaching to the bumper so it wasn't designed into it. Curt is very thorough with their hitch designs so I would not worry about this hitch not having the needed…

Hey Phillip. The mounting bracket item #18144 is exactly what you need for the Blue Ox Trailer Hitch item #BLU33UR. This 2" hitch is custom fit for the 2020 Jeep Wrangler Unlimited. The mounting bracket will bolt directly to it. For a wiring…

Hey Keith. For a plug and play wiring harness that fits your 2023 Jeep Wrangler JL, you'll want the Curt T-Connector Vehicle Wiring Harness item #56407. This custom-fit T-connector plugs into your Jeep's wiring harness, which is located…

Yes, the Curt T-Connector #56407 will require you to route a power wire from the black module box to the battery on your 2024 Jeep Wrangler. I know it isn't convenient, but it's the best setup when it comes to a trailer wiring harness since…

The Air Lift 1000 Air Helper Springs for Coil Springs item #AL29PD are a universal fit. I spoke with my rep at Airlift. If the rear coil springs on your 2011 VW Jetta Sport Wagon measure just over 3-1/2" in diameter and 7" in length when…

What you will want to do is measure the distance between the mounting holes on the frame of your truck to see if the Curt hitch part #C15300 will fit. If the holes are 36 inches apart on center then this hitch will fit and work well.

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

The Curt Class V part #C15319 and the #C15318 both do fit your 1997 Dodge Ram 3500 single cab but the difference is the bed length that either hitch is designed to fit. The part #C15319 is for the long bed trucks and the #C15318 is for the short bed…

I checked with Curt and the distance between the vertical mounting flanges of the Curt #C15300 is 33.312 inches.