Result: Step Support

We typically recommend the part # PF775-BKT-2 as a way to support the steps of a plastic fender like your # F008575. | the mounting brackets I got the part number CE26098G-2 for these fenders F008575 are useless,...

The Fulton Plastic Fender with Top and Side Steps, # F008582, have molded in steps on each end and the top of the fender and are designed to be stepped on as long as the mounting hardware used is capable of supporting the weight that will be required. |

I have two questions: 1. Will the brackets support the two side steps of the fender as well as the top step? | I am looking at installing Fulton Fenders item # F008573 and mounting them with...

There is an angled to the wheel, welded to frame, piece of metal, which I think was a step support bracket, in front and behind each wheel. | Hello. I need 2 fenders for a 13 inch wheel for my boat trailer,...

Does it require brackets to support the weight of stepping on it? Or...can you simply bolt the rear flange flush against the frame with spacers as required ? | Looking at the F008553 fender. 13 tire. Does it...

I would like to install plastic fenders that I can step on for the subject trailer. The wheels are 12inch and its difficult to get onto my jetski without stepping on a fender. | I would like to install plastic...

these fenders: Single Axle Trailer Fender w Top Step - Style C - White Plastic - 8 to 12 Wheels - Qty 1 Will attaching the flat back side of the fenders support the fender? | these fenders: Single Axle Trailer...

looking at item # F008584-2, i have 29.5 between supports where you step this product shows 30.25. in the diagram. is there enough space between or play for them to work on my trailer? | looking at item #...

When the fender is resting on the mounting bracket the bracket supporting the side step like it should be the top step is literally sitting on the top of the tire. | Our boat trailer has 205/75...

To stand on this fender, you will need to not only weld the edge but also as you stated add brackets which will support the weight. The steel is strong, but I recommend using brackets that can hold the weight on their own to ensure you won't have any deformation on your trailer fender when you step on it. |

They cannot be used as a step. I want to replace them with step fenders. | I have a 2020 NuCamp Boondock Edge TAG tear trailer. The tires are 15 inch ST235/75R15 LRC. The existing fenders attach to the...

The Fulton Fender # F008573 is plastic but it's a thick hard plastic fender. It has to be to support up to 300 pounds on the step. All the fenders we sell are either a similar plastic or metal. | Hi, I have...

Also, do you sell galvanized steel brackets that double as a support pad under the side steps? | Please let me know the distance between the left and right mount bracket holes on fender # F008582. The holes...

You'll want to go this route rather than using L-brackets as L-brackets wouldn't provide enough support to allow the fender to be stepped on. I've linked to our selection of U-bolts. | What L brackets and mounting...

I need a fender that fits that. My supports for the steps are four inches wide and eight inches out from trailer to end. | On the Redline Trailer Fenders - PF11X35W I need to know how far apart the mounting...

The Fulton Single Axle Trailer Fender with Top and Side Steps # F008585 is also available as a 2-pack # F008585-2 for your 1999 Escort WT18GA Boat Trailer. | 1999 Escort wt18ga trailer for Bayliner Capri boat. Looking to replace...

This will be the most effective first step to reduce sway but you can still add other aftermarket kits later on if you still find a need. | will this help my Pleasure-Way 2001 Dodge 350 van RV from wandering when passed by...

I attached a picture that shows that step of the instructions for this kit. The roller has to be removed so that the spring of the RAS can lay across the leaf spring like it needs to. | I know the standard duty RAS3611 is...

how much weight can the fender support and can it be installed in a flat trailer? | how much weight can the fender support and can it be installed in a flat trailer? Also, do you have 14 inch galvanized rims and tires? | The...

I went ahead and attached the steps from the installation manual for attaching the kit with your overland springs. | Hello, I own a 2020 Silverado 3500hd with a 3,700 cargo capacity. My vehicle has two overload leaf springs...

I have stepped down from an F-250 to an F-150 2019 Platinum Crew cab with 5.5foot box and noticed a considerable difference when towing my enclosed trailer. | I have stepped down from an F-250 to an F-150 2019 Platinum Crew...

The Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14" Wheels - Qty 1# F008554 is a great fender to replace what has broken on your current tow dolly. | At 10pm on a road in the middle of nowhere, the fender...

Thank you very much for your support. | Hello, can I fit a 235 75 R15 off road tire on a 15x6 trailer wheel? part# AM20545 if yes, will the 15inch Fulton single axle trailer fender with top and side step will be wide enough...

I am trying to avoid a weight distribution hitch due to the extra steps associated with hooking up the trailer. I would prefer to it on the hitch and go if that option is available via air bags. | I am looking for air bags...