Result: trailer blocks

I have replacement options for you, but there is not a different style of 7-way connector that is more secure than a 7-way blade connector like you have or one that locks together. One option is to go ahead and replace both the factory truck…

Since the Atwood Jack part #80515 has been discontinued the decision would be pretty easy for you. The Bulldog Jack part #BD500200 is not only the obvious choice between the two you referenced, this jack is an excellent jack with plenty of power for…

The only difference between the JT's Strong Arm Jack Stabilizer Kit #LC191023 and #LC191025 is that #LC191023 is deigned for 5th wheel RV's that have 58" or more between the front landing gear legs, while #LC191025 is designed to be used…

Hey Lyn! The Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475 will definitely work on a trailer like yours. The lower section is 45" long and will sit down in the trailer and attach to the floor/crossmembers with U-bolts. With…

Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…

Hi Steve, great question! The bolt spread dimensions on scissor jacks aren’t universal, they can vary a bit depending on the brand and capacity. Most standard RV scissor jacks use a mounting plate that’s roughly 3-1/4" wide with bolt holes…

Hey Lucas, thanks for all of the info you mentioned on your scissor jacks. Based on that the correct SnapJack set would be the part #SN32FR which is a set of 4. Now for the tongue jack the correct fitting Snap Pad for that would be the part #SN97FR.…

A vehicle's towing capacity depends on the entire complement of factory equipment installed on it. The best place to confirm this is the owner's manual. I checked an online edition of the manual for the 2014 Jeep Grand Cherokee Limited with…

Many of the RV faucets we offer are constructed of a plated or coated ABS plastic. This is okay for occasional use, but it sounds like you're wanting to fill deeper, larger pots with water. One inadvertent whack when you're trying to maneuver…

The release for the Turnoverball gooseneck hitches #BWGNRK1116 would require you to most likely put a notch in the wheel well guards you plan to install as well. We have had customer come back and tell us they didn't need to notch the guards.

The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…

Sounds like you are looking for the trailer hub/drum part #8-407-5UC3-EZ which is for 4,400 lb axles, has the 6 bolt pattern wheel bolt pattern and also is the 8-407 you mentioned.