Are The Bolt Pattern Dimensions the Same On All Scissor Jacks?

Updated 12/01/2025 | Published 10/31/2025

Products Featured in This Question

SnapPad SnapJack SJ RV Scissor Jack Pads - Qty 4

(129)

$249.95

Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4

(828)

$144.49

Question:

Just purchased an IN Tech OVR navigate but I dont have it here so I cannot measure anything. Are the bolt spread dimensions the same on all scissor jacks as well as the shoe they replace ? Thanks

asked by: Steve K

Expert Reply:

Hi Steve, great question! The bolt spread dimensions on scissor jacks aren’t universal, they can vary a bit depending on the brand and capacity. Most standard RV scissor jacks use a mounting plate that’s roughly 3-1/4" wide with bolt holes spaced around 3" to 3-1/4" center-to-center, but some models can differ slightly.

The “shoe” or footplate size also varies depending on the jack’s design, so if you’re replacing an existing set, it’s best to check your current bolt spacing when you get the trailer.

Or if you are wanting to get new jacks you can be sure will work with the # SN32FR jack pads, I recommend the following:

- Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4

expert reply by: Jesse M

SnapPad SnapJack SJ RV Scissor Jack Pads
(click to enlarge)

Jesse M.

12/1/2025

Hey Steve, were you able to check the bolt spacing on your IN Tech OVR Navigate once you had it available? Knowing what you found could help others trying to match scissor jacks with the SnapJack pads. Your update could make it easier for the next person with the same setup.