Search: Jack Wheels   >   Kayak Trailer   >   !Fishing Rod Tube Included  x   >  

Yes that's correct. The Removable Wheel for Trailer Valet JXS Trailer Jacks #TV89FR has a 2" diameter which will fit in a 2" diameter tube like the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered…

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

?The distance from the mounting plate to the foot on the Trailer Valet JX-2K #TV54FR is 13" when fully retracted. The distance from the mounting plate to the top of the jack is 23". This jack can provide you with up to…

I can understand why you kept the Demco Auto Slide #DM8550024 on your 2016 Ford F350 because it can be pretty difficult hooking up when it's at an angle. You should be able to get the head moved but it may be difficult. One possible way…

The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option #TV54FR had just switched to using the round mounting plate over the triangular mounting plate. We have updated our pictures to match the new product but there are a couple…

The 3-bolt mounting flange on the Lippert Electric A-Frame Trailer Jack #LC285318 has a standardized hole pattern. This jack is intended to mount so that the included LED light faces forward toward the tow vehicle to illuminate the coupler and…

Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

For a 1 inch lift we have found that in most cases there is no need for any spacer adapters for the Firestone Ride Rite kits like part #F2445. If a spacer was needed for such a small lift Firestone would have one available.

There are two pin boxes we offer that can be used as replacement for your Venture CJ13517 pin box and only one of them is rated for your application on a GVWR of 17000-lbs. Because of this you will need to use the Trailair Air Ride 5th Wheel King…

The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR…

I spoke with my contact at M-3 who said the ramp spring shaft can be cut down to a maximum of 62 inches and you would still have room to wind the springs. The shaft is made of steel tubing so the proper saw or power saw blade would cut through it.…