Chevrolet  x   >   Equinox  x   >   !Rightline Gear  x   >   Performance Tool  x   >  

which wire on the brake switch do I use | Typically, on Chevy vehicles like your 2012 Equinox, the brake switch wire you need will be light blue with a white stripe. However, you will need to test with a circuit tester like # PTW2993 if needed...

Im installing a Roadmaster 154 tail light wiring Kit on my 2019 Chevy Equnox Premier and l need the vehicle wire color code for both tail lights. I dont know which wires to use for the diodes. Can you tell me exactly what wire controls which...

I am looking for a pair of bearing buddys for a Harbor Freight utility trailer part number 62648 | Harbor Freight trailers are notorious for not using standard trailer part sizes, but there are times we find a fit. If you measure your hub on...

trying to install BX1730 on a 2024 Chevy Equinox. Watch video on a 2023 by Ryan. I am up to the point of removing the Facia. Trying to separate the Facia just above tire. Ryan says just pull and it will pop free. The 2024 must have a different...

hi I have a tow-pro elite for a 2015 chevy equinox all good but the red wire for the brake switch , where would I best connect it ? read on some newer car not to connect it to the brake switch , it may miss it up. to go back at...

I’ve looked high and low and can not find directions as to what wire I tie the brake controller to on a 2017 Chevy Equinox. I need help, the hitch when on well. Cleaning the weld bolts was fun, but the hitch look great!!! Ply help me finish...

I need help to wire my new 2023 Chevrolet Equinox Premier left and right tail light wiring for RV Flat Towing. The tail lights have one 6 pin connector, number 1, 2, 3 on the top row and 4, 5, 6 on the bottom row. Only 4 of the 6 pins are connected...

I am wondering if it is safe to use the hitch that I installed on my 2021 Equinox as a jacking point to lift the rear of the vehicle. | You should never use the Draw-Tite Max-Frame Trailer Hitch Receiver # 76419 as a lifting point for your 2021...

Left and right taillight leads are hot all the time on 4 pole it is on a 2011 chev equinox even when the car is off | It sounds like there could be a problem along the 12 volt power wire that connects to the battery. It may be allowing power...

2018 chev equinox premier. Trying to install roadmaster wiring kit with diodes. Cant figure out how to determine which wire is which in tail lights. Tried to use test light but nothing happens | To locate which wires operate which functions...

In regards to the Roadmaster Universal Hy-Power Diode Wiring Kit. I have a 2021 Chevrolet Premier Equinox and I am setting it up for flat towing. The tail lights just have one bulb in each tail light housing and the bulbs are unaccessible,...

what system will work on 2013 equinox | Your 2013 Chevrolet Equinox uses a type 921 backup light bulb. The Hopkins product you reviewed, part # HM20101VA, is a replacement for the type 3156 bulb. My contact at Hopkins advises that they do not...

There is no power to the plug. Do I need to add some fuses or circuit breakers? | If you tested the 4-way of the Curt Connector part # 56094 with a circuit tester like our part # PTW2993 and got no power out of any of the pins with the different...

I have a 2019 chevy equinox. Im instructed to splice the red wire in to the pink/white wire and there is no pink/wire wire available. Certainly dont want to grab the wrong wire. Now Im stuck with my car all torn apart on a Sunday afternoon....

I am interested in towing a pop-up trailer, but my 2022 Chevy Equinox is not wired yet. I do have the factory tow package. | We can help you get the wiring setup for your 2022 Chevy Equinox. The first thing you will need to do is install a 4-way...

I just bought a 4flat taillight converter from you #41235. When the car lights are on the only lights that will work are the side marker lights. What is the solution? | The problem you are having sounds like it could be an overload or a ground...

Im installing my trailer brake controller on a 2007 Equinox but am not getting 12V power from the brake pedal switch. I understand it is just a pedal position sensor. Where do I connect to get the brake signal into the controller? | Your...

Will wiring harness 56375 work on a 2019 Chevy Equinox LT? I had this harness installed but the left turn signal doesn’t work on the trailer. I tried the trailer on two other vehicles so it’s not the trailer. Any ideas? | According to Curt the...

I have a 2018 Chevy Equinox with a 2.0 Turbo engine. It is factory wired with a seven pin trailer plug and factory hitch. The brake controller wires are to be somewhere inside the drivers area. The dealer says they have a good idea where they...

I installed the 56012 and my fuses are in the correct position as well as relays. The left trailer light works in all phases, but right trailer light doesnt respond at all. The light kit is new and was previously checked with my dads truck...

Which wire is the cold on the BLS for 2012 chevy equinox | When installing a brake controller in your 2012 Chevy Equinox you will need to access the stoplight circuit from the BCM (Body Control Module) and not the brake switch. It is located...

i Have a 2008 Equinox, the dealer sent out to have a hitch and wiring done. So brake,signal and emergency lights work properly but no running lights. Did they miss hooking up a wire ? | I would first use a circuit tester, like part # PTW2993,...

Is there two cold wires coming from the brake light switch ie one going directly to the 3rd brake light and one going to the emergency flasher relay for L and R brake lights? | On your 2013 Chevy Equinox there is only one cold stop light switch...

I do not have the factory towing package. Why cant I use harness 118264 and just plug into the factory harness? Thanks | If your 2014 Chevy Equinox did not come with the factory tow package, then the factory connection point is probably not...