XV  x   >   !Outback wagon  x   >   Ranger  x   >   2007  x   >  

I have a 2007 Ford Ranger sport with the step bumper designed for towing from factory. It has the holes for the breakaway chains for towing and a large lip at the front. The ball is right in the middle in a factory hole. I measured from the...

i have a 2007 ford ranger that has a place to put a hitch ball in. i need a 2 inch hitch ball with a shank that will fit in the hole that was pre built by ford | I cannot make a accurate recommendation without more information. The thickness...

When owned a 1997 Ford Ranger purchased a T style wire harness adapter that fit into OEM wire harness for trailer wiring. I am trying to locate same item for my 2007 Ranger ,if available where can purchase. Thank you for your assistance |...

Hello. I have 2007 Ford Ranger Sport Extended Cab. The truck has two small doors that open opposite the front driver and passenger doors. Im interesting in ordering the Westin side steps part #23-155. Im not sure I have ed the correct side...

Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan - Class V Item # D15450 Will this part fit my 2007 ford ranger? V6 4.0. | The Derale Atomic-Cool Remote Engine Oil Cooler Kit w/ Fan - Class V part # D15450 is a remote mounted engine cooler...

HAVE SIGNAL BRAKE FLASHERS BUT NO TAIL LIGHTS HAVE NO POWER AT THE PLUG CANT FIND A BLOWN FUSE HELP | Since you have brake and turn but not taillights, the issue can be a fuse, a relay, bad wiring, or a weak connection. I recommend you first...

Is this weight distributing for the Ranger? I would prefer a weight distributing hitch the best I can put on. What do you recommend? Also there is a capped plug that seems to be from the factory. Is there something I need to plug into that...

For the hitch Item # C12012 is there drilling required for installing on my 07 ranger? Will this hitch Item # C12012 fit with a full size spare tire? | Drilling is required to install Curt Class II trailer hitch # C12012 on your 2007 Ford Ranger....

Hello...I own an 07 Ford Ranger and it has a Truxport Tonneau cover. The Velcro hooked side that is mounted on the bed frames on each side needs replaced. It is about 1inch wide....can you suggest a product that would work....I know the difficult...

I have a 2007 ford ranger and I am gonna install the Curt 55515 trailer connector does the ecu need to be flashed? | Installing the Curt T-Connector Vehicle Wiring Harness item # C55515 will not require you to flash the ecu on your 2007 Ford...

Can you put a ball on the rear of a receiver hitch cargo carrier to pull a light trailer? | We do have an easy solution for you to use a cargo carrier and tow at the same time, though you would not be able to put a hitch ball on a cargo carrier...

Your videos on installing a electronic brake controler on a 2006 ford ranger are great. But I have a 2007 4 cylinder and there are several wires on my brake light switch they have little if any slack to connect the red controller wire plus there...

Is this rack lockable? | Curt's 2 Bike Platform Rack for Fat Bikes # C18085-FB includes an anti-rattle threaded hitch pin that will reduce motion of the rack in your hitch but this feature prevents use of a standard hitch lock. No worries though...

I bought a curt triflex for my new trailer about 3 months ago. The brake controller worked flawlessly up until about a week ago. One day the controller gave me an ol code. I hooked the trailer up to my buddies truck and no code and the brakes...

Hello, A few months ago the wiring on my 2007 ford ranger 4x4 corroded and I had to cut it off. It looked to be factory because it went into the wire harness on the driver side frame rail. I have since been trying to find replacement wiring...

Will this fit a SAE AP2 01 replacement amber side maker lens for a 2007 Rockwood Freedom 1640 LTD tent trailer? | If your original light is 4" L x 2" W x 1-1/8" D then Optronics light # MC32AB will fit in its place. If you have different dimensions...

I need a hitch for a 2019 Honda HR-V which is the best option for carrying a bike rack? | The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7322 is a confirmed fit for your 2019 Honda HR-V and would be our recommendation for...

Will your soft top work on an 2007 Ford Ranger with a 6 foot bed? | As far as a soft top that works with your 6-foot bed on your 2007 Ford Ranger, the only option we carry is designed to fit non-Stepside models. That part is the Bestop Supertop...

I am looking to get Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steelinch for my Ford Ranger 2007. I saw that in the reviews some people had installed it on similar trucks. I would like to hear your opinion...

I have 2007 3.0 ford ranger it’s not a 4x4. I’m towing a Rockwood freedom pop up camper Ltd 1940. Label on camper says. GVWR/2,381 UVW/1,656 does not have generator. CCC/611 lbs. manual calls for class 2. Will your E-S3 work or do I need...

What wires would I connect it to on a 2007 ford ranger fx4 ?does it come with directions for my make and model? | The harness that you will need to access to install the Pop & Lock Custom Tailgate Lock # PAL8200 on your 2007 Ford Ranger will...

I have a 2019 Mitsubishi Outlander Sport does this hitch fit? | Yes, the Curt hitch part # C13079 is a confirmed fit for your 2019 Mitsubishi Outlander Sport and would work well as it's a 2 inch hitch with plenty of towing capacity. If you...

will this part work for my 2007 ford ranger? I want to be able to rent a trailer requiring a 4 way flat end for the trailer side. is there a plug in trailer wiring harness that would not require any splicing? any suggestions, details appreciated. thanks...

I have a 2007 Ford Ranger sport2wd that I want to set up for towing. I have the option of using a Stowmaster 5000, or a Roadmaster Falcon 2 for the tow bar. I wish to confirm the base platesitem # 477-1 are the proper base plates? Also, which...