Trailer Hitch Receiver and Wiring Harness For a 2000 Honda S2000
Hi, Im interested in the S2000 hitch C11198 but it says that it only fits 2004 - 2009 S2000s. Do you guys have one that will fit a MY 2000 S2000? Thanks | The Curt Weld-On 2" Receiver # E17 will allow you to have a receiver custom fabricated...
Replacement Axles for a 2010 Jayco Designer 5th Wheel Trailer
Need a replacement axle for my 2010 jayco designer 5th wheel camper.the axle is 3inch in diameter and about 86inch from hub face to hub face.it is about 68 1/2inch from center of spring pin to center of spring pin holes. It also has 8 lug hubs...
Replacement Motor for Fan-tastic 8100TR
hello, I need to replace my motor fan assembly my model # 8100TR do you this in stock? | I have a solution for you, but the 8100TR model number was in a lot of the older Fan-tastic Create-A-Breeze vents, which have since been discontinued. You...
Trailer Hitch and Wiring for a 2000 Honda S2000
Do you have an installation manual for the hitch its a 2000 honda s2000 | Yes, installation instructions for Curt trailer hitch # C11212 (no longer available) are linked on its product page, right hand side of the page. I have also included...
Identifying Trailer Axle on 2003 Jayco Designer 32 RLTS 5th Wheel
what is axle weight rating for 2003 jayco designer 5th wheel 32rlts | From what I have found, the 2003 Jayco Designer 32 RLTS has a GVWR of 13,500 lbs. The tandem axles will have enough capacity to handle the GVWR but typically subtract the...
Recommended Replacement For An Atwood Landing Gear On A 2005 Fleetwood Prowler
I need the follow leg on landing gear for a 2005 Fleetwood Prowler. The spacing between welds is 21” inside and 23” outside. Thanks | Atwood was bought out by Dometic and Lippert back in 2016 and have since stopped making these products so your...
Ejecting Stuck DVD From Jensen RV Stereo
I have an rv unit. I cannot get the DVD to eject. What can I do? Do not know how to take it out. Its a Jenson radio, cd and DVD player. | For the Jensen RV Stereo, # JWM60A that you linked to, there is a small hole to the right of the eject...
Auto Leveling Trailer Jack Recommendation for 2004 Jayco Designer FW
This fifth wheel came with electric jacks from the factory. We want to add auto leveling to our trailer. Would the ground control 3.0 system be the best choice for auto leveling or is there a better way to go about adding the auto leveling feature?...
Replacement for Atwood 75721 Landing Gear Motor
Existing motor Atwood 75721. You recommend LG 142178 5500 lbs. Can I use the heavy duty 6500 lbs LG 196308? Will, that still fit the same? | The Replacement Motor # LG-142178 that you referenced is what you need to replace the existing Atwood...
Options For RV Slide-Out Tray Assemblies
I’m looking for 45” extension drawer slides with various load capacity to choose from. We plan to mount them in cargo/basement of 2002 Jayco Designer 5th wheel travel trailer. Thank you | We have a couple options close to 45 inches long for...
Can Dexter E-Z Flex Equalizers K71-654-00 Be Used To Replace Equalizers On 2003 Jayco Designer 31RLS
Hello, I have a 2003 Jayco Designer 31rls fifth wheel trailer. I would like to replace the stock cast tandem axle equalizers. The current stock cast equalizers measure more than 6.25 across the lower bolts center to center. I say more than...
Replacement Lens for LED Trailer Clearance or Side Marker Light with Reflex Reflector 328-K-59LB
Do you have red replacement lens for LED light [Code 328-K-59LB ] ? This is your code for the led light. | Yes, we do offer the correct replacement lens for the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-59LB...
Replacement for Dometic DOTR12CB Over-the-Range Microwave
Looking for a Dometic DOTR12CB Over-the-Range Microwave wall mount replacement. 21 7/8 wide by 16 5/8. Can you recommend a wall mount unit or a new magnetron for it but I think its obsolete | We have one over the range style microwave that...
Correct Wiring Adapter To Install Redarc Tow-Pro Liberty Brake Controller on 1999 Ford F-350
I have a 1999 Ford F350 and need an adapter harness to plug in my factory harness. The harness need to have female round receptacle | In order to install the Redarc Tow-Pro Liberty Brake Controller part # RED24FR on a 1999 Ford F-350 you will...
Finding Leak on 5th Airbone Cushioned Pin Box
Suggestions? | If you are having issues with losing air pressure with your 5th Airborne Premium Fifth Wheel Air Ride Coupler part # 5AB-E1621-16K then you would need to inflate the airbag and then spray this and the fittings down with a soapy...
Towing a Can Am Side by Side with a Fifth Wheel's Hitch
I am looking to purchase a hitch set-up to weld to the rear of a 2009 Jayco Designer fifth-wheel trailer. I purchased a Can am side-by-side that weighs 1600 lbs. and will be loaded in a 7 X 12foot tandem axle utility trailer 1500 lbs.. Is...
Replacement Slide Out Motor for Part VT00310R
Im trying to find this slide motor assembly and cant seem to find it. Pictures and included. That mounting bracket is the problem. I dont see anything on your site like it. Help! | To replace your VT00310R slide out motor you need the Lippert...
What is Standard Cone Angle for Trailer Wheel Lug Nuts
Does the length of the cone make a difference. All I seen have a shorter cone than the ones Im wanting to replace on my 2003 Jayco fifth wheel. | There are different angled cones for the wheel lug nuts found on trailer wheels and hubs. The most...
How To Choose Correct Replacement Leaf Springs for Jayco Designer 5th Wheel
Hi. I’m looking to replace all my leaf springs and components on my camper. Could you steer me to the right kit for this camper. My leaf springs are 5 leaf now. One has broken. Thinking about going up to a 6 leaf. | In order to choose the...
Replacement Bearing Seal for a Dexter 010-063-00
I am looking for a replacement bearing seal to dexter 010-063-00, if there is one. Someone had said the 010-036-00 is a good replacement but I need to confirm that. | To replace a dexter 010-063-00 seal you will need the Grease Seals item #...
2004 Dutchman Sport 5th Wheel Landing Recommendations
I need to replace the landing gear for my 2004 Dutchman Sport 5th wheel. What landing gear do you recommend? Do these just bolt right on to replace the old ones? | For your 2004 Dutchman Sport 5th Wheel I recommend the Bulldog # BD500162 and...
Replacement Landing Gear for 2004 Dutchman Sport 30 Travel Trailer
I need to replace my front jacks on my fifth wheel . I only need the jacks since I already have the motor. I have a 2004 Dutchman sport 30 would 8000 pound jacks be enough to raise and lower it | Landing gear is designed to stabilize a portion...
Which Dexter EZ Flex Kit Fits Triple Axle Trailer with 35 inch Axle Spacing
looking at dexter k71-567-00 just want to make sure correct parts .The trailer in video is the same trailer as mine 35 inch spacing equalizers look 8 inch rear 9 inch front 2 1/4 shackles 1 3/4 springs | Yes the Dexter E-Z Flex Suspension Kit...
Is It Better For Demco Recon Gooseneck-to-5th Wheel to Sit in Front of Axle
I have an aftermarket flat bae and When this hitch is installed as per the instructions. It sits directly over the axle. Would it be better to spin the hitch 180° so it is slightly in front of the rear axle? | No, it is perfectly fine for the...
Filter Your Search
Contact and Help