Does The Rhino-Rack Universal Load Assist Work With Yakima Jet Stream Crosbars?
Hi, I have a yakima jet stream bar rook rack for my car. Is Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading compatible for my jet stream ? | Yes the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading # RR-RUSL...
Trailer Hitch Recommendation for 2022 Acura ILX for Bike Racks
Hi there. I drive a 2022 acura ilx and want to install a bike rack on the back. It looks like you guys have 2 different tow hitch for that. Curt and draw tite. Id like to know the difference between them. And which one is a better choice for...
Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Is Silicone Needed For Kat's Heaters Oil or Transmission Pan Heating
Hello, Will this work on my 2014 Acura ILX 2.0? Also, does this pad come with aluminum silicone? If not, is it required in the installation like some competitors? Thanks | Yes, the Kat's Heaters Oil or Transmission Pan Heating Pad - 4" x 5"...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Do Holes Need to Be Drilled to Install Hitch in 2016 Acura ILX
I just wanted to understand if I will need to drill any holes on my frame or the hitch are designed in a way to use any existing holes? Im sorry, but this is my first time and wanted to be sure before buying. Thanks a lot in advance, | To install...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Troubleshooting Water Pump Not Working
Im trying to hook up a Hydromax water pump in my houseboat. It will not pull any water. The pump comes on but thats it. Got it to work once after removing it from under the sink but thats it. Any suggestions would greatly be appreciated....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Will the Thule Pulse XL Roof Cargo Box Fit on the Factory Crossbars on a 2011 Mercedes R350
Hi, I am planning to purchase the Mercedes Benz Basic Roof Rackinch for my 2011 R350. I would like a roof cargo carrier that will work with the Mercedes Benz rack. Will this box fit on the MB Basic Roof Rack?inch The MB Roof Rack has a channel...
How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer
I HAVE A 1979 AVION TRAVEL TRALER WITH 4 SEPERATE AXELS. THE SPINDEL IS BENT ON THE RIGHT FRONT AXEL, THEREFOR WEARING MY TIRE DOWN WITHIN 3,000 MILES. DO YOU HAVE ANY IDEA WERE I MIGHT PURCHASE AN AXEL? THANK YOU | In order to determine which...
Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...
Is There a 2 Inch Hitch for a 2019 Acura ILX
Looking for a 2 trailer hitch receiver for a 2019 Acura iLX . Only saw 1 1/4 what do you recommend? | The only trailer hitch options available for a 2019 Acura ILX are 1-1/4", the Curt Trailer Hitch Receiver part # C11391 is what I recommend...
Availability of Hitch for 2006 Mercedes R500
Does this fit a 2006 Mercedes R500? | We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements...
Can a 4-Bike Platform Bike Rack be Used on a 1-1/4 Inch Trailer Hitch on a 2011 Mercedes R350
I have a 2011 Mercedes R350 with a 1-1/4 inch hitch. the label on the OEM hitch states that the car has a 280 pound tongue weight. Can I use the Yakima holdup 2 rack with 1-1/4 inch hitch and add to it the Yakima holdup +2 2 bike add on? ...
Torque Specifications to Install the Curt Hitch Receiver C13103 on a 2009 Mercedes-Benz R-Class
The torque setting was not in my instructions. What is the correct torque for the # C13103? | The M10 x 1.50 CL 10.9 fasteners will need to be torqued down to 45 lbs-ft and the 7/16" 59 lb-ft for the Curt Trailer Hitch Receiver # C13103. This...
Wiring Kit Compatible with 2011 Mercedes-Benz R-Class
Hi, I reviewed questions and eTrailer expert answers related to an R class hitch installation. The thread below caused a bit of confusion: https://www.etrailer.com/question-117319.html. My 2011 should be electrically the same as the 2012 model...
Trailer Hitch For A 2009 Mercedes-Benz R350
Hello, I was wondering if part #C13190 will fit a 2009 Mercedes r350? Thanks in advance for responding! | We do have a trailer hitch option for your 2009 Mercedes-Benz R350, but the # C13190 that you mentioned is not going to fit your vehicle....
Trailer Hitch Recommendation for 2018 Acura ILX
I need a hitch for a 2018 Acura ILX, does this fit? | Yes, the Curt # C11391 that you referenced is a confirmed fit for your 2018 Acura ILX and would be the hitch we would recommend. |
I have the Cub blind spot detector. Last fall while we were traveling something hit the plastic housing for the radar. Do you sell just the housing. Any help with this issue would be appreciated. Thank you Bill | We don't carry just the housing...
Filter Your Search
Contact and Help