Parts Included with Air Lift # AL25804 Air Shock Controller Compressor
Does this include an air tank, air compressor andand, pressure switch? | The Air Lift Air Shock Controller Compressor, part # AL25804 includes the onboard compressor; dash mounted gauge panel; hardware and air lines. An air tank isn't included....
4-Way Trailer Wiring Recommendation 2003 Ford Windstar
Do you know what trailer light module I need to connect a 2003 Ford Windstar to a Yakima sport trailer flat 4-way | Hey Scott, for your 2003 Ford Windstar we don't have any custom fit trailer wiring harnesses available so you would have to go...
Recommended Trunk-Mount Bike Carrier For 2004 Mazda RX-8 With Spoiler
I want to buy my daughter a bike rack for her 2004 Mazda RX8 coupe for Christmas. Do you have truck mounted models for that year? I cant tell from your web page whether they will fit the model with a fast back and spoiler. Thanks. | We do have...
Wire Functions and Locations on Relay for Trailer Wiring Harness HM40615 on 2003 Ford Windstar
I took the wires off the relay for the trailer harness now I have no vehicle turn or tail lights Where do they go back on in order | I spoke with my contact at Hopkins about wiring harness # HM40615. Looking at the relay with the metal tab facing...
Will Trailer Shackle Straps Rust
What would cause shackles have a rusted color on it after less then 3 months of being installed? | The shackles like the # TRSL225 are bare steel. With enough contact with moisture they will begin to show signs of surface rust. Especially on...
Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
Trailer Wiring Harness Options for a 2003 Ford Windstar
Will the Hopkins 48895 converter kit work on this vehicle? | Hopkins tail light converter # HM48895 is a universal fit item so you can use it on your 2003 Ford Windstar. There are other, custom fit options available though. Check the build-date...
Troubleshooting No Power to Fogatti Tankless Water Heater or Remote
I have a Fogatti tankless water heater and have no power at the unit or the remote controller. Any suggestions | The first things to check are the On/Off switch on your Fogatti water heater, like part # LSB64FR, and the fuse located below...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Which Wiring Harness Do I Need For My 2003 Ford Windstar?
ford windstar manufactured o5/2003 will light kit hm40615 fit | Your 2003 Ford Windstar will require the Plug-N-Tow (R) Low-Side Switching Hardwire Kit # 36345 since it was produced after October 2002. Ford switched to a negative power input...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Installing Trailer Wiring Harness for a 1998 Ford Windstar
I need an electrical schematic to install the wiring into my 1998 Winstar | The wiring harness for your 1998 Ford Windstar is a plug and play harness, part # C55346. It plugs into your tail light assemblies. I have also included a link to the...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Do I Need a Custom Fit Wiring Harness for 2003 Ford Windstar Trailer Wiring
What exactly will happen if I try to splice in a simple 4-wire trailer kit into my 03 Ford windstar as opposed to buying the custom kit? | If you try to splice a simple 4-way connector to your 2003 Ford Windstar you will not get proper taillight...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Wiring Diagram for 7-Pole RV Trailer Connectors For a 1995 Ford Windstar GL Van
I am looking for the wiring diagram for the adapter above. It is on a 1995 ford windstar GL van. I was wondering if u guys had the diagram. Thank You | Yes, we have a wiring diagram for the 7-Pole, RV-Style Trailer Socket, # PK12-707E. I have...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Recommendations for Wiring Harness on 2002 Ford Windstar and Trailer
Why dont you tell or show a diagram on which side of the connector goes to the vehicle and which one goes to the trailer. I cant figure it our from the package direction or your web site. | We do have a wiring harness option for you, but the...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Towing Capacity of a 2000 Ford Windstar and Trailer Hitch and Wiring Recommendations
Towing Capability | Your 2000 Ford Windstar has a gross trailer weight rating of 2,000 pounds unless it has the optional trailer tow package AND 3.8 liter motor. If it has both of those features then it is rated for up to 3,500 pounds. Curt...
Filter Your Search
Contact and Help