Wire Functions and Locations on Relay for Trailer Wiring Harness HM40615 on 2003 Ford Windstar
Question:
I took the wires off the relay for the trailer harness now I have no vehicle turn or tail lights Where do they go back on in order
asked by: Rs
0
Expert Reply:
I spoke with my contact at Hopkins about wiring harness # HM40615. Looking at the relay with the metal tab facing up and pointed away from you the terminals have the following functions:
12 o'clock position = red power wire from converter to relay
3 o'clock = white ground wire
6 o'clock = red power wire out to vehicle battery
9 o'clock = black wire to vehicle left side connectors
expert reply by:
Michael H
0
Product Page this Question was Asked From
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Video: Review of Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM40615
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Q&A: Trailer Wiring Harness Options for a 2003 Ford Windstar
- Q&A: Do I Need a Custom Fit Wiring Harness for 2003 Ford Windstar Trailer Wiring
- Q&A: Troubleshooting Trailer Running Lights Staying On when Vehicle is Turned Off
- Q&A: Can You Run a Battery Charge Line with Magnetic Dinghy Tow Lights
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Hitch for a 2003 Ford Windstar Fits Around and Allows Access to the Spare Tire
- Q&A: Recommendations for Wiring Harness on 2002 Ford Windstar and Trailer
Steve
7/12/2020
You said black wire to vehicle left side connectors?? What does the black wire connect to? Running lights? Stop lights? This is the signal wire that turns power on for the converter via the relay. What circuit is supposed to activate the relay, running lights?