bing tracking image

R-Class  x   >   Rabbit  x   >   Independence  x   >   FRED Chassis  x   >  

Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel

I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...

Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103

do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...

Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer

Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...

Width of Channel on the Curt Channel Style Adjustable Ballmount C45900

Can you.let me know the width of the channel on the curt c45900 Regards | The interior channel width of the Curt adjustable ball mount part # C45900 that you referenced is 3 inches. |

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103

I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....

Trailer Hitch for a 2012 Mercedes R350 BlueTec

Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...

Overall Dimensions of the 90 Degree Elbow Part of Lippert Waste Master RV Sewer Hose # LC359724

Hello, can you tell me the o/a dimensions of Lippert Components waste master 90 degree elbow fitting including integrated handle and shut-off lever? Im concerned about the thickness of the elbow fitting under my service panel in the compartment....

Availability Of SumoSprings Helper Springs For 2008 Tiffin Built On Freightliner FRED Chassis

do you have helper springs to fit this frame 26000 freightliner , we have a 08 tiffin with the front engine and it seems to sway a lot even with new factory shocks . what do you recommend . thanks | There are helper spring options for your 2008...

Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103

Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...

SumoSprings Fit for Tiffin Allegro Open Road on 2008 Freightliner FRED Chassis

I have a Tiffin Allegro Open Road BA32 FRED. It has a Freightliner 2008 MC Front Engine Motor Chassis. Can U Verify that this RV can use the SSF-501-40 Sumo spring and the SSR-502-54 | I checked with SuperSprings (the manufacturer of SumoSprings)...

Availability of Hitch for 2006 Mercedes R500

Does this fit a 2006 Mercedes R500? | We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements...

Will the Thule Pulse XL Roof Cargo Box Fit on the Factory Crossbars on a 2011 Mercedes R350

Hi, I am planning to purchase the Mercedes Benz Basic Roof Rackinch for my 2011 R350. I would like a roof cargo carrier that will work with the Mercedes Benz rack. Will this box fit on the MB Basic Roof Rack?inch The MB Roof Rack has a channel...

Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI

Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...

Wiring Kit Compatible with 2011 Mercedes-Benz R-Class

Hi, I reviewed questions and eTrailer expert answers related to an R class hitch installation. The thread below caused a bit of confusion: https://www.etrailer.com/question-117319.html. My 2011 should be electrically the same as the 2012 model...

Can a Derale Transmission Cooler be Used with an Allison 2200MH Transmission on a Motorhome

I have a 2007 Fleetwood Allegro FRED motorhome with an Allison 2200MH transmission. It appears to have 12AN fittings which means the hose inner diameter is probably .69” or close to it. If I add a transmission cooler and the hose or cooler...

Red Beehive Marker And Clearance Light In 2-1/2 Inch Round

Need 2 of a mc21as in red are they available? | The Beehive Side Marker and Clearance Light w/ Mounting Bracket, 1 Wire - Amber # MC21AS is the only light that comes with the bracket. If you want a red light in the same size, we have the Sealed...

How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer

I HAVE A 1979 AVION TRAVEL TRALER WITH 4 SEPERATE AXELS. THE SPINDEL IS BENT ON THE RIGHT FRONT AXEL, THEREFOR WEARING MY TIRE DOWN WITHIN 3,000 MILES. DO YOU HAVE ANY IDEA WERE I MIGHT PURCHASE AN AXEL? THANK YOU | In order to determine which...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

2006 Freightliner FRED RV Chassis Replacement Trailer Hitch Options

I need a hitch for a 2006 Freightliner FRED RV chassis? The one on the chassis now is a Curt 81201 which is discontinued. | For your application you'll need to use one of our universal RV trailer hitches like the Curt Hitch # C13704. This fits...

Filter Your Search