Hitch And Bike Rack For Carrying Two Lectric XP4 Ebikes On A 2016 Chrysler 200
I have recently purchased 2 Lectric XP4. I need to add a class 1 receiver to a Chrysler 200 4 cylinder 800 total weight for the car. The bikes are 71 pounds with battery. What are my options for an ebike rack? Thanks in advance. | Hi Gregg! We...
Trailer Hitch Recommendation for a 2012 Chrysler 200 Convertible
The hitch Im looking at is for the Chrysler 200. I have the 200 convertible . Are they the same ? | There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit....
Flat Tow Wiring Harness For A 2013 Chrysler 200
I have a 2013 Chrysler 200 which we tow on a Kar kaddy I was looking for a connector that I can connect to the front of the car wiring so the tail lights on the car would also show turn and stop lights Do you have something like that? | Yes...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Trailer Hitch and Wiring for a 2012 Chrysler 200
Can I use this hitch on my Chrysler 200 to tow a small pop up camper? | Draw-Tite trailer hitch # 24871 for the 2012 Chrysler 200 is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Provided that the trailer is within...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Recommended Hitch for a 2015 Chrysler 200
hello good morning I am very interested in buying a hitch trailer for my 2015 Chrysler 200c. Thank you | To add a hitch to your 2015 Chrysler 200, I recommend the Curt item # C11403. This hitch is custom fit and bolts to your Chrysler with included...
Replacement Bike Rack Cradle For A Rhode Gear Bike Rack
Do you carry any replacement cradles that will fit a 7/8inch diameter tube as I have on an older Rhode Gear 2-bike Hitch Shuttle rack? Thanks! | When it comes to the replacement cradles for your Rhode Gear 2 Bike Rack The Replacement Cradle...
How To Choose Correct Bearing Buddy for Tractor Supply Small Utility Trailer
I measured the hub and ordered the Bearing Buddy that measured 1.968. That is a little bit too small. Is Bearing Buddy that measures 1.980 the best option for this hub? | The correct Bearing Buddy Bearing Protector like part # BB1980A will be...
Recommended Bike Rack and Trailer Hitch Receiver 2012 Chrysler 200 Convertible
installation of a hitch to carry two bikes on a 2012 Chrysler 200 convertible hard top can I have a hitch installed on this car I already have the support plattform for two bikes thank you | We have two trailer hitch receivers for your 2012...
Where Does Kat's Engine Block Heater Install on 2012 Chrysler 200 3.6 Liter Install
Where is the location to install a block heater on a 2013 chrysler 200 3.6 L. | Your 2013 Chrysler 200 has the transverse Pentastar 3.6 liter which Kat's recommends their heater part # KH11814. The cartridge location you need to use is right...
Recommended Roof Rack And Kayak Carrier For 2012 Chrysler 200
My son has a 2012 chrysler 200 with a regular roof. He has a fishing kayak that he would like to transport with his vehicle. Would like to know if they make carriers for his vehichle and if so what is the best system? Thank you for your help....
Measurements on the Curt Trailer Hitch Class II Receiver
I have some questions about the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 Item # C12064 I need to know the measurement between the frame rails and the height of the frame rails. I want to see if I can custom adapt it to a...
Troubleshooting Carriage Bolt that Keeps Turning When Installing Draw Tite 24919
I just installed a Draw Tite hitch on my 2014 Chrysler 200 with twin exhaust pipes, when I tried to tighten one of the bolts the bolt just kept turning with the nut once it was tightened. So I could not torque it. BTW Its much harder to put...
Recommended Trailer Hitch Cargo Carrier For Pop-Up Tent
Can you recommend a product that I can attached a hitch receiver for my 2015 Chrysler 200 to use a small pop up tent. | There is not a hitch mounting application for a tent if that is what you are referring to. We have some tents that attach...
Parts to Tow a Small Trailer with a 2015 Chrysler 200
Hi, Is it possible to tow a jet ski with a Chrysler 200 s, yr:2015. | We do have everything you need to tow a jet ski with your 2015 Chrysler 200. I recommend using the Curt Trailer Hitch # C11403 along with the Curt T-Connector Wiring # C56242....
Trailer Hitch Recommendation for a 2007 Kia Rondo
I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...
Thule K-Summit Tire Chain Max Speed Rating
what is the max safe driving speed when using this system | The recommended top speed on the Thule K-Summit Snow Tire Chains, part # TH02230K44 is 30 miles per hour (50 km/h). |
Parts Needed to Flat Tow 2012 Chrysler 200 Convertible
will this work on a 2012 Chrysler 200 convertible | I did check with Roadmaster and the Roadmaster EZ4 Base Plate Kit # RM-52297-4 that you referenced is only a fit for the sedan version of the Chrysler 200. It will not work with the 200 convertible....
Filter Your Search
Contact and Help