Rodeo x > Rabbit Pickup x > R1S x > 300 x >

Result:

Articles

Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22

Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Trailer Wiring Harness For A 2018 Chrysler 300S

Im looking at ordering this wiring harness for a 2018 chrysler 300s but there are 2 different wiring harnesses listed for my vehicle which one should I buy and whats the difference | Hi Jamie! For your 2018 Chrysler 300S, I recommend the Curt...

Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?

For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...

How to Determine Which Ball Mount Will Have Enough Rise for Curt Hitch on a 2005 Chrysler 300c

So I am considering the curt class III hitch #13465 for my 2005 Chrysler 300c. I have seen a previously answered question suggesting the #d-26 ball mount would be recommended to clear the rear bumper. I notice that the D-26 has a lift of 3/4...

Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?

Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...

Will Trailer Hitch for 2012 Chrysler 300 Fit SRT8

I see you have trailer hitches for a 2012 Chrysler 300. Do they also fit the SRT8 version of the 300? | Hey Jim, welcome back! The Curt hitches fit the 300C and 300S. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76145 is confirmed to fit...

Tow Bar for 1981 Volkswagen Rabbit Pickup

What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...

Will The Curt Trailer Hitch Receiver # C13236 Fit A 2019 Chrysler 300

Is the c13236 hitch fit my 2019 chrysler 300 6cyl with dual exhaust | Hey Ken, Yes, the Curt Trailer Hitch Receiver # C13236 is listed as a fit for all models of the 2019 Chrysler 300 so it would be a fit. If you plan on towing a trailer or...

Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20

Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |

Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer

I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...

How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S

what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...

3 Bike Platform Bike Rack Recommendation for 2007 Chrysler 300

I am looking for a hitch mount platform bike rack that can hold three bikes. I have a 2007 Chrysler 300. Can you recommend a product for my needs? Thanks! | For a 3-bike platform rack the Kuat Transfer part # KU24FR would be a great option....

Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed

can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...

Measuring for Trailer Hitch Receiver Ground Clearance on a 2013 Chrysler 300

I am looking at either the Drawtite 76145 or Curt C13093 receiver for my 2013 Chrysler 300. It appears that the receiver clearance from the ground is more on the Drawtite than the Curt. I couldnt find any specific dimensions from the frame...

Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215

I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...

4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo

HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...

Correct Trailer Hitch for a 2013 Chrysler 300S

What trailer hitch fits my 2013 Chrysler 300s | The trailer hitch options for 2013 Chrysler 300 are all compatible with the S models. I recommend going with the larger 2" opening due to the higher capacity and abundance of hitched mounted accessories...