Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Bike Rack Recommendation for 2008 Infiniti G35 that Allows Rear Trunk Lid to Open
Hi, currently looking for a trunk mount for max 2 MTB Orbea Oiz on a 2008 Infiniti G35x. Ideally one that can stay on and allows trunk to open. Do you work with shops in the DMV area that install these? Thanks | Hey Kenneth, there isn't a trunk...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Availability of an A-Frame Coupler that is 45 Degrees and Not 50 Degrees
Is there an A frame coupler that is NOT a 50* angle? I have an older stock trailer and it needs like a 45*. | All of the A-frame couplers we carry are for the standard 50 degree A-frames. What you could do, since your A-frame is a lower angle,...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
Is Trailer Suspension U-Bolt Plate Supposed to Bend and What is Torque Spec for 3/8" U-Bolts
So, I noticed in the video the spring plate does bend when tightened. How much torque was used? This is normal on the spring plates? They should bend slightly? I freaked out after I noticed my bent. But this is how it should be? | Trailer...
Difficulty Hooking on Bottom Trunk Mount Bike Rack Straps to Truck or Hatch
Hello, my trunk is so tight there is not enough space for the hooks to fit at the bottom of the trunk lid for my 2007 Infinity G35. Attaching these hooks under the bumper is not an option because it is very soft and will pucker the bumper. I...
How to Correct Sagging Class I Hitch and Bike Rack on 2006 Infiniti G35 Coupe
Wondering if it is possible to have someone weld a higher class hitch to the frame on Infinity G35 coupe? Is this possible? Have a class I now and it is sagging badly Thanks! | Trailer hitch makers generally produce hitches that are designed...
Trailer Hitch Recommendation for a 2007 Kia Rondo
I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...
Trailer Hitch and Ball Recommendation for 2005 Infiniti G35 Sedan
Hi i wanted to know I have a 2005 infiniti g35 sedan and I bought a small boat and i wanted to know what hitch do you guys recommend, and if you guys have 7/8 ball size. thanks | We do have the Curt hitch part # C11482 which you referenced that...
Recommended Trailer Hitch Receiver for 2011 Kia Rondo
I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...
Wiring Harness With Easy Install For 2009 Kia Rondo
I am interested in the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2009 Kia Rondo. One of the issues I see in the reviews is that the green wire from the drivers side to the passenger side can be too short....
Hitch Recommendation for a 2004 Infiniti G35X Sedan
Hello,I have a G35X Infiniti 2004. Are the instructions for this video for the 2011 model the same for the 2004?Thank you, | The Curt Hitch part # C11482 that you referenced is designed to fit 2003-2006 Infiniti G35 Sedans, so it would not fit...
Compatible Trailer Hitch Receiver to Fit 2003 Infiniti G35 M6 Coupe
I just want to know if a trailer hitch is avalaible for my g35 2003 M6. | The Curt # C11483 is designed to fit your 2003 Infiniti G35 coupe. There is some drilling and fascia trimming to install it but all the necessary hardware is included....
Installation Details for Installing the Curt Trailer Hitch, # 247482 on a 2005 Infiniti G35
have you guys done an install of this hitch on any of the 03-06 sedans? I heard the fishing part is a pain. thanks! | We have a couple of videos featuring an Infiniti G35 but no hitch installations. Fish Wiring can be a little cumbersome,...
Trailer Hitch For A 2006 Infiniti G35 Coupe
the video i watched was for a sedan. u guys have a hitch for a 2006 g35 coupe? or does the same one fit the sedan and the coupe. thx for any intel. | The Curt Trailer Hitch Receiver # C11483 is the correct trailer hitch for your 2006 Infiniti...
Using a T2 Classic for 2 Inch Hitches with a 2005 Infiniti G35 Coupe with 1-1/4 Inch Curt Hitch
I have a infiniti G35 coupe. it also has the Factory Spoiler. also a Thule T2 Classic 2 Bike Platform Rack - 2. i know i would need a 1-1/4inch to 2inch adapter. the hitch for my model car says it needs a strap. how would it attach using this...
Recommended Hitch and Related Items for 2009 Kia Rondo V6 Towing Camper Trailer
What would be best hitch/towing set up to order from you guys for a 07 to 09Rondo V6 with a view to owning a camper trailer? Would a transmission cooler enable higher tow loads? I have not bought the Rondo yet. ..still looking. She will be used...
Transmission Cooler Recommendation for a 2004 Infiniti G35
Hello and thank you very much for the last response. The information was very helpful and the links allowed me to find the product quick. Now my question....I recently asked if I should install a transmission cooler on my 2003 4Runner. I got...
Recommended Trunk-Mount Bike Carrier For 2008 Infiniti G35x Sedan
What is the best trunk mounted bike rack for a 2008 Infiniti G35x? I Do not have spoiler. Ive read a bit about Thule TH910XT and the more expensive OutWay, but they both seem to have issues with getting it attached under trunk. I saw the...
Recommended Adapter to Convert 1-1/4 Inch Receiver on Curt 11482 Hitch to 2 Inch Receiver
Please help me find a 1-1/4inch to 2inch receiver adapter that will best fit in the 1-1/4inch Curt #11482 class 1 hitch. The total weight of the bike rack and the load is less than 100 pounds. Thank you in advance. | For a hitch adapter...
Kayak Carrier Options for 2006 Infiniti G35 4-Door Without Roof Rack
need to find a roof rack system for a 2006 Infiniti G35 4-door sedan. need to be able to roof rack a 10-13 foot kayak, max weight of about 75 lbs. Do you know of any kits you may have that would be able to accomplish this? | I suggest the Rhino-Rack...
Trailer Hitch Receiver Fit on 2006 Infiniti G35 Sedan
2006 infiniti g35 sedan trailer hitch for this vehicle, if so can you send me that would fit. | There is a trailer hitch receiver that will fit your 2006 Infiniti G3 sedan, with the correct fit for a hitch being the following: - Curt Trailer...
Noise Level And Weight Of Magnaflow Exhaust System On 2007 G35 Coupe
How loud is the exhaust and how much does it weigh compared to the stock exhaust? | I spoke with my contact at Magnaflow about your 2007 Infiniti G35 Coupe. They told me that the Stainless Steel Cat-Back Exhaust System, part # MF16641 is not...
Filter Your Search
Contact and Help