Result:

Will this fit a 1997 Ford Ranger XLT long bed? | Hey Ilya! Yes, the Erickson Retractable Tie-Down Anchors for Truck Bed Stake Pockets # EM01003 will fit the stake pockets on your 1997 Ford Ranger XLT long bed. If you have any other questions...

I was wondering if you had double lip grease seals that would replace Dexter Marine #81312. These are trailer seals that measure 1.5 X 2.31 with 1.25 inner bearings. Thanks for any info. | We have a grease seal with a 1.5" inner diameter and...

Do i have to drill in order to install the hitch on my base model ranger | When installing the Curt Front Mount Hitch, # 13138 on a 1997 Ford Ranger, you will need to enlarge some access holes but you will not be drilling any new holes. Please...

i recently made my 97 ford ranger 2wd 2.3L 5speed into a flat bed pick up. i used trailer lights that have brake tail lights and turn signals. i have the part installed and i only have turn signals and tail lights. tied grounding bolts to from...

can I tow all 4 down with out taking out drive shaft flat tow a 97 ranger manual trans | I did some checking and yes, your 1997 Ford Ranger with a manual transmission is flat-towable without having to remove or disconnect the drive shaft. You'd...

I want to hook up a 1997 rord ranger xlt to a tent trailer .The trailer weighs about 2000# and is wired for electric brakes with a 7 blade connector .I think I need a hitch ,brake controller and the wiring for the Ranger please help | I'd be...

Hi I am doing a drive away service towing my vehicle behind a semi. The trailer rental place is pretty positive and says they install tow bars on front steel bumpers all the time. I am a little skeptical everyone is giving me mixed reviews....

I have a 97 Ford Ranger Extra Cab w/ a fiberglass lid on the bed. I have no rack on the roof of the cab. Im thinking of the T-Rack in the back and use the Sea Sucker Monkey Bar Roof Rack to secure my Hobie Mirage Compass kayak onto the cab. Since...

How long are the rods for this when fully extended and when retracted? And are they flattened or circular at the ends? | The two rods on the Polar T-Handle Latch # PLR5730 are each 48 inches long. When locked the assembly will have an overall...

What years ford ranger will this hitch fit? | The Draw-Tite Class III Max-Frame Trailer Hitch Receiver, # 75082, will fit the following Ford Rangers: 1998 - 2010 Ford Ranger 1983 - 1997 Ford Ranger, All except GT models I have included a link...

Can I flat tow 97 ranger 4 cyl 2wd auto trans what do l need to do | I was able to find an online version of the owner's manual for your 1997 Ford Ranger and on page 244 it looks like you can flat (recreational) tow your vehicle but you will...

I am prepping a 1997 Ford Ranger to do moderate flat land towing with a PJ 5x8 single axle dump trailer w 5,200 GVWR. Obviously more capacity than the Ranger is designed for but need to make do for a year or 2 till I purchase a full size 3/4...

1994 GMC K2500 / 1997 Ford Ranger primary tow vehicles I have this converter TowReady #118158 currently wired to my trailer I really wanted amber turn signals and very much like it, and would like to purchase another one but have a few questions...

Why is ground wire not integrated into the converter? Is there an advantage? | Yes, the advantage is that you will get a better ground connection with an independent ground wire on a trailer wiring harness such as # 40215 for your 1997 Ford...

Will this item fit a 1997 2wd flareside Ford Ranger? Thanks. | Curt trailer hitch # 13138 will fit all models of the 1997 Ford Ranger except the GT models. So it will fit your stepside model as long as it is not a GT. I have linked the instructions...

will the 75082 fit a 1997 ford ranger? | We have several trailer hitches for your 1997 Ford Ranger but # 75082 will fit.Please note it will not fit GT models. If you plan on doing some towing you might be interested in etrailer ball mount kit...

If I only want a breakaway braking function on my 1997 Ranger towed behind a class A motorhome do you have a product that will provide this function? | The only way to use the RoadMaster BrakeAway Kit for BrakeMaster Systems # RM-8600 on your...

I have the ranger splash with the narrow bed 48inch Will this item fit? | The ETruXedo TruXport Soft, Roll-Up Tonneau Cover part # TX247101 is a fit for a 1997 Ford Ranger with 6' Stepside Bed. It looks like the Splash models came with a 6'...

Can a 1997 Ford Ranger accept trailer light loading with no overload issues? | The recommended trailer wiring harness for your 1997 Ford Ranger is the Tow Ready # 118325. As long as you don't exceed the amperage ratings of the wiring (Stop/turn...

Are these 2 locks keyed alike and if not can you get them keyed alike | Yes, my contact at Curt Manufacturing confirmed that the two locks and the four keys included in their Lock Set # C23556 are keyed identically. This lock kit is intended...

Can I use your breakaway system without a supplemental braking system ?. | Without a Supplemental Braking System # HM39524 the Hopkins Replacement Break-Away Switch # HM20010 does not have a braking system to activate when your flat towed vehicle...

I have a 1997 ford ranger 3.0 liter engine will this work on it | I have a great catalytic converter option for you. Based on my research, I confirmed with Magnaflow that the only way to figure out if the MagnaFlow Stainless Steel Catalytic...

EX1560. Need to know if this replacement parts will fit my 1997 Ford Ranger XLT. I know there are different bed sizes, will that matter? | We have replacement tarps that fit the Extang BlackMax tonneau cover on your 1997 Ford Ranger, but the...

I have this same unit i purchased from etrailer less then a year ago, and my question is, is it normal that when the left or right turn signals are activated and you apply the brakes that the turn signals will then blink at a different time...