Recommended Equipment for Towing a Trailer with a 1993 Buick Roadmaster
I tow a 6x12 single axle trailer with my Silverado which has a 2 inch receiver class III hitch. I need a hitch for my 93 Roadmaster sedan Limited that has a 2 inch receiver but I do not see any Class III I do not need the load carrying ability...
Class 3 Trailer Hitch For A 1994 Buick Roadmaster Estate Wagon
Hi, Do you make a class III hitch for 5K pound capacity for a 1994 Buick Roadmaster Estate Wagon ? | Hi Daniel, nice car! We do have an option that may fit your 94 Buick Roadmaster Estate Wagon, but it doesn't look like there is a custom...
Thule Spare Me Rack on 2010 Rav4 with Back Up Camera
I see that I cannot use a Thule Spare Me 2 bike carrier if I have a backup camera on my 2010 Rav4. Why? What are the alternatives? I can live without the camera for a short term. Thanks! | I spoke with the folks at Thule regarding the spare...
Crossbar Kit Recommendation to Fit with Retrax XR Tonneau Cover on a 2022 Ford Raptor
Hi I have a truck 2022 Ford Raptor with retrax XR tonneau cover with rails compatible with T-slot accessories. Can you please recommend cross bars that would work with the rails on the retrax xr tonneau cover? Thank you | Hey Bora, thanks...
Availability of Class III Hitch for 1996 Buick Roadmaster Estate Station Wagon
I have a 1996 Buick Estate Wagon. Looking for a class 3 receiver. Has to fit the wagon not sedan......thanks | We do offer a Class II hitch for the 1996 Buick Roadmaster Estate Wagon with a respectable 3500 lb towing/350 lb tongue weight capacity,...
Is There a Class III 2" Trailer Hitch Receiver Available For a 1995 Buick Roadmaster?
Do you sell class 3 hitch for 95 buick roadmaster with tow package? | The Curt Trailer Hitch Receiver # C12009 class II receiver is our only custom fit receiver for your 1995 Buick Roadmaster. There are a couple ways you can get to a 2" opening...
Recommended Trailer Hitch for 1994 Buick Roadmaster Estate Wagon
I have a 1994 Buick Road master wagon and have been searching for a class 3 trailer hitch without success. Im interested in possibly purchasing your Draw tite class 3 item#75676 which I noticed stated it May Not fit my wagon. My wagon is built...
Does a Trailer Hitch Mounted Cargo Carrier Require a Light Kit on a 1995 Buick Roadmaster Wagon
Do I need to have lights wired to my car 95 Buick Roadmaster wagon if the cargo carrier isnt wide enough to obscure the tail lights? | If the cargo carrier and the cargo loaded on it do not obscure the vehicle tail lights, you do not have to...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Differences Between Class II and Class III Trailer Hitches
What is the exact difference between a class 2 and class 3 hitch for a 1996 Buick Roadmaster Estate Wagon? Is it strength of materials or design or both? Can I purchase fabrication drawings and specification specifics from you? Any help...
Can Hopkins Trailer Wiring Kit Cause 1996 Buick Roadmaster Fuel Pump to Stop Working
I used this harness and on my 96 Buick Roadmaster Wagon and followed the instruction where to plug into which side and also attached the white ground. After install this causes my fuel pump to no longer work until I unplug it and plug the tail...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Recommended Weight Distribution System For Prolite S Camping Trailer
Hi, my Prolite S camping trailer is @ 1600lb heavy, tongue weight is 200lb, what weight distribution you can recommended for me?? Plese ASAP. Thanks | For your Prolite S camping trailer, I recommend the Reese Steadi-Flex Weight Distribution...
Factory Luggage Rack Capacity Buick 1996 Roadmaster Station Wagon
How much weight can the roof rack or carrier on Buick 96 station wagon Roadmaster hold with out damaging the roof? | I was lucky enough to be able to find a .pdf copy of the 1996 Buick Roadmaster Station Wagon owner's manual online. Buick states...
What Gauge Wire is the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter # HM47180?
What gauge wire is used in the pigtail with #HM47180 | I went out to the warehouse and pulled the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter item # HM47180 off the shelf. The brake controller wire is 16 gauge the other...
Trailer Hitch Recommendation for a 1994 Buick Roadmaster Estate Wagon
We have been looking for a while now to find a class III hitch for our 96 Buick Roadmaster. Would you know a class III hitch that fits? Or can be made to fit? It needs to pull a 1972 Airstream Argosy of -empty- about 3500 pounds. | We have a...
How Tight Should Compression Fitting # D13032 Be when Installing a Transmission Cooler
Hi guys! With regards to the compression fitting installation, can you please tell me how tight I should tighten the crush nut and the barb fitting. Do I need to go all the way until no thread is left? | Generally, you will tighten the fittings...
Trailer Wiring and Brake Controller Recommendations for a 1996 Buick Roadmaster Estate Wagon
I am installing a traler hitch on the above wagon- questions are 1 wireless vs wired controller cost is not a total issue 2 is there an installation Kit for that wagon I suspect it would be the same as a Suburban 3 is the car pre-wired I...
What is the Weight of Hollywood Racks Sport Rider SE2 2-Bike Platform Rack # HR1450Z
How much does this bike rack weigh? We plan to use it with two different vehicles and ease of moving from one to another is important. We had the Thule Apex and it weighed 41#s which was OK. Does this weigh about the same? | The Hollywood...
How to Tell if the Yakima SkyBox NX 16 Will Fit a 2006 Toyota RAV4
Will this box fit my 2006 Rav-4? It has a factory rack and cross bars. | Here is how you can determine if the Yakima SkyBox NX 16 Rooftop Cargo Box, # Y95AV, will fit your 2006 Toyota RAV4 and allow your rear hatch to open. Measure the crossbar...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Filter Your Search
Contact and Help