Bolt Sizes for a 2006 Toyota Matrix Trailer Hitch 24812
Do you know the size of bolts for 06 toyota matrix tow hitch? | All of the hitches available to fit your vehicle are Class I hitches. The most common hitch, 24812, was one which fits with or without the rear fascia. The bolts for that hitch...
Curt Hitch for 2017 Buick Envision that Allows Reinstall of Lower Rear Bumper Cover
After instalation of this hitch will the bumper hitch/cover go back in place using the 2 screws removed during he installation of the hitch. I dont mind having to replace the two screws and cover when not using the hitch as we dont want to see...
2008 Toyota Matrix Trailer Hitch and Bike Rack Recommendation
I was hoping to find a 2inch tow hitch for my 2008 Toyota Matrix base model. My bike rack is 2x 2inch and I was hoping not to use an adapter. All the hitches that I have found thus far have 11/4inch receivers. | Only the larger vehicles like...
Where on Roof of 2022 Buick Envision Does Inno Roof Rack Mount
On my 2022 Buick Envision, if I had the flush rail Inno rack crossbars, where should I mount the front bar relative to the front and rear door pillar? How far back should the rear bar be placed for most carrying situations - like kayaks, for...
Recommended Flat Towing Set Up for a 2019 Buick Envision
Is there a company that sells and installs your products near me? Flat towing a 2019 Buick Envision. 91766, ty. | Hey Ralph. We have a large network of installers that I would be happy to get you connected to. If you go to the product page of...
Torque Rating for Hardware of Curt Hitch C94NR
What is the torque specs on the 4 carriage bolts? | Hey Skip, the install of the Curt hitch # C94NR hardware needs to be torqued to 59 ft lbs. Do you have a torque wrench? |
Hitch Pin Size for 2018 Buick Envision Curt Hitch
Hello, what size hitch pin does this receiver use? | Hey Jeff, thanks for reaching out! The Curt Trailer Hitch Receiver # C13292 works with a 5/8" pin like the part # PC3. What do you plan on using the hitch for on your 2018 Buick Envision? |
Recommended Trailer Hitch Receiver For A 2024 Buick Envision
Want to confirm this will fit on the new 2024 Buick Envision. The video is a 2023. Thanks | Hey Michele, Yes, there were no design changes to the 2024 models so the Curt Trailer Hitch Receiver # C94NR would still be a compatible fit for your...
Parts Needed to Flat Tow a 2020 Buick Envision
Just read your article on flat towing the 2018 Buick Envision. Could you modify that to reflect the needs for a 2020 Envision, please? I think Id like to start with the Roadmaster 523196-4 baseplate. Will that unit accept other than Roadmaster...
What Do I Need To Flat Tow A 2017 Buick Envision
Need to equip my 2017 Buick Envision for flat towing. Can the Roadmaster fuse master work on this vehicle? Also please list all parts needed to hook up behind 2018 Leisure Travel Van. I am thinking that the Invisi Brake would be the way to go....
Troubleshooting Roadmaster NightHawk Tow Bar Arms That Won't Lock Into Place
We were told the levers that lift up to allow the tow bars to slide in or out, were supposed to snap into locked position when tow vehicle begins to tow the car. For our tow bar, it is hit or miss for both or one of them to lock into place....
Availability of a 2 Trailer Hitch for a 2004 Toyota Matrix to Carry a Bike Rack
hoping this exists. Mostly need for a bike rack, would rather not use a converter. thanks | You are definitely on the right track when it comes to not wanting to use an adapter for your bike rack. The only trailer hitches that are a confirmed...
What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
what is the bolt size , 12mm 1.25,1.50,1.75? thanks | If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld...
Does Curt Hitch # C94NR Fit 2024 Buick Envision
My Buick 2024 envision well the C94NR fit | Hey Bruce, yes the Curt hitch part # C94NR does fit your 2024 Buick Envision. |
Why Is The Curt Trailer Hitch Receiver # C94NR Labeled As Class III
Why is this hitch C94NR called a class III yet is only rated at 2000Lbs. Isnt Class III up to 3500lbs? | Hey Roger, I understand the confusion about the class designation for the Curt # C94NR. Since it has a 2" receiver tube and this is only...
2020 Buick Envision Recommended Parts for Light Trailer Towing
I need to do some light towing with my 2020 Buick Envision. What do you recommend I use? | I'd be more than happy to make some recommendations for towing with your 2020 Buick Envision! Here is a list of parts for you: - etrailer Trailer Hitch...
Can I Use a Bike Rack with 4 Bikes Weighing 183 Pounds with a Hitch Rated for 200 Pounds?
2024 Buick Envision Avenir Will the C94NR work with a Thule bike rack 35 lbs and four 37 lb bikes ? This is 183 lbs total. My concern is the 200 lb tongue weight maximum. Thanks | Hello Alan, I definitely understand your concern. The Curt Trailer...
Easy to Install Trailer Wiring for 2020 Buick Envision
Does this come with a wiring harness that is specifically designed for the 2020 Buick envision so that you dont have to cut any wires to install it, and how easy it is to install the wiring harness? | We do have easy to install trailer wiring...
Are Load Resistors Needed for LED Backup and Brake/Tail Lights
Im thinking of changing to LED lights. 2010 Toyota Matrix XR . Do you need Load Resistors for backup and brake/tail light LEDs. What would be the cost from you for LEDs. Canadian Vehicle | When changing from incandescent or halogen type bulbs...
Thule Spare Me Rack on 2010 Rav4 with Back Up Camera
I see that I cannot use a Thule Spare Me 2 bike carrier if I have a backup camera on my 2010 Rav4. Why? What are the alternatives? I can live without the camera for a short term. Thanks! | I spoke with the folks at Thule regarding the spare...
Parts Needed To Flat Tow 2017 Buick Envision
Flat towing a 2017 Buick Envision behind 2018 Coachmen Mirada 35KB. What Swaypro tow bar and accessories do I need? | The Blue Ox SwayPro, such as the # BXW1000, is a product line of weight distribution hitches with sway control systems. This...
What Vehicles Does The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector TK74VR Fit?
Some time ago I asked about my 2023 Buick Envision Essence. At that time you had a splice harness for Envisions that didn’t have the tow package. Is this new harness usable for all envisions in that year range? | Hello Frank, welcome back!...
Is There Any Way To Quiet The Relays On The Curt 4-Way # C56364 For a 2017 Buick Envision?
2017 Buick Envision Essence Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector Item C56364 Are there any silent relays for the Curt wiring harness? They are noticeably loud inside the vehicle....
Will The Curt Trailer Hitch Receiver # C94NR Fit A 2025 Buick Envision Avenir
Just purchased a 2025 Buick Envision Avenir No problem installing it on a 2025? | Hey Doug, The Curt Trailer Hitch Receiver # C94NR is confirmed to fit all sub models of the 2025 Buick Envision so you should have no problem installing it on...
Filter Your Search
Contact and Help