Class 3 Trailer Hitch For A 1994 Buick Roadmaster Estate Wagon
Hi, Do you make a class III hitch for 5K pound capacity for a 1994 Buick Roadmaster Estate Wagon ? | Hi Daniel, nice car! We do have an option that may fit your 94 Buick Roadmaster Estate Wagon, but it doesn't look like there is a custom...
Recommended Equipment for Towing a Trailer with a 1993 Buick Roadmaster
I tow a 6x12 single axle trailer with my Silverado which has a 2 inch receiver class III hitch. I need a hitch for my 93 Roadmaster sedan Limited that has a 2 inch receiver but I do not see any Class III I do not need the load carrying ability...
Crossbar Kit Recommendation to Fit with Retrax XR Tonneau Cover on a 2022 Ford Raptor
Hi I have a truck 2022 Ford Raptor with retrax XR tonneau cover with rails compatible with T-slot accessories. Can you please recommend cross bars that would work with the rails on the retrax xr tonneau cover? Thank you | Hey Bora, thanks...
Availability of Class III Hitch for 1996 Buick Roadmaster Estate Station Wagon
I have a 1996 Buick Estate Wagon. Looking for a class 3 receiver. Has to fit the wagon not sedan......thanks | We do offer a Class II hitch for the 1996 Buick Roadmaster Estate Wagon with a respectable 3500 lb towing/350 lb tongue weight capacity,...
Is There a Class III 2" Trailer Hitch Receiver Available For a 1995 Buick Roadmaster?
Do you sell class 3 hitch for 95 buick roadmaster with tow package? | The Curt Trailer Hitch Receiver # C12009 class II receiver is our only custom fit receiver for your 1995 Buick Roadmaster. There are a couple ways you can get to a 2" opening...
Does a Trailer Hitch Mounted Cargo Carrier Require a Light Kit on a 1995 Buick Roadmaster Wagon
Do I need to have lights wired to my car 95 Buick Roadmaster wagon if the cargo carrier isnt wide enough to obscure the tail lights? | If the cargo carrier and the cargo loaded on it do not obscure the vehicle tail lights, you do not have to...
Recommended Trailer Hitch for 1994 Buick Roadmaster Estate Wagon
I have a 1994 Buick Road master wagon and have been searching for a class 3 trailer hitch without success. Im interested in possibly purchasing your Draw tite class 3 item#75676 which I noticed stated it May Not fit my wagon. My wagon is built...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Differences Between Class II and Class III Trailer Hitches
What is the exact difference between a class 2 and class 3 hitch for a 1996 Buick Roadmaster Estate Wagon? Is it strength of materials or design or both? Can I purchase fabrication drawings and specification specifics from you? Any help...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Can Hopkins Trailer Wiring Kit Cause 1996 Buick Roadmaster Fuel Pump to Stop Working
I used this harness and on my 96 Buick Roadmaster Wagon and followed the instruction where to plug into which side and also attached the white ground. After install this causes my fuel pump to no longer work until I unplug it and plug the tail...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Fit of Phoenix Faucets PF231321 Hybrid RV Kitchen Faucet on Roadtrek Class B Motorhome
will the Phoenix Faucets Hybrid RV Kitchen Faucet - Single Lever Handle - Chrome Item # PF231321 work in a 2006 Roadtrek 190 Popular. Would you recommend something different? thank you | The Phoenix Faucets # PF231321 would be a good choice...
Wiring a Brake Controller for a 2004 Chevrolet Express Van
I am looking for a 7 pin wiring harness for a 2004 Chevy Express van. I cannot find it anywhere. Do I need to order item 118392 4 pin and also the 7 pin adapter? The 7 pin adapter has a 4 pin as well as the four? Those extra wires are used...
Factory Luggage Rack Capacity Buick 1996 Roadmaster Station Wagon
How much weight can the roof rack or carrier on Buick 96 station wagon Roadmaster hold with out damaging the roof? | I was lucky enough to be able to find a .pdf copy of the 1996 Buick Roadmaster Station Wagon owner's manual online. Buick states...
How Tight Should Compression Fitting # D13032 Be when Installing a Transmission Cooler
Hi guys! With regards to the compression fitting installation, can you please tell me how tight I should tighten the crush nut and the barb fitting. Do I need to go all the way until no thread is left? | Generally, you will tighten the fittings...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Trailer Hitch Recommendation for a 1994 Buick Roadmaster Estate Wagon
We have been looking for a while now to find a class III hitch for our 96 Buick Roadmaster. Would you know a class III hitch that fits? Or can be made to fit? It needs to pull a 1972 Airstream Argosy of -empty- about 3500 pounds. | We have a...
Trailer Wiring and Brake Controller Recommendations for a 1996 Buick Roadmaster Estate Wagon
I am installing a traler hitch on the above wagon- questions are 1 wireless vs wired controller cost is not a total issue 2 is there an installation Kit for that wagon I suspect it would be the same as a Suburban 3 is the car pre-wired I...
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
What Gauge Wire is the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter # HM47180?
What gauge wire is used in the pigtail with #HM47180 | I went out to the warehouse and pulled the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter item # HM47180 off the shelf. The brake controller wire is 16 gauge the other...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Filter Your Search
Contact and Help