bing tracking image

Rabbit  x   >   RVR  x   >   Ranger 1000XP  x   >   iX  x   >  

Result:

Do you Have a Wheel Holder Replacement for Thule Upride Bike Rack?

Will this part fit the Thule upride too? | Hello John, No, the # TH73WH is designed for the Outride. For the Thule Upride you want the Replacement Rear Wheel Holder Assembly for Thule # TH74VW. I included a review video for the product to check...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Dometic FreshJet 3 15,000 Btu RV Air Conditioner Noise Level and Quiet Operation Explained

What is the noise range in decibels for this AC? | Hi Sue, great question! The Dometic FreshJet 3 RV Air Conditioner part # DMC94JF operates at approximately 58.5 decibels under normal running conditions, which is considered very quiet for...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

How To Get 7-way Connector For Stealth Hitch On 2023 BMW iX50

Hello, I need to purchase the wiring only for my Stealth Hitch. In the installation instructions it shows as “Universal 7 way 2120-7001” for my 2023 BMW iX50. Also, for my stealth hitch ball arm…any suggestions to increase the height? Please...

Does etrailer Have Installation Video of Curt Hitch on 2025 BMW iX

2025 BMW I X ELECTRIC IS T5HERE A VIDEO ON INSTALLATION | Hi Daryll; at this time we do not have any hitch installation videos for the 2025 BMW iX. This is true for the Curt # C87NR as well as the other available hitches. Our installation...

Replacement Hardware for Curt Hitch 13329

Curt c13329 hardware available? | Hello Atila; we do have replacement hardware for the Curt # C13329. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. You will need to enter "C13329" in the Hitch Item Number field then...

Best Stealth Hitch For 2023 BMW X1 For A Bike Rack

Hi! I am thinking about adding a stealth hitch to my 2023 BMW x1 for a bike rack. I would like to still use my foot sensor to open the trunk. Can I buy and install this with you? For how much? Thanks! | Hello Candace, thanks for reaching out....

Will Konig K-Summit Tire Chains Fit 2025 BMW iX xDrive50

I just bought a 2025 BMW iX xDrive50. It came with 20” summer tires. I live on a 15 grade on the side of a mountain in AK. I hope to get some 255/50R21 Nokian Hakapolita 10 Studded tires on 21” wheels. I’d like to also have a set of chains. The...

What Is The Distance From Pin Hole To The End Of The Hitch On The DT58KV?

What is the distance between the pin hole and the end of the hitch on the draw tight hitch? I need a minimum of 2” for my Thule bike rack. | Hey Robert, I ran out to our warehouse to get that measurement for you. From the pin holt to the end...

Recommended Fine Link Tire Chains For 245/50-19 Tires on 2022 BMW

Hello. I have a 2022 BMW 130i XDrive. I live in Oregon where snow chains are required in certain areas. The Owners manual requires fine link snow chains. My tire size if 245/50-19. Can you recommend chains that meet BMWs requirements? Thank...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Will the Liftgate Function Work w/ the Curt Rack Receiver item # C87NR on a 2024 BMW iX 50i?

Will the kick activated tailgate opening still function with this hitch on my 2024 BMW iX 50i? | Yes, it will. I checked with Curt and they said the Curt Rack Receiver item # C87NR will not block the liftgate function. Typically what happens...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch

Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...

Filter Your Search