Class 3 Trailer Hitch For A 1994 Buick Roadmaster Estate Wagon
Hi, Do you make a class III hitch for 5K pound capacity for a 1994 Buick Roadmaster Estate Wagon ? | Hi Daniel, nice car! We do have an option that may fit your 94 Buick Roadmaster Estate Wagon, but it doesn't look like there is a custom...
Recommended Equipment for Towing a Trailer with a 1993 Buick Roadmaster
I tow a 6x12 single axle trailer with my Silverado which has a 2 inch receiver class III hitch. I need a hitch for my 93 Roadmaster sedan Limited that has a 2 inch receiver but I do not see any Class III I do not need the load carrying ability...
Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Availability of Class III Hitch for 1996 Buick Roadmaster Estate Station Wagon
I have a 1996 Buick Estate Wagon. Looking for a class 3 receiver. Has to fit the wagon not sedan......thanks | We do offer a Class II hitch for the 1996 Buick Roadmaster Estate Wagon with a respectable 3500 lb towing/350 lb tongue weight capacity,...
Is There a Class III 2" Trailer Hitch Receiver Available For a 1995 Buick Roadmaster?
Do you sell class 3 hitch for 95 buick roadmaster with tow package? | The Curt Trailer Hitch Receiver # C12009 class II receiver is our only custom fit receiver for your 1995 Buick Roadmaster. There are a couple ways you can get to a 2" opening...
Recommended Trailer Hitch for 1994 Buick Roadmaster Estate Wagon
I have a 1994 Buick Road master wagon and have been searching for a class 3 trailer hitch without success. Im interested in possibly purchasing your Draw tite class 3 item#75676 which I noticed stated it May Not fit my wagon. My wagon is built...
Does a Trailer Hitch Mounted Cargo Carrier Require a Light Kit on a 1995 Buick Roadmaster Wagon
Do I need to have lights wired to my car 95 Buick Roadmaster wagon if the cargo carrier isnt wide enough to obscure the tail lights? | If the cargo carrier and the cargo loaded on it do not obscure the vehicle tail lights, you do not have to...
Differences Between Class II and Class III Trailer Hitches
What is the exact difference between a class 2 and class 3 hitch for a 1996 Buick Roadmaster Estate Wagon? Is it strength of materials or design or both? Can I purchase fabrication drawings and specification specifics from you? Any help...
Can Hopkins Trailer Wiring Kit Cause 1996 Buick Roadmaster Fuel Pump to Stop Working
I used this harness and on my 96 Buick Roadmaster Wagon and followed the instruction where to plug into which side and also attached the white ground. After install this causes my fuel pump to no longer work until I unplug it and plug the tail...
Baby Moon Cover for Dexstar Conventional Trailer Wheel AM20514
Do you sale babymoon or any other hub caps that fit your 15 6 lug conventional dexter wheels. | Yes we have the baby moon covers # AM981306 that fits the 15 inch conventional trailer wheels part # AM20514 that you referenced. |
Factory Luggage Rack Capacity Buick 1996 Roadmaster Station Wagon
How much weight can the roof rack or carrier on Buick 96 station wagon Roadmaster hold with out damaging the roof? | I was lucky enough to be able to find a .pdf copy of the 1996 Buick Roadmaster Station Wagon owner's manual online. Buick states...
Trailer Hitch Recommendation for a 1994 Buick Roadmaster Estate Wagon
We have been looking for a while now to find a class III hitch for our 96 Buick Roadmaster. Would you know a class III hitch that fits? Or can be made to fit? It needs to pull a 1972 Airstream Argosy of -empty- about 3500 pounds. | We have a...
How Tight Should Compression Fitting # D13032 Be when Installing a Transmission Cooler
Hi guys! With regards to the compression fitting installation, can you please tell me how tight I should tighten the crush nut and the barb fitting. Do I need to go all the way until no thread is left? | Generally, you will tighten the fittings...
What Gauge Wire is the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter # HM47180?
What gauge wire is used in the pigtail with #HM47180 | I went out to the warehouse and pulled the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter item # HM47180 off the shelf. The brake controller wire is 16 gauge the other...
Trailer Wiring and Brake Controller Recommendations for a 1996 Buick Roadmaster Estate Wagon
I am installing a traler hitch on the above wagon- questions are 1 wireless vs wired controller cost is not a total issue 2 is there an installation Kit for that wagon I suspect it would be the same as a Suburban 3 is the car pre-wired I...
Recommended Trailer Hitch Receiver For A 1974 Ford Ranchero
Hi, Im interested in a tow hitch for a 1974 Ford Ranchero. Can you tell me if you make one and what the product number is? Many thanks, Lock | Unfortunately we do not have a trailer hitch confirmed to fit a 1974 Ford Ranchero so you would have...
Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires
I have a 2012 RZR XP. It has 27-9R-14 in the front and 27-11R-14 in rear for tires. I have put the E-TRACK system on my trailer. I want to know if there is a tire strap that would work. | For your tires, I recommend going with the Erickson Wheel...
Replacement Exterior Folding Handrail for 2015 Grand Design 385TH Toy Hauler
we have a 2015 grand design momentum 385th toy hauler. will this fit where the one that is on there now looking at just taking it off and replaceing it with yours? it looks the same as ours, yours is just larger. It is mounted on the left...
Winch Mount Recommendation for 2013 Polaris RZR-4 XP 900
What winch mount will work for my 2013 rzr xp 4 900? | We have the Bulldog Winch Mount part # BDW15167 which is a confirmed fit for your 2013 Polaris RXR-4 XP 900. You could use it with the part # BDW15001. |
What is Required to Install Draw-Tite Trailer Hitch # C12009 for the 1996 Buick Roadmaster
Hi, Is the installation of this tow hitch pretty straight forward. Meaning do I have to do anything other that bolt to the car, like lower the exhaust? Thank you, | The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # C12009...
Recommended Brake Controller and Parts Needed for a 1996 Buick Roadmaster
Hello, I am looking at the Tekonsha controller. What will I need to wire this to my 96 Buick Roadmaster? Thanks for the advice. | I highly recommend going with the Tekonsha P3 # 90195 because its one of the most popular and highest rated brake...
How To Order Replacement Trailer Hitch Installation Hardware For 1994 Buick Roadmaster Sedan
Im looking for a trailer hitch mounting hardware kit. I have a 36364 parts number for the kit. Its for a 94-96 Buick Roadmaster. Hitch number 33003 Reese. Draw-Tite 75146 Any info will be appreciated. | For a 1994 Buick Roadmaster we offer...
2 inch Square Receiver Adapter for 1993 Buick Roadmaster
I am trying to adapt a flattend rectangle style class 1 hitch receiver to a 2inch square receiver. Is there anything that could be used to fit that purpose? | All of the hitch receivers and receiver accessories that we offer are square, not...
Winch Mount for Superwinch 3000 LT for 2011 Polaris RZR 900 XP
Will the winch mount #2202914 and Superwinch LT 3000 SW1130220 fit a 2011 Polaris Ranger RZR 900 XP without any modifications to the RZR? The list of models does not include the XP version. | For your 2011 Polaris Ranger RZR 900 XP the correct...
Filter Your Search
Contact and Help