RZ x > Rondo x > RV x > Nitro x >

Result:

Trailer Hitch that Fits 2026 Lexus RZ350e Electric

I’m looking for a 2 inch receiver that will fit my Lexus RZ350e 2026. I will be using it for a bike rack not for towing. I found the one that fits the 2026 Lexus RZ350 but it does not specify if it also works with the electric model. Can you...

Does the Curt C58VV Hitch Fit a 2026 Lexus RZ450e AWD and Affect the Hands Free Liftgate?

2026 Lexus RZ450e AWD with 2nd motor driving rear wheels. Does this Curt receiver fit? And does it interfere with the kick sensor to open the rear hatch? | Hi Stephen, Yes, the Curt Rack Receiver, Part # C58VV, is confirmed by Curt to fit...

Parts Needed to Flat Tow 2010 Dodge Nitro

I have a 2010 Dodge Nitro. SE 4x4, and I need to get a tow bar bracket. Thatll work so I can use a quick connect toe bar. I dont know what to purchase where to purchase or how to hook up the wires. so I can tow behind motothome. Do i need to...

Will the Thule Roof Mounted Cargo Basket # TH859XT fit a 2010 Dodge Nitro

Help..Looking on line at the Thule roof mounted cargo basket. Will it fit on 2010 Dodge Nitro??? I will be carrying a 12 ft kayak and 10fooot 6inch kayak. Ive had failed attempts of roof carriers. Dealer wants a arm and a leg. Thank you....

What Gauge Wire Runs To The Battery On The Curt 4-Way # C56334?

What size wire runs to battery? | The Curt T-Connector Vehicle Wiring Harness # C56334 is going to come with a 12 gauge wire to run from the converter box to the battery. |

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

How Do You Attach The Wiring Socket To The Front Of The Blue Ox Base Plate On a 2007 Dodge Nitro?

I just received my base plate. Circled In the picture, Ive seen the 6 round hole wire mounted here. I dont see threads in the hole. What do in use to mount or is this not a mount? Thanks | The Blue Ox 6-Pole, Round Pin, Trailer Wiring Socket...

2012 Dodge Nitro Trailer Hitch and Bike Rack Recommendations

I need a hitch and bike rack for my 2012 Dodge Nitro. What do you recommend? | I recommend using the etrailer Trailer Hitch Receiver # e83KR for carrying a bike rack on your 2012 Dodge Nitro because it has a matte black finish to help match...

Can Jeep Liberty Hitch Fit 2011 Dodge Nitro

Hi I have a 2011 dodge nitro and I need a hitch Ive been looking and I see that a jeep liberty hitch has a higher rating of 7500 lbs weight distribution to the nitro hitch of 6000. Now I will generally be towing light but I am a race car mechanic...

Trailer Hitch Recommendation for 2007 Dodge Nitro

Which is better for my 2007 Dodge Nitro, easy installation,and pull trailer with mower? | Both the Curt # 13334 and the etrailer hitch # e83KR are very easy to install and are virtually identical hitches except for the finish. The Curt # 13334...

Leaf Spring Suspension Recommendation for 42 x 48 inch Trailer

Second one Ive owned and the suspension with the slipper springs is horrible and bounces all over. Before I put this one together Id like to see whats needed to change the slipper to a shackle type with double eye springs to try and help smooth...

What Size Bolts are Used for Curt Trailer Hitch Receiver for 2008 Dodge Nitro

What length and size bolt is needed for hitch assembly for a 08 Dodge Nitro SLT frame? | According to the linked installation instructions the bolts are M12-1.75 x 45mm, although these do come with the Curt Trailer Hitch Receiver # 13334. If...

Weight Distribution Recommendation for a 2010 Dodge Nitro and Max Towing Capacity for Dodge Nitro

I m buying a 2005 Jay flight camper I think it weights around 7600. Hopefully my 2010 Dodge nitro 3.7 v6 4x4 can pull this. However I need to know what kinda hitch and sway bar that I would need. Thanks for any advice! | I checked the owner's...

Trailer Hitch Recommendation for a 2007 Kia Rondo

I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...

Wiring a Brake Controller on a 2007 Dodge Nitro

I BOUGHT THE PRODIGY BRAKE CONTROLLER. i HAVE A 2007 DODGE NITRO LX AND NEED A HARNESS THAT FITS. CAN YOU HELP? | The Tekonsha Wire Replacement, part # 3020, for Dodge Vehicles is for vehicles that have the factory 7-way trailer connection installed...

Trailer Hitch and Wiring Recommendations for a 2007 Dodge Nitro SXT

How do I know if it is a weight distribution installation or the other? Specs: Receiver opening: 2inch x 2 Rating: Class III Maximum gross trailer weight: 3,500 lbs Maximum GTW when used with weight distribution: 5,000 lbs Maximum tongue weight:...

Replacement E009 Key For Mopar OEM Roof Rack on 2009 Dodge Nitro

I need a replacement key for my dodge nitro factory roof racks E009. Do you have something to fit? | Thule made those racks for Mopar, so the Thule # THKEYN009 would be the correct replacement. The older lock cores were just a little shallower...

Does the 2007 Dodge Nitro Provide a Brake Controller Port Underneath the Dash

07 Dodge Nitro Is there factory wiring under the dash to plug into or do I have to run all the wires for a brake control? Thanks & Merry Christmas | The Dodge Nitro does not have a tow package or an under-dash brake controller port. You will...

What are the Power and MPG Increases for the MagnaFlow Cat-Back Exhaust on a 2010 Dodge Nitro

I have the 4.0with te towin package. Pull a 18foot camper. Have been lookingfor anafte market exhaust to improve power alittle. Info youhave her is impressive. If it increaes it great. How does it affect Gas MPG?Any info you can give my on Power...

Hitch Bolts Do Not Want to Thread Into Weld Nuts on 2008 Dodge Nitro

Morning, I purchased the trailer hitch and electrical harness for a Dodge Nitro 2008. The bolts will not thread into the frame nut. Sorry, do not have the invoice handy. Please advise. | It sounds like the weld nuts need to be cleaned. We recommend...