Does Curt Trailer Hitch for 2010 Nissan Cube Require Stabilizing Strap for Bike Rack
Hello, Im looking at the Curt hitch for my 2010 Nissan cube. The Curt info says it requires a stabilizing strap for bike racks. Is that correct? My Cube has a rear spoiler that prevents an attachment point for a stabilizing strap, so the...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Best Bike Rack that Allows For Easy Loading Of the Bikes and Into The Hitch
I am 81 years old. I have a Sun bike which I love to ride but I’m tired of riding just the streets in my small town and want to drive to other locations to ride plus some bike trails. I am not very strong so need a rack I can put on the car...
Will Saris Solo Bike Carrier Fit 2012 Nissan Cube Carrying 2015 Surly Pugsley
I have 2015 Surly Pugsley that weighs 33lbs13oz going on a 2012 Nissan Cube.Will the Saris Solo work for me? | Hi David; the Saris Solo Bike Carrier # SA102 is a confirmed fit for your 2012 Nissan Cube. Since your 2015 Surly Pugsley weighs less...
Installation of Yakima HangOut 2 for 2012 Nissan Cube
On a Yakima Hangout 2 how far apart should the arms that touch the care be on a 2012 Nissan Cube and where do you measure from | Hi David; Yakima lists the HangOut 2 # Y02637 measurement as 16-7/8" for the 2012 Nissan Cube. You measure from...
Can a 5th Wheel Trailer with Sidewinder by Towed with No Wedge or Lock Out Bolts Installed
I have been working with Reese on questions about the Airborne Sidewinder pin box. Hopefully your tech department can help. we had this pinbox installed at the Northwood factory Arctic Fox and it was pulled 1300 miles to us. Its the first one...
Curt Hitch C11202 for a 2010 Nissan Cube to Carry a Bike Rack
I need a hitch. I’m planning to carry A electric recumbent trike.. I converted my old steel carrier Into a trike capable carrier. 1. Which option is easier to install 2. The carrier plus the trike will weight between 60-100lbs 3. Will...
Width of Channel on the Curt Channel Style Adjustable Ballmount C45900
Can you.let me know the width of the channel on the curt c45900 Regards | The interior channel width of the Curt adjustable ball mount part # C45900 that you referenced is 3 inches. |
Trailer Hitch Installation on a 2009 Nissan Cube with Ground Effects
My model has the ground effects kit like the chrome model. Will this fit? Also, bought a 3 bike rack to slide into receiver. Do I need the pin to take it in and out when not in use? It will do 2inch and 1 1/4. | We do have trailer hitch options...
SumoSprings Fit for Tiffin Allegro Open Road on 2008 Freightliner FRED Chassis
I have a Tiffin Allegro Open Road BA32 FRED. It has a Freightliner 2008 MC Front Engine Motor Chassis. Can U Verify that this RV can use the SSF-501-40 Sumo spring and the SSR-502-54 | I checked with SuperSprings (the manufacturer of SumoSprings)...
Overall Dimensions of the 90 Degree Elbow Part of Lippert Waste Master RV Sewer Hose # LC359724
Hello, can you tell me the o/a dimensions of Lippert Components waste master 90 degree elbow fitting including integrated handle and shut-off lever? Im concerned about the thickness of the elbow fitting under my service panel in the compartment....
Can a Derale Transmission Cooler be Used with an Allison 2200MH Transmission on a Motorhome
I have a 2007 Fleetwood Allegro FRED motorhome with an Allison 2200MH transmission. It appears to have 12AN fittings which means the hose inner diameter is probably .69” or close to it. If I add a transmission cooler and the hose or cooler...
Availability Of SumoSprings Helper Springs For 2008 Tiffin Built On Freightliner FRED Chassis
do you have helper springs to fit this frame 26000 freightliner , we have a 08 tiffin with the front engine and it seems to sway a lot even with new factory shocks . what do you recommend . thanks | There are helper spring options for your 2008...
How Does Breakaway Function Work With Wireless Brake Controller
If using wireless trailer brakes, how does this sytem handle breakaway function. Do you not have to have the capability of breaks holding for 45 min in case of a disconnection? | When using a wireless brake controller like the Curt Echo Wireless...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
2006 Freightliner FRED RV Chassis Replacement Trailer Hitch Options
I need a hitch for a 2006 Freightliner FRED RV chassis? The one on the chassis now is a Curt 81201 which is discontinued. | For your application you'll need to use one of our universal RV trailer hitches like the Curt Hitch # C13704. This fits...
Could Scissor Jack be Used on Motorhome
I have a Class A 38’ motor home. Has hydraulic leveling jacks. One is broke and another one failing very soon it appears. Had an idea to just keep all of them in up position and use scissor jacks to level and stable rv. Cheaper then repairing...
Identifying Wiring on 2010 Nissan Cube for Installation of Curt Tail Light Converter # C56175
Im trying to find out what color wires on my 2010 nissan cube matches the colors on the hitch hookup I bought. The colors on car are differant. Left turn, right turn stop. Thank you | Often vehicle wiring colors are consistent to allow color-for-color...
Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails
Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...
Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR
I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...
Trailer Hitch and Wiring Recommendation for 2022 Mitsubishi RVR
Hi there I just bought a 2022 Mitsubishi RVR and wanted some clarification on what hitch and wiring I need? Could you send links? Also there’s no videos for install? Thanks | For your 2022 Mitsubishi RVR the e63AR Hitch part # e63AR is the...
Dimensions of the Curt Spyder Gooseneck Trailer Hitch # 16085
Where can I locate the spec.measerment on this product? | Curt does not usually provide their product drawings or spec diagrams for their products, but, if you were looking for a specific dimension on the Curt Spyder Gooseneck Trailer Hitch,...
Trailer Hitch and Wiring for a 2011 Nissan Cube
Hi I just received my trailer- hitch and I have a few questions. Will I be able to tow a 200 lbs. boat and a 200 lbs. trailer with it. Also why am I cutting holes in the frame is it just for wiring. Please let me know. I have a 2011 Nissan...
Filter Your Search
Contact and Help