Hitch And Bike Rack For Carrying Two Lectric XP4 Ebikes On A 2016 Chrysler 200
I have recently purchased 2 Lectric XP4. I need to add a class 1 receiver to a Chrysler 200 4 cylinder 800 total weight for the car. The bikes are 71 pounds with battery. What are my options for an ebike rack? Thanks in advance. | Hi Gregg! We...
Trailer Hitch Recommendation for a 2012 Chrysler 200 Convertible
The hitch Im looking at is for the Chrysler 200. I have the 200 convertible . Are they the same ? | There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit....
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Availability of Tire Chains for 17.5L-24 Tractor Tires for Kubota MX5100
hi do you have chains to fit my 17.5L-24 tractor tires? not sure how to use your search tool for this application - kubota MX5100 4wd thanks | Hi Glenn; we do have tire chains that for your 17.5L-25 tires on your Kubota MX5100. The search...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Trailer Hitch and Wiring for a 2012 Chrysler 200
Can I use this hitch on my Chrysler 200 to tow a small pop up camper? | Draw-Tite trailer hitch # 24871 for the 2012 Chrysler 200 is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Provided that the trailer is within...
Flat Tow Wiring Harness For A 2013 Chrysler 200
I have a 2013 Chrysler 200 which we tow on a Kar kaddy I was looking for a connector that I can connect to the front of the car wiring so the tail lights on the car would also show turn and stop lights Do you have something like that? | Yes...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
Recommended Hitch for a 2015 Chrysler 200
hello good morning I am very interested in buying a hitch trailer for my 2015 Chrysler 200c. Thank you | To add a hitch to your 2015 Chrysler 200, I recommend the Curt item # C11403. This hitch is custom fit and bolts to your Chrysler with included...
Replacement Bike Rack Cradle For A Rhode Gear Bike Rack
Do you carry any replacement cradles that will fit a 7/8inch diameter tube as I have on an older Rhode Gear 2-bike Hitch Shuttle rack? Thanks! | When it comes to the replacement cradles for your Rhode Gear 2 Bike Rack The Replacement Cradle...
How To Choose Correct Bearing Buddy for Tractor Supply Small Utility Trailer
I measured the hub and ordered the Bearing Buddy that measured 1.968. That is a little bit too small. Is Bearing Buddy that measures 1.980 the best option for this hub? | The correct Bearing Buddy Bearing Protector like part # BB1980A will be...
Recommended Bike Rack and Trailer Hitch Receiver 2012 Chrysler 200 Convertible
installation of a hitch to carry two bikes on a 2012 Chrysler 200 convertible hard top can I have a hitch installed on this car I already have the support plattform for two bikes thank you | We have two trailer hitch receivers for your 2012...
Where Does Kat's Engine Block Heater Install on 2012 Chrysler 200 3.6 Liter Install
Where is the location to install a block heater on a 2013 chrysler 200 3.6 L. | Your 2013 Chrysler 200 has the transverse Pentastar 3.6 liter which Kat's recommends their heater part # KH11814. The cartridge location you need to use is right...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Recommended Roof Rack And Kayak Carrier For 2012 Chrysler 200
My son has a 2012 chrysler 200 with a regular roof. He has a fishing kayak that he would like to transport with his vehicle. Would like to know if they make carriers for his vehichle and if so what is the best system? Thank you for your help....
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Measurements on the Curt Trailer Hitch Class II Receiver
I have some questions about the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 Item # C12064 I need to know the measurement between the frame rails and the height of the frame rails. I want to see if I can custom adapt it to a...
Troubleshooting Carriage Bolt that Keeps Turning When Installing Draw Tite 24919
I just installed a Draw Tite hitch on my 2014 Chrysler 200 with twin exhaust pipes, when I tried to tighten one of the bolts the bolt just kept turning with the nut once it was tightened. So I could not torque it. BTW Its much harder to put...
Recommended Trailer Hitch Cargo Carrier For Pop-Up Tent
Can you recommend a product that I can attached a hitch receiver for my 2015 Chrysler 200 to use a small pop up tent. | There is not a hitch mounting application for a tent if that is what you are referring to. We have some tents that attach...
Tire Chains for an ATV with 25x10x12 Tires
Are cable chains available for Kubota SUV... 25X10.00-12NHS | While we do not have cable chains for ATV 25x10x12 tires, we do have low-carbon steel V-bar chains for them. They are the Titan Chain ATV Snow Tire Chains - Ladder Pattern, part...
Recommended Trailer Hitch Receiver for 2011 Kia Rondo
I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...
Filter Your Search
Contact and Help