Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
what is the bolt size , 12mm 1.25,1.50,1.75? thanks | If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld...
Bolt Sizes for a 2006 Toyota Matrix Trailer Hitch 24812
Do you know the size of bolts for 06 toyota matrix tow hitch? | All of the hitches available to fit your vehicle are Class I hitches. The most common hitch, 24812, was one which fits with or without the rear fascia. The bolts for that hitch...
2008 Toyota Matrix Trailer Hitch and Bike Rack Recommendation
I was hoping to find a 2inch tow hitch for my 2008 Toyota Matrix base model. My bike rack is 2x 2inch and I was hoping not to use an adapter. All the hitches that I have found thus far have 11/4inch receivers. | Only the larger vehicles like...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Availability of a 2 Trailer Hitch for a 2004 Toyota Matrix to Carry a Bike Rack
hoping this exists. Mostly need for a bike rack, would rather not use a converter. thanks | You are definitely on the right track when it comes to not wanting to use an adapter for your bike rack. The only trailer hitches that are a confirmed...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
Best Roof Rack Option For 2010 Toyota Matrix With Naked Roof
Hi there, I have a Toyota matrix 2010. It is bare roof and I’m looking for a roof rack to fit it. What options do you have available? Thanks Simon | Hey Simon, thanks for reaching out. We do have roof rack options for your 2010 Toyota Matrix....
Are Load Resistors Needed for LED Backup and Brake/Tail Lights
Im thinking of changing to LED lights. 2010 Toyota Matrix XR . Do you need Load Resistors for backup and brake/tail light LEDs. What would be the cost from you for LEDs. Canadian Vehicle | When changing from incandescent or halogen type bulbs...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Recommended Metal Weld on Fender for a 12" Wheel
i need to replace my axle/ spindle. my bearing size is L44649. in and out its is 5x4 1/2 i assume spindle replacement will be p.n tru44fr i need 1. 2 spindles 2. axle tube or what size to get from the metal shopthis is on a jet ski trailer...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Do You Have Counteract Tire Balancing Beads?
counteract balancing beads | Hey Anna. We have quite a few options for Counteract Tire Balancing Beads like the 4-Pack for Tandem Axle Trailers item # CA63VR. I have linked all of our options below: What kind of vehicle or trailer do you have?...
Curt Trailer Hitch For 2003 Toyota Matrix XR
I have a 2003 Toyota Matrix XR.. I previously had a 2005 Toyota Matrix XR I gave my brother which I had installed a hidden trailer hitch on. I would like to install a hidden hitch on my 2003 Toyota Matrix XR… The attachment point of receiver...
Does Yakima Rocketbox 14 Fit Inno Roof Rack that Fits 2008 Toyota Matrix
2008 Toyota Matrix with a bare roof. Per your site this rack will fit the car. Will it work with a Yakima RocketBox 14? Thanks | Hey Jessie, the Inno Roof Rack part # IN85SR that you referenced is compatible with the Yakima RocketBox Pro...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Does Thule UpRide Roof Bike Rack Fit Inno Roof Rack on 2004 Toyota Matrix
Hello, do you know if the IN59KR roof rack would work with the Thule Upride bike rack ? | Hi Simon, I'm happy to verify for you that yes, the Thule UpRide Roof Bike Rack # TH599000 is 100% compatible with the Inno rack that fits your 2004 Toyota...
Comparing Trailer Hitches # 12221 and # C12013 for a 2007 Toyota Matrix
What is the actual difference between the Curt #12221 and the #12013? Installation would be for a base 2007 Toyota Matrix. Thanks | I went out to the warehouse and examined the Curt Hitch # 12221 and # C12013. While they are similar, there...
Recommended Weight Distribution Hitch for a 7,000 lbs Short V Nose Trailer
This is a follow-up question to Adam R and your response to him. My trailer looks exactly the same as his picture...only about 15 inches of exposed frame between the center of the ball and the V Nose trailer wall. The side walls cover the side...
Filter Your Search
Contact and Help