Recommended Disc Brake Kit for Dexter 7,000 lbs Axles
Hello. I have a 2018 Keystone Fuzion 369. I’m looking to upgrade my brakes to disc brakes and was hoping you could point me in the right direction to get a good package. I would like to go with the Kodiak brand. I know my trailer has Dexter...
Availability of a 3,500LB Trailer Axle With 4 Inch Drop, 95 Inch Hub Face, and 81 Spring Center
Do you have any 95/81 axles with 4” drop and electric brake? | I see you were looking at the 3,500lb Trailer Axle w/ Electric Brakes # e45SR. While this does have the 95" hub face you are needing the spring seats are spaced 80" versus 81". You...
How To Fill Dexter EZ-Lube Spindle/Hubs With Grease And How Often Should They Be Filled?
i have a 2019 heartland wilderness travel trailor with dexter easy lube fittings. If i use my lube /grease gun and fill with lube does this fill all bearings and pin on the one im filling and how often should i repeat this process. | The spindle...
Choosing a Replacement Grease Seal for a 2,900 lb Trailer Axle
Trying to find axle seals for this trailer axle, only info I found was this on a welded on tag. Picture attached, the weight rating is 2900 pounds, thank u | Thank you for the information and the photo! For your application I recommend checking...
Will Kodiak Disc Brake Kit Fit a #84 Standard Spindle
connor says distance between hub face and brake flange is not important. not true. Im thinking of converting a 3500 axle from drum to disk brakes. If a typical 72 inch wide trailer, mine for example, has an 85/870 axle, will kodiack kr235d...
Replacement Shackles, Bolts, Bushings, and Equalizers for Tandem Axle Trailer
Looking for shackle kit Part # for tandem trailer. 9/16inch bolts at center equalizer and front/rear spring ends. 1/2inch bolts at shackle ends of equalizer and spring ends at equalizer. I want all bolts, nylon bushings,equalizers, shackles. everything...
How to Grease Boat Trailer Wheel Bearings on Trailer that Has Rubber Flange on Grease Cap
I purchased a 17foot boat with Load Right trailer in 2011. I figured that by now I should grease the wheel bearings. Wheels have a rubber flange covering the bearing. After I removed it a found no lubrication nipples or anything else where...
What Spindle Should be Used to Fit in Axle Tubing of 1-7/16 inch And 2,000 lb Capacity
Trying to make a small 2000 LB axle- can I use 13 gauge 1/8inch or 3/32inch tube thickness round tubing that I have? What spindle will I need for the inside diameter being 1 and 7/16 inch? | The best spindle option we have is the 2,000 lb...
Replacement Bearings and Seals for 1976 EZ Loader Trailer
Do you have a bearing and seal kit for my EZ Loader trailer It is a 1976 model 147-600 s# 61306R 2000# GVW axle diameter measures 1.063 inner and outer are the same | It sounds like your trailer uses bearings # L44649 for both the inner and...
Recommended Hydraulic Disc Brakes for Dexter 7,000 Pound Axles
I have a 5th wheel camper with Dexter 7000# axles. They have 8 lug wheels. I am looking for a disc brake conversion and looking for a complete kit, hydraulic actuator, lines, wiring, etc. Do you offer a kit like that? Thanks for your help. |...
Difference Between Grease Seal Numbers # RG06-070 And # GS-2250DL
Wondering what the difference is between TruRyde bearings RG06-070 and GS-2250DL. Any difference in quality? They both seem to be 2.25 x 3.376. Thanks | Both the TruRyde Seals GS-2250DL and RG06-070 have an inner diameter of 2.250 inches and...
Recommended Spring Seat for a Square Axle Tube
I purchased the SP-040275 leaf springs for a project. My axel is from another supplier. It’s a 3000 lb 3” square axel. Your leaf springs have a bolt that is dead center on the leaf where I presume the axle must sit. As such it won’t sit flush...
Replacement EZ-Lube Grease Cap and Rubber Plug
I only need the silver cap and rubber plug from the following item on your web site. Can I order that individually? Trailer Hub and Drum Assembly - 7,000-lb E-Z Lube Axles - 12inch Diameter - 8 on 6-1/2 Item # AKHD-865-7-1-EZ-K | It sounds...
What Steel Is The TruRyde 42 Spindle # TRU57FR Made From?
I saw somewhere somebody was saying this was 1045 steel. Is that the case? | Yes, the #42 Spindle # TRU57FR is made from SAE 1045 hot rolled steel bar stock. |
Should There Be a Gap Between the Grease Seal and Inner Bearing
After driving the seals in to the bottom of the taper, it looks like there is still a gap between the seal and the bearing. Should the seal contact the bearing? | A grease seal like the # GS-2250DL should not contact the inner bearing on your...
Recommended Bearings, Brake Assembly, and Hub for a Dexter 7,000 lbs Axle
Bearings, brake assembly and hub for 7000LB Dexter axle | Bearings - Inner Bearing item # 25580, Outer Bearing item # 14125A, Inner Race item # 25520, Outer Race item # 14276, and Grease Seal item # GS-2250DL Brake Assembly - Dexter Nev-R-Adjust...
Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs
Do you stock Dexter 5x4.5 1750 galvanized hub kits? I think that is what I have. The numbers on the hub backside are 8-248 , mta 21, and 194. Thanks | We do have the etrailer Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K and...
Replacement Spindles & Hubs for 1973 American Boat Trailer With Obsolete Hub & LM12749 Outer Bearing
I have a 1973 American single axle no brakes boat trailer. It has axle shafts with 1 3/8 inner and 0.86 outer diameters. It uses Timken LM12749 outer bearings. I would like to buy new hubs but dont see any with these axle dimensions | You are...
How To Determine If Mobile Home Style Hubs Can Be Replaced With Standard Hubs on 16' Boat Trailer
I have a 2000 model 16ft Hudson trailer with the mobile home style axles brakes on on both axles can I change the hubs over to take a regular wheel and tire | To determine if you will be able to convert your mobile home style axles over to a...
Troubleshooting Excessive Tire Wear On The Inside Of Left Front Tire Only
Have a 2017 268 RK SR forest river trailer trailer wirh dexter axles and have excessive tire wear on the inside of the left front tire. Have gone through 2 tires. Last one only laster 1800 miles. What could be causing this kind of wear? | Generally,...
Grease Cap For 1.95 Inch Trailer Hub Bore
The ID of my trailers hub is 1.95. Which dust cap would fit? | The correct grease/dust cap for a 1.95 inch trailer hub bore is the following: - Grease Cap # TRAG-DC-196 This has a flange diameter of 1.957 inches which is exactly what you'll...
Availability of Spindle for Square Axle Fabrication
Do you have a square spindle that will fit a 2 inch square axle. I have to fabricate a dated 45 inch pontoon trailer axle and looking for a kit with hubs and bearings also. | We have two possible options for your 2" square axle depending on...
Availability of Hub That Fits TruRyde Replacement EZ Lube #84 Round Spindle
Do you have the Hub to fit this spindle? | We do have hubs that fit the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles # TRU77FR. However, the correct hub will depend on what you are looking for exactly. This spindle uses a...
Heavy Duty Shackle Kit with Wet Bolts for Triple Axle Trailer with TREQ356 Equalizers
Hello, I have the TREQ356 equalizers on my triple axel toy hauler with 1 3/4 springs and 2 3/4 shackle straps. I would like to replace the equalizers and the shackle bolts with heavy duty shackle straps and wet bolts. I dont see any options...
Filter Your Search
Contact and Help