What Spindle Should be Used to Fit in Axle Tubing of 1-7/16 inch And 2,000 lb Capacity
Published 05/09/2019
Products Featured in This Question
Question:
Trying to make a small 2000 LB axle- can I use 13 gauge 1/8inch or 3/32inch tube thickness round tubing that I have? What spindle will I need for the inside diameter being 1 and 7/16 inch?
asked by: Doug H
0
Expert Reply:
The best spindle option we have is the 2,000 lb axle spindle part # TRU94FR which has an outer diameter of where it would install in an axle of 1.25 inches. As far as the diameter of tubing to use for the axle we really can't recommend that and be able to ensure you'd have the capacity you'd need.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Will a Dexter Trailer Hub Fit on a Lippert Trailer Axle
- Q&A: Backup Camera that Will Plug In Line with a 7-Way Trailer Connector on a 2005 Toyota Tundra
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Q&A: Recommended Replacement for Atwood G6A-7 Water Heater
- Article: Most Popular Wheel Bearings
- Q&A: What is the Correct Race for Use with Bearing # L68149?
- Q&A: What Size Axle Does a #84 Spindle Fit
- Q&A: Difference Between 205/75-15 Kenda Tires with Black Mod Wheel
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: Trailer Wiring Diagrams
- Article: How to Determine Tire/Wheel Diameter
- Article: Slipper Spring Trailer Suspension System Review
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer