!Wildcat Maxx Travel Trailer  x   >   !86  x   >   Lock N Roll  x   >  

Do you have an adjustable height mounting bracket this swivel pintle hook would attach to that includes a 2inch draw bar for use with a Class III hitch? Im looking at buying a military surplus trailer that has a pintle ring type hitch and...

Just wanted to know for the price, does this also come with the trailer end coupler as well? Or is this just the vehicle side hitch and adjustable coupler? Thanks | The Lock N Roll Articulating Hitch w/ 3-Position Channel - 2" Receivers #...

is the Lock N Roll Hitch and coupler system squirrely to back up a 16foot cargo trailer in snow with the articulation feature? | The Lock N Roll Articulating Coupler # 336TS504 along with the Lock N Roll Articulating Hitch # 336VS503505 is no...

Two questions. 1. I have a 2016 Toyota tacoma. It has a push button start, and does not have an ignition key. It does however have a key for the tailgate. Will the tailgate key work with your hitch pin locks? 2. I also will be purchasing a Lock...

I have a crux expedition trailer that came with a bolt on poly block coupler and I want to swap to a 2 ball coupler. Is there a way to do this? Ive search for couplers and nothing seems to fit the A-Frame, so possibly a 2inch ball with a straight...

Hi, Do you sell a locking pin of sufficient length to replace the non-locking 1/2 inch pin Item # 336HP001 that comes standard with 11K Lock n Roll hitch vehicle side? | We've checked with Lock N Roll in the past and while they don't offer a...

What is the measurement from center of latch slot to center pin width and max height? Not enough measurements are provided to calculate this myself. | I spoke with my contact at Lock N Roll about the Lock N Roll Articulating Hitch part # 336VS503505...

Would you have a coupler to lunette adapter Thanks! | The closest thing that we have to what you are looking for is something like the Demco # Demco Trailer Coupler w/ 5-Position Adjustable Channel # DM6125-81 (which can come in a variety of...

Can you back up with it like a ball hich? | Yes, the Lock N Roll Articulating Trailer Hitch # 336VS501 will allow you to backup your trailer just like a traditional ball hitch. Since the hitch and Coupler # 336TS528 lock onto one another there...

Does an articulating hitch like Lock N Load effect the weight carrying capacity of a hitch or is it the same as a ball hitch? I have a 6600 lb trailer Im buying and according to the light pickup truck manufacturers 5000 lb load carrying limit...

Hi: My 13 foot Scamp Trailer recently flipped onto its side behind my 78 Landcruiser. It isnt pretty and Im currently learning a little about fiberglass repairs! My question is, since the Scamp has a ball hitch receiver, will I have to have...

My Tongues OD is 2.5. So I would need the 2.5 channel coupler. Correct? | Yes, since your trailer tongue is 2.5 inches wide the correct Lock N Roll Channel Trailer Coupler is the part # 336TS506 which was designed for this size. |

I did not see where to ask the question previously. I have a 2007 little guy double wide tear trailer and want to add the Demco 50 degree A frame coupler. However it appears my A frame is not 50 degrees. With a small protractor I am getting...

I want a LOCK N ROLL hitch with about a 4-6 adjustable and rise. Is it also possible to get a 1 7/8 and 2 ball that will work with this system so I can change them out with the different trailers I have? | The Lock N Roll Articulating Hitch...

Do you carry a hitch connection for an off road adventure trailer that would twist and roll with the terrain while connected to tow vehicle? | It sounds like you're looking for an articulating coupler. For the trailer side of the equation,...

Is the Lock N Roll vehicle side 336vs503 compatible with the Curt channel that is included with the C45900? | Yes, you can install the Lock N Roll Articulating Hitch # 336VS503 on the Curt Channel Style Adjustable Ballmount # C45900. The holes...

Is there an adjustable mount for 1 1/4 shank? | The Lock N Roll 3-Position Adjustable Channel Bracket for 1-1/4" Hitch Receivers # 336VS507 will allow you to use a Replacement 2" and 2-5/16" Dual-Sided Hitch Ball # C45912. This will give you...

where on earth is the location to grease this? I cant find on either the truck or trailer side? | There isn't a grease fitting on the Lock n Roll setups like the part # 336VS501 that you referenced. Greasing it would require manual application...

Hi, What type of trailer side lock do you recommend for a lock and roll hitch? We’re buying a camping gear hauler that has a lock and roll hitch and would like to secure it when we leave it at a campsite for the day. Could you also recommend...

Can I mount this upside down to give lift to my trailer? | Yes the Lock N Roll Articulating Hitch w/ 5-Position Channel - 2" Receivers - Vehicle Side - 11K # 336VS503515 you were looking at can be used in either the rise or drop position to...

Hello, will the 336ts504 fit a 2021 Forest River No Boundaries 10.6? | Yes, the Lock N Roll Articulating Coupler # 336TS504 will fit as a replacement for the standard coupler on your 2021 Forest River No Boundaries 10.6. You will of course also...

I need a for my existing LockNRoll set up but specs are different from your site and LockNRoll, and dont make sense. The 517 appears to be a shorter bracket in photos however is a larger spec at 4.5? The 503+507 combo appears to be a longer...

Good morning, Just starting to do research on buying a lock and roll hitch system for our small Escapade trailer about 1300 lbs. Will be towing it with a 2019 Subaru Ascent. On the vehicle side what is the difference of using # 336TS505 and...

I have a 2018 NuCamp Tag Boondock Edition tear trailer and want to replace the standard ball socket coupler with this one. Will it fit? Thank you. : | I looked up pictures of the front of your 2018 NuCamp Tag Boondock Edition and it uses a...