!Monaco  x   >   BulletProof Hitches  x   >  

I just received my Bulletproof 2 1/2 12inch hitch 2 ball 2inch and 2 5/16. When the balls are are mounted in the hitch with the 2inch set for a 12inch drop the 2 5/16inch ball is only 6inch from the ground. In looking on the internet where...

Is theDemco 2-Tang Clevis # DM12676-30 compatable with the BulletProof Hitches Adjustable 2-Ball Mount for 2inch Hitch - 4inch /Rise - 14,000 lbs - MD204? | Yes the Demco 2-Tang Clevis - Adjustable Channel Mount - Black Paint - 20,000 lbs Item...

I welded a tow bar onto the tongue of my 1964 RV to a straight hitch on my 2007 Honda CrV. Now, I will be using 1997 Jeep to tow RV but hitch opening is much higher off the ground. Is there something I can buy to that drops down but will still...

Hello Im looking for something like this with only a 4inch rise/ offset. Do you have anything? Im assuming that the standard adjustable hitches are not meant to be used upside down so that you can raise the ball instead of it. Please let...

I already have a bulletproof 6inch hitch. Can I use this clevis pin attachment to regularly tow a pintle trailer, or should I get a separate pintle hitch specifically for my trailer? | You should have no problem using the 2-Tang Clevis for...

Is there a plug and play trailer wiring harness that will be usable in my 2019 Jeep Wrangler that already has a Blue Ox plug and play towbar wiring harness in place? I prefer not to cut and splice any of the factory wiring or the towbar wiring...

Is there an attachment so I can tow pintle hook style with the HD256? | Yes, to tow a pintle hook style trailer with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # HD256 you just need the Pintle Lock # 358Pintleattachment |

I need to order the correct trailer hitch for a dodge 3500 2012 dually. I need a correct part # to order one and is it in stock. | For your 2012 Dodge Ram 3500 Dually I recommend the Curt Class V Trailer Hitch Receiver # C15809 as it will fit...

what is the distance from center of ball to center of pin that attaches hitch to receiver. need min 10 inches | For your 10 inch minimum I recommend the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch - 6" Drop/Rise - 22,000 lbs...

When will you have the 3 reciever for the weight distribution hitch? I currently have a Ram 1500 and moving up to a Ford F350 and didnt want to add two s to my current steel weight distribution hitch. | While it is uncertain if or when someone...

I have an 11-1/2 drop down, but my trailer still rides a little high, i need a couple more inches of drop. is there any product similar to this for use on travel trailers? C27KR | While we do have a solution for you, there isn't an adapter like...

will this part work on my f-250 to tow a 20-ft equipment trailer 7000-lb hauling a 5545 4x4 mahindra tractor with loader. | The BulletProof Hitch # HD2010 adjustable ball mount has a 12K capacity when used with the 2 inch ball or a 30K capacity...

What are the pin spacing increments measurements? Also - does it matter is it ok to use this in either direction - i.e. upside downinch for more height above the receiver, if needed? | The BulletProof # MD204 ball mount has 4 inches of rise...

Hello, The trailer hitch on my vehicle is recessed behind the bumper by about 5". I am looking for a heavy duty adjustable ball mount that will clear the bumper. I tried a friends weigh safe ball mount and it was much too "short" and it hit...

Hello, I recently purchased a hitch from you for my 2023 CX-9 Item # 76020 The hitch is very low and recessed a good bit. I need to get an adjustable receiver to raise the ball. The challenge is how far the receiver is recessed. I own...

What are the actual dimensions of the pin? How far into the lock does the pin actually go? | The BulletProof Hitches Receiver Lock item # BPH54FR is 7-5/8" overall. The 5/8" portion that goes into the receiver is 4" long so it will work with...

I’ve got a 2017 ram 2500. Was wondering what hitch would be best I’m being told 8” and 10” by people. I’m wanting an adjustable with heavy tow weights. Thanks for your help | When it comes to picking an adjustable hitch with the best rise/drop...

Is the part with the hitch balls replaceable? Long story short I won't be asking my wife to mess with the hitch anymore... | Yes, the ball platform on the BulletProof Hitches 2-Ball Mount # ED204 is replaceable with the following part: - Replacement...

BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2inch Hitch - 6inch /Rise - 14,000 lbs Item # MD256. Does this hitch come complete with a 2inch and 2 5/16inch ball set up or is it sold separately. | The US made # MD256 BulletProof hitch...

lock kit for HD254 | To lock the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # HD254 to your hitch receiver I recommend the InfiniteRule Hitch Lock # 34061072-D, but if you're interested in locking the platform to the ball mount as well...

What is your largest drop receiver for a 3" Ford receiver? | The BulletProof Hitches 2-Ball Mount # HD3016 is our largest drop receiver that fits a 3" Ford receiver. This receiver includes a 2" and 2-5/16" hitch ball and gives you a 17-1/4"...

you call this a 4inch drop and a 4inch rise, but on bulletproof web site this item with 4 hole adjustment is called a 2inch drop/rise hitch. am I reading something wrong? | This is a reason we measure and label our site all the same way rather...

Hi. I am looking for a 2 inch ball mount hitch adjustable to 6 inches up and down. is there such a hitch with a longer or extended shank? i am trying to clear the tire on the back of my jeep wrangler. Thanks | I recommend checking out the BulletProof...

Hi, I need a clevis adapter for my BandW multi hitch. The BandW has 1 1/8 hole. Is there another clevis adapter that would fit a BandW but with a 1 hole? Thank you | While there are no clevis adapters with a 1" diameter hole, the 1-1/8" hole...