Adjustable Ball Mount With Drop That Has Sway Control Tab

Question

Question:

I welded a tow bar onto the tongue of my 1964 RV to a straight hitch on my 2007 Honda CrV. Now, I will be using 1997 Jeep to tow RV but hitch opening is much higher off the ground. Is there something I can buy to that drops down but will still let me use the straight hitch with the little sway bar ball welded on it?

asked by: Peggy

0

Expert Reply:

It sounds like you are looking for a ball mount with drop that is able to utilize a sway control tab, and we do have an option for that, with a ball mount from BulletProof Hitches along with a ball mount platform with a sway control tab. The platform would be the following part:

- Sway Control 2-Ball Platform for BulletProof Hitches Ball Mount # 358SWAYCONTROLBALL

This platform comes with 2" and 2-5/16" hitch balls with the sway control tab and ball on the side so you can connect your friction sway control. It would require the use of a BulletProof Hitches ball mount, and you can choose the right one based on the amount of drop you need.

- 4" Drop: BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch # MD204
- 6" Drop: BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch # MD206
- 8" Drop: BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch # HD208

I have added links below to video reviews for you to check out as well if you'd like to take a look.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Lauris! Is the Brinkley prepped for a generator or are you saying it has room for one? If it doesn't have some kind of generator prep you're going to need a lot of parts from Cummins to install #CM44MR. You will have to add a fuel tank,…

view full answer...

Answer 8

Hey Larry! Yes, the Onan Generator - QG 7000i Onboard RV Generator #CM44MR is capable of using a remote start. For a standard setup, you can use a switch like #CM86RR along with an extension harness #CM26RR. You can also use the EC-AGS+ Auto…

view full answer...

Answer 9

Hey John, this is a great question. I asked B and W about whether or not the B and W Fifth Wheel to Gooseneck adapter part #BW73RV would void the frame warranty and they said it has been extensively tested and engineered to provide a smooth, stable…

view full answer...

Answer 10

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 11

Hey Shawn! Yes, the B&W 5th Wheel to Gooseneck Pin Box #BW23RV does include safety chains. That is one of the first things we asked them when they came by to show us the new pin box. Gooseneck pin boxes are already pricey, and it can be easy to…

view full answer...

Answer 12

Hey Tom, congrats on the new truck. So long as your PullRite SuperGlide 2900 5th Wheel Hitch mounts to industry standard 5th wheel rails like item #PUL63RR you will be able to use the Adapter Rails item #PUL69RR to mount this hitch in the puck system…

view full answer...

Adjustable Ball Mount With Drop That Has Sway Control Tab

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching