!300M  x   >   !iX  x   >   Patriot Hitches  x   >  

Can this be used on a vehicle with a lift that uses a weight distribution hitch? | My recommendation is to use a replacement drop shank like the Equal-i-zer Weight Dist Shank # EQ90-02-4400. This shank is capable of up to 9" of drop and will...

What is the difference between this hitch and the patriot PH67SR | The difference is the color of the pin and clips of the two kits. The Patriot Adjustable Hitch Adapter part # PH67SR has black pin and clips whereas the # PH54FR has red ones. |

max weight capacity Part Number PH54FR. What is the max tongue and towing capacity when the receiver is extended fully? The video said there was a chart on your site, but I cant find it. | There is not a maximum capacity for the Adjustable Drop...

I have an off road trailer that I tow with my jeep. I use a anti-sway setup when on the road. It uses a 2 receiver to attach to my vehicle. My problem I need to tow my trailer with my 02 Dakota, but the hitch level is too low. I need to raise...

I lifted my truck with the LockNRoll and now need to the vehicle side mount. This is considerably less that their product, I can keep my existing straight mount and i like how it adjusts the as needed vs an adjustable attachment to a fixed...

HI I asked the following question and got a great answer but it leads me to another question. Initial question was: I have a small trailer with a gvwr of 3500 lbs and 409lbs for tongue weight. I am wanting to rent this trailer out and am looking...

What is the difference between PH54FR and PH67SR? | The only difference between the Patriot Hitches Adjustable Drop Hitch Receiver Adapter part # PH67SR (Black Ops) and part # PH54FR (Red Ops) is the color. The former has black accents and the...

Does this adapter reduce the total tongue weight allowed? I have a 2021 Promaster City van that is used for pool service. I have a class 3 hitch that is rated for 350 pounds gross tongue weight. I’ve read that these adapters cut the tongue weight...

What is the distance from the center of the pin hole to the back of the angle bracket please? I need the hitch extended beyond my bumper on my 2015 Itasca Sunstar to add a platform for my daughter’s ActionTrac wheel chair, which weighs a little...

101001 Patriot Hitches General Rod-Ops Adjustable Rise/ hitch. In the video the guy mentioned a chart on your site that shows the decrease in towable and tongue weight this hitch can handle once you adjust it. But I cannot find this chart. |...

looking to purchase a Blue Ox Hitch Receiver Immobilizer II - 2inch Hitches Item # BX88224 to use with PH54FR patriot hitches which i will also purchase if it will work with my Subaru Ascent factory mounted hitch which is located in the bumper....

I recently purchased the Maxxtow Adj Tri-ball Mount - 2inch Hitch - 5.75inch /rise, however, the distance from the pinhole to the shank is not long enough to clear the bumper. This products description said it had a long shank, but was even...

Can you kindly advise what is the wall thickness of the square tube. It looks like it is 1/8 inch but I am not sure. Thanks in advance. | The thickness of the wall of the 7,000 lb-rated Patriot Hitches Adjustable Drop Hitch Receiver Adapter...

Hi, We have a 25 foot class c motor coach with a two inch hitch. Our coach has a slide out the back so we need a two bike tilt away rack that is tough enough to hold up. We would like to tilt with bikes on so not sure if we should use a hang...

I am looking for a two bike hitch mount bike rack that will keep the bikes low to the ground. I have a 2017 F350 and installed an aftermarket bumper which has an integrated hitch reciever 2 inch . Because it is part of the bumper and not...

Can you use this down receiver with an extension receiver. I have a large spare tire and I need to clear it in order to attach my trailer. | I do have a solution, but I would not recommend using a hitch extender with the Patriot Hitches Adjustable...

I cannot understand the bolts and how to put the cotter pins on. It seems to require superhuman strength. | Yeah, I hear you. The cotter pins when they're new are extremely difficult to get in and out of the pins. You're going to have to keep...

Hello, Can you recommend an adjustable drop hitch to be used with my camper and associated WDH gear? My toy hauler with motorcycle is approximately 6500lbs. Vohn | First Vohn, if you can tell me what weight distribution hitch you are using...

I am carrying a stand up jet ski on a hitch carrier at the back of my truck. I want to use a riser to raise it a bit, to avoid potential dragging when going in/out of driveways. A /riser like this would work, but it says it is for flat towing...

I have a ford f150 4x4 need to the hitch aprox 7in , the travel trailer I am pulling is aprox 5000lbs and I have sway bars on my current ball mount.. can i use this | I have another option for you, but while the Patriot Hitches Adjustable...

I am looking for a down hitch adapter. My truck has a 2.5inch receiver, and my anti-sway hitch on my RV needs a 2inch receiver. Either an adjustable or fixed would work. I would prefer not to an additional reducer sleeve if possible. | If...

My 2020 Ram 2500 has a 2-1/2” receiver. I need a 6” drop adapter that will hold my 2” bike rack. | You will want to use the Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR with a Reducer Sleeve # 325-GH-007 to carry your bike...

I have a 2010 dodge grand caravan sxt. The hitch has 675 tongue weight. Im looking for a 6 inch rise capable of supporting a 70 pound hitch and s 400 pound wheel chair. Can you help. | The Patriot Hitches Adjustable Drop Hitch Receiver Adapter...

Do you have or can you make a hitch 16 inch male by female | Hello David, are you looking for a Patriot Hitches Adjustable Drop Hitch Receiver Adapter in a 16" drop? If so, I am afraid the 11" drop # PH67SR is the largest they make. If you...