2019 Jayco Redhawk SE Motorhome RV Transfer Switch

If I understand your statement correctly, you have the Furrion Automatic Transfer Switch, #F50ATS installed but are not getting power to the RV. If you have not yet attempted to isolate/by pass the transfer switch to ensure the issue is within the…

For your 2018 Ram 2500 with the factory puck system the best 5th Wheel Hitch is the B&W OEM Companion. If you have the 8 foot bed then you will want the fixed 25K #BWRVK3600 and if you have the short 6-1/2 foot bed you will need the 20K Slider…

Yes, the Furrion Automatic Transfer Switch - 50 Amp - 125/250V #F50ATS is a compatible replacement for your Intellitec 50 amp transfer switch. This transfer switch automatically reroutes your RV's AC input from shore power to generator power when…

The Go Power Automatic Transfer Switch #34264403 that you referenced is a good way to automatically switch between shore power (when available) and an inverter that's being powered by solar charged batteries. It is always going to use shore power…

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

Hey Rob, the big differences between the two transfer switch is that the Go Power part #34270278 is made in the USA and has a metal case whereas the Furrion part #F50ATS is not made in the US and has a plastic case. This is why it costs less.…

The Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V #PD52 (Alternatively PD52V) and the PD52DCS/PD52DCSV are both part of the PD52 series but there are some differences. Both share the same voltage rating and current ratings.…

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. This…

Hey Larry, the Dometic FreshJet 3 part #DMC69ZR that you referenced does not require an additional control board to work. Basically you just need to run the power wires to it and it' ready to go as the controls are internal and on bottom of the…

Hello Anthony, I get what you are trying to do, but it's not a good idea, here is a couple of reasons why: -By creating this loop you will drain your battery too quickly. The converter charges the battery by taking AC power (shore power) and…

Hey William, thanks for reaching out! The PD5110610 was discontinued and replaced with the Transfer Switch w/ Quick Flip Connectors #PD5110010Q so this is the part you'll want to use as a replacement.

Hey Robert & Carol, That part number comes back to a custom order piece. Is this the channel on the side of your RV that the fabric from your awning slots into, like part #LC715216? If you'd like to email me some pictures I'd be happy to…