RV Roof Repair Specs:
Features:
Replace or upgrade your RV roof with this lightweight, rubber roofing membrane. Single-ply, TPO material doesn't contain plasticizers, which degrade over time, making it more durable over the years. Measures 15' x 4-1/2'.
More Information >RV Roof Repair Specs:
Features:
Replace or upgrade your RV roof with this lightweight, rubber roofing membrane. Single-ply, TPO material doesn't contain plasticizers, which degrade over time, making it more durable over the years. Measures 15' x 4-1/2'.
More Information >RV Roof Repair Specs:
Features:
...Roofing membrane replaces or upgrades the roof of your RV Works with most Class B motorhomes and up to 20' travel trailers Single-ply Superflex membrane is lightweight, flex...
More Information >RV Roof Repair Specs:
Features:
...Roofing membrane replaces or upgrades the roof of your RV Works with most Class B motorhomes and up to 20' travel trailers Single-ply Superflex membrane is lightweight, flex...
More Information >RV Roof Repair Specs:
Features:
...Roofing membrane replaces the roof of your RV Single-ply membrane is lightweight and flexible 10% Thicker, 220% stronger, and stretches 500% longer than PVC roofing Superior Superflex...
More Information >RV Roof Repair Specs:
Features:
...Roofing membrane replaces the roof of your RV Single-ply membrane is lightweight and flexible 10% Thicker, 220% stronger, and stretches 500% longer than PVC roofing Superior Superflex...
More Information >Videos
for RV Roof Repair
Help Articles
for RV Roof Repair
Expert Answers
for RV Roof Repair
We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers…
view full answer...Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still…
view full answer...While trailer axles do feature an upward bend like you are describing, there isn't a particular amount/measurement that is standard across the board. This bend in the axle is designed so that it will straighten under a…
view full answer...We have a full replacement for your light. The Command Electronics #CE86FR. Take a look at the attached video to see them in action.
view full answer...I believe you are referring to the XTRM Universal Sealant #34427034145-1. If so, it can absolutely be used in place of the original XTRM 100 that was on your roof. This will work just as well as the original sealant and its weather-resistant…
view full answer...The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E…
view full answer...Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...In order to install a brake controller on a dump truck you'd first need to start with a 4-way trailer connector and then adapt this to a 7-way so you can hook up a brake controller. I won't have much info for anyone particular…
view full answer...