Trailer Lights Specs:
Features:
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.
More Information >Trailer Lights Specs:
Features:
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years of use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" Silver/11" red.
More Information >RV Exterior Lights Specs:
Features:
2-5/16" x 2-5/16". LED security light illuminates your RV's exterior with what white light to deter unwanted guests. Surface mount - hardware not included. 2-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use
More Information >RV Exterior Lights Specs:
Features:
Motion-activated, solar powered LED porch light with dusk-to-dawn sensor provides lighting, safety, and security. 3 Preset modes let you customize the light to suit your needs. Solar panels charge the battery so there's no wiring required.
More Information >Trailer Lights Specs:
Features:
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years of use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" Silver/11" red, perforated.
More Information >RV Exterior Lights Specs:
Features:
Motion-activated, solar powered LED porch light with dusk-to-dawn sensor provides lighting, safety, and security. 3 Preset modes let you customize the light to suit your needs. Solar panels charge the battery so there's no wiring required.
More Information >Trailer Lights Specs:
Features:
4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Trailer Lights Specs:
Features:
18" Long x 2" wide. Alternating red/white reflector tape makes your truck or trailer more visible in low light. 7" White/11" red pattern. Industrial-strength adhesive backing for easy mounting. 4 Strips included.
More Information >Trailer Lights Specs:
Features:
21' L x 2" wide; alternating red/white reflector tape; DOT certified; rated for 7 years of use
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 4 strips; DOT certified; rated for 7 years of use
More Information >Trailer Lights Specs:
Features:
3-1/2" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.
More Information >Trailer Lights Specs:
Trailer Lights Specs:
Features:
3-3/16" x 1-11/16" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
3-1/8" x 1-3/8" Rectangle red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
This rectangular, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.
More Information >Trailer Lights Specs:
Features:
4-7/16" x 1-15/16" Oval. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.
More Information >Trailer Lights Specs:
Features:
3-1/8" x 2" Rectangle. LED trailer light serves as either a side marker light or a clearance light. Built-in reflex reflector. Stud mount. 2-Wire design. P2 rated.
More Information >Trailer Lights Specs:
Features:
4-7/16" x 1-15/16" Oval. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.
More Information >Trailer Lights Specs:
Features:
2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Trailer Lights Specs:
Features:
3-7/8" x 1-1/4" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
4-5/16" x 1-11/16" Rectangle amber reflector. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
4-3/8" x 1-15/16" Oval. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3" Diameter amber trailer reflector enhances visibility on the road. Designed for use on side or rear of your truck, trailer, or equipment. Durable polyester construction for outdoor use. Surface mount adhesive backing. J578 and J594 compliant
More Information >Trailer Lights Specs:
Features:
2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Trailer Lights Specs:
Features:
4-5/16" x 1-11/16" Rectangle red reflector. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
This rectangular, amber reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
4" x 1-1/4" Rectangle, red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Trailer Lights Specs:
Features:
2-3/16" Round reflector; acrylic lens; surface mount; self-adhesive; red lens
More Information >Trailer Lights Specs:
Features:
This 3" round, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
4-3/8" x 1-15/16" Oval. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Trailer Lights Specs:
Trailer Lights Specs:
Features:
3-1/8" x 1-3/8" Rectangle amber reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
150' L x 2" W; alternating red/white reflector tape. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" White/11" red pattern, perforated. 1,000 Candlepower.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We…
view full answer...Yes, it will and hello! The Triple LED Trailer Tail Light item #CE44VR is the direct replacement for the older Command 003-30. It's got the upgrade LED's along with a better…
view full answer...Hi Ken; I reached out to Lippert on this and they were unable to find the specific pressure from the #LC689052 testing. It is a large company and sometimes information gets lost across it with other brands like the Flow Max. I would say the pump is…
view full answer...You have a good eye as the black tubing sections are plastic for the Camco Gen-Turi RV Generator Exhaust System #CAM44461. It's just the curved pipe section that is made out of stainless steel.
view full answer...The side plates of the B&W gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail of your 2004 Dodge 2500 8-foot bed. See the B&W video I included at the 7 min…
view full answer...Your air bag mounting location will determine compatibility with the Gooseneck trailer hitch #BWGNRK1313. The side plates of the gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail. See diagram to the right and video…
view full answer...I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they…
view full answer...I didn't receive a picture which you can email to me directly if you would like. However, since you have a Dexter D60 axle you will need the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal item #BK3-200 you were…
view full answer...There unfortunately isn't a guide that lists the parts used on your trailer so you'll need to do a bit of investigating to see what you currently have so that we can determine the…
view full answer...To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.
view full answer...There is a tab on the top of the Porch Light part #DG52526PB that you will push down with a small slot screwdriver which will allow the cover to pull forward and give you access to the mounting screws on the base of the light.
view full answer...