Trailer Lights Specs:
Trailer Lights Specs:
Features:
...2.65 amps Tail light: 2.1 amps 3-Year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface...
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn...
More Information >Trailer Lights Specs:
Features:
...with less power output No bulbs to replace - no brittle filaments Durable black ABS plastic base and snap-on lens Red lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer ...
More Information >Trailer Lights Specs:
Features:
...LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x 2" tall x...
More Information >Trailer Lights Specs:
Features:
...one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...
More Information >Trailer Lights Specs:
Features:
...Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat...
More Information >Trailer Lights Specs:
Features:
...Rectangular RV tail light serves 3 functions Stop light Tail light Turn signal light ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount...
More Information >Trailer Lights Specs:
Features:
...Replaceable incandescent bulb Clear lens for license plate light License plate mounting bracket is built in Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire...
More Information >Trailer Lights Specs:
Features:
...Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for...
More Information >Trailer Lights Specs:
Features:
...replaceable Red lens over white LEDs Compatible with 12V DC electrical systems Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs...
More Information >Trailer Lights Specs:
Features:
...center on center): 3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not...
More Information >Trailer Lights Specs:
Features:
...3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into...
More Information >Trailer Lights Specs:
Features:
...dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep Bulb type: 1157 bulb Power draw at 12.8 volts: Stop light: 2.65 amps Tail light: 2.1 amps 3-Year warranty Surface-Mount Light Surface-mount...
More Information >Trailer Lights Specs:
Features:
...Rectangular RV tail light serves 3 functions Stop light Tail light Turn signal light ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount...
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
...and a side marker light or as a rear clearance light and side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...
More Information >Trailer Lights Specs:
Features:
...Red Reflector 1" x 12" Adhesive backing 2 Mount holes measure 7-7/8" apart Meets NHTSA ruling...
More Information >Trailer Lights Specs:
Features:
...Microprisms per square inch for superior reflective power Durable construction is fully sealed and won't rip or tear Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and...
More Information >Trailer Lights Specs:
Features:
...can be easily replaced Durable white ABS plastic base Red snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Twist-in socket...
More Information >Trailer Lights Specs:
Features:
...hardware. Red light functions as clearance, side marker light Weather and corrosion resistant Dual bulbs increase light output Single-wire design grounds through mounting hardware Surface mounts on 3"...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed...
More Information >Trailer Lights Specs:
Features:
...can be easily replaced Durable black ABS plastic base Red snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Twist-in socket...
More Information >Trailer Lights Specs:
Features:
...Low-profile reflector increases visibility of vehicle at night and in low lighting Durable aluminum housing is rustproof Surface mount to trailer - hardware not included Made in the USA...
More Information >Trailer Lights Specs:
Features:
...Trailer reflector increases visibility of vehicle at night and in low lighting Chrome bezel provides a finished look Surface mount to trailer with adhesive backing Meets FMVSS 108 standards...
More Information >Trailer Lights Specs:
Features:
...over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant PC rated Specs: Dimensions: 3-7/8"...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly applied Specs...
More Information >Trailer Lights Specs:
Features:
...2-3/16" Diameter, round reflector Acrylic lens Surface mount Self-adhesive Red lens...
More Information >Trailer Lights Specs:
Features:
...Microprisms per square inch for superior reflective power Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions: 2-7/8"...
More Information >Trailer Lights Specs:
Features:
...Red trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed...
More Information >Trailer Lights Specs:
Features:
...Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat...
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
Hi Jim; for the braking system you need the Second Vehicle Kit for Demco Air Force One Flat Tow Brake System #SM99209. This kit comes with all of the vehicle side components for your 2020 Ford F-150. For wiring to use your brake lights you need the…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…
view full answer...Hello Cale, thanks for getting in touch. We do offer some off-road tires but nothing in a…
view full answer...Thanks for reaching out, Steve! The Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR will be about…
view full answer...Hello Steve. It sounds like you have the ProTECHtor LP Gas Detector which is an older model that is unfortunately no longer available. We do offer a similar LP gas detector, but it is not a direct replacement. What we have is the RV Propane Gas and…
view full answer...I have a solution that may work for you, but we do not currently have any…
view full answer...Let&am…
view full answer...Hey Robert, The Optronics 12V LED RV Dome Light #UCL60CSWNB is going to be the closest option we currently offer to the L26-0091-NW-REV part number you have.…
view full answer...I believe we have just about everything you need, ideally…
view full answer...Hey Jason, so we know that your 2020 Grand Design Solitude 390RK does have 8k axles so in terms of capacity the leaf spring part #e89FV that you referenced would work but we…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hey David, so we have the Air Lift kit part #AL57344 that fits your 2019 Winnebago Class A motorhome that is built on a F-53 chassis. This fits as long as the GVWR is NOT 24 or 26k so you would need to verify that. This is only option we have…
view full answer...