Trailer Lights Specs:
Features:
1-1/2" Diameter round. LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. Durable chrome-plated steel housing. Easy, snap-in installation. 2-Wire pigtail.
More Information >Work Lights Specs:
Features:
4-5/16" Diameter round. Waterproof, LED trailer utility light produces bright white light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
1-13/16" Long x 2-1/2" wide x 2" deep. Single-LED trailer light illuminates your license plate. Chrome-plated steel housing has a built-in flange for surface-mount installation. 2-Wire pigtail with power and ground wires.
More Information >Trailer Lights Specs:
Features:
3-3/8" Long x 2-3/8" wide x 2-3/16" deep. Round, incandescent trailer light illuminates your license plate. Chrome-plated steel housing. Surface mount with mounting ears. Single wire design grounds through the mounting hardware.
More Information >Trailer Lights Specs:
Features:
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter round. Waterproof trailer light with chrome-plated brass housing illuminates your license plate. Easy, snap-in installation. 2-Wire pigtail includes lead and ground wires. White polycarbonate lens with white LEDs.
More Information >Trailer Lights Specs:
Features:
3/4" Diameter round. Waterproof trailer light illuminates your license plate when mounted with the required bracket (sold separately). 2-Wire pigtail with 0.108 female barrels. Clear lens with white LEDs.
More Information >Work Lights Specs:
Features:
3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 2-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
1-5/16" Diam x 2" L on a Base; Chrome-plated armored steel housing; replaceable bulb; surface mount on 2" centers; 1-wire; 1-bulb incandescent
More Information >Work Lights Specs:
Features:
3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 3-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
1-1/16" Diameter round. Mini LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Recessed mount with included grommet. 2-Wire lead design 0.180 bullets.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter round. Waterproof, incandescent trailer light with illuminates your trailer's license plate. Durable chrome-plated steel housing. Snap-in design secures into 1-1/4" diameter cutout. 1-Wire design. (1) 168 bulb.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter x 2" long. Incandescent trailer light illuminates your license plate. Durable chrome-plated brass construction. Snap-in mounting. 1-Wire design. (1) 67 bulb.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Work Lights Specs:
Features:
3/4" Diameter waterproof utility light with black trim ring illuminates your trailer's interior with bright white light. Durable polycarbonate housing and lens. Recessed mounted with included grommet. 2-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
2-3/16" Round reflector; acrylic lens; surface mount; self-adhesive; red lens
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
This 3" round, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
3" Diameter amber trailer reflector enhances visibility on the road. Designed for use on side or rear of your truck, trailer, or equipment. Durable polyester construction for outdoor use. Surface mount adhesive backing. J578 and J594 compliant
More Information >Trailer Lights Specs:
Features:
2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Work Lights Specs:
Features:
2" Diameter waterproof utility light illuminates your trailer's interior with bright white light. Durable polycarbonate lens and housing. Flush mount with grommet (sold separately). Accepts industry standard 2-prong plug.
More Information >Work Lights Specs:
Features:
2" Diameter waterproof LED utility light adds bright white light to an interior area. Miro-Flex design provides increased light output with a contemporary design. Flush mount with grommet (sold separately). Accepts standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
Hey Barry, so the GE Profile Propane RV Range with Glass Cover #GE24VR used to come with a glass lid but it looks like they updated it and now it is sold separately like with the part #GE74VR.
view full answer...Hey Dick, Extra space for mounting and breathability for the unit itself is why the manufacturer lists the cutout hole needing to be 22-7/16" wide x 15-3/16" tall. That being said if your cutout hole is smaller but can still fit the #HP99ZR…
view full answer...Hello Jamie, thanks for reaching out. We may have a lift kit for your axle, but I would not have a way to know what axle is on your trailer. RV manufacturers just do not list this kind of information online. If you can tell me the weight capacity of…
view full answer...The lens on the RV Oval Porch and Utility Light #RVPL7C is held to the housing with some tabs on the lens that fit slots on the housing. To remove the lens you will need something thin and flat like a knife or small screwdriver to gently pry the lens…
view full answer...I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…
view full answer...For your 2018 camper van on the Ford Transit 350HD having the dual wheel wheels I recommend installing the SumoSprings Solo Custom Helper Springs #SSR-121-54. These will help to reduce the rear end sag and increase stability around turns. The…
view full answer...Yes, The Timbren Spacer #T68MR will work with The Timbren Suspension Enhancement #TGMRTT35D on your 2016 GMC Sierra 2500 per the manufacturer. The kit already comes with (2) one inch spacers in the package. You can use up to 1 inch more on the…
view full answer...Since you have a 6" lift on your 2014 GMC Sierra 1500 you will need a lift spacer in order for the Firestone Ride-Rite Air Helper Springs part #F2430 to work. The correct way to measure for a lift spacer is when the truck is on the ground…
view full answer...The Roadmaster TruTrac Front-Axle Trac Rod #RM-TRAC-F550 is only designed to be used on vehicles that do NOT have an OEM trac bar so you cannot use two of them. If you are still having trouble steering your best option to use with the front and rear…
view full answer...Hey Jeffery yes that's true. SumoSprings are going to give you a better ride because SumoSprings are progressive springs, so their initial engagement is lighter than the Timbrens. There are a bunch of different ones for your GMC, but I'd…
view full answer...Hello Roger. On the ATAK Solar Motion Light - Weatherproof - 460 Lumens #PT701, there is a switch/button located on the back. I have attached a picture so you can see where it is located.
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Filters
30 results