Trailer Lights Specs:
Features:
...for application and mount with peel-and-stick adhesive backing Hardwires to any 12-volt power source with 2-Wire pigtail Available snap-on connector allows you to easily attach 2 sections of LED light strip (A90P1B...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Al...
More Information >LED Strip Lights Specs:
Features:
...outdoor locations. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often...
More Information >Work Lights Specs:
Features:
...No bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mount - hardware included 2-Wire pigtail...
More Information >Trailer Lights Specs:
Features:
...as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against...
More Information >Trailer Lights Specs:
Features:
...6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-exist...
More Information >Trailer Lights Specs:
Features:
...as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against...
More Information >Trailer Lights Specs:
Features:
...Passenger side: 328-003-81BM1 (sold separately) Dimensions: 8-11/16" long x 5-7/8" tall x 2" deep Diodes: 22 1-Year limited warranty Surface-Mount Light Surface-mount trailer l...
More Information >Trailer Lights Specs:
Features:
...to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Surface mount - hardware not included 2-Wire design - includes lead wire for power and ground wire Specs...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer...
More Information >Trailer Lights Specs:
Features:
...Diodes: 1 Power draw at 12.8 volts: 0.054 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Al...
More Information >Trailer Lights Specs:
Features:
...2" deep Diodes: 22 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface
More Information >
Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construction of...
More Information >Work Lights Specs:
Features:
...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no panel cutout required 2-Wire design includes power lead and ground wire Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
...LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x 2&quo...
More Information >Trailer Lights Specs:
Features:
...span>Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole...
More Information >Trailer Lights Specs:
Features:
...Dimensions: 8-5/8" long x 3-1/4" tall x 1-15/16" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mo...
More Information >Trailer Lights Specs:
Features:
...span>mounting holes (center to center): 3" Power draw at 12V: 0.35 amps Wire lead length: 7" Voltage: 14 volts Wattage: 4.9 watts Surface-Mount Light Surface-mount trailer lights install using ...
More Information >Trailer Lights Specs:
Features:
...LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long ...
More Information >Trailer Lights Specs:
Features:
...tall x 5/8" deep Distance between mounting holes (center on center): 2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange o...
More Information >Trailer Lights Specs:
Features:
...LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long ...
More Information >Trailer Lights Specs:
Features:
...1-11/16" wide x 2-1/4" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 2 Power draw at 12V: 0.01 amps 10-Year limited warranty Surface-Mount Light Surface-mount<...
More Information >RV Exterior Lights Specs:
Features:
...in the USA Specs: Dimensions: 5-3/4" long x 3-1/8" tall x 1-1/2" deep Diodes: 12 Wire length: 4" 1-Year limited warranty Surface-Mount Light Surface-mount trailer l...
More Information >Trailer Lights Specs:
Features:
...a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting...
More Information >Trailer Lights Specs:
Features:
...polycarbonate housing and lens Surface mount - hardware not included Single wire design grounds through mounting hardware PC rated Specs: Dimensions: 3-3/4" long x 2-1/16" tall x 15/...
More Information >Trailer Lights Specs:
Features:
...Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibra...
More Information >Trailer Lights Specs:
Features:
...output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with ABS plastic mounting bracket...
More Information >Trailer Lights Specs:
Features:
...on center): 3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not ...
More Information >Trailer Lights Specs:
Features:
...lead length: 6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a s...
More Information >Trailer Lights Specs:
Features:
...no brittle filaments Durable white ABS housing and acrylic lens Amber lens over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 3-Wire design with power...
More Information >Work Lights Specs:
Features:
...LEDs 2-wire pigtail - includes power lead and ground wire Mounts on surface of trailer - hardware not included Specs: Dimensions: 12-3/8" long x 1" tall x 7/16" thick Di...
More Information >Work Lights Specs:
Features:
...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no cutout required Adhesive back allows for easy application Accepts industry standard 2-prong...
More Information >RV Exterior Lights Specs:
Features:
...span>Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and mounting hardware is used to secure the light...
More Information >Trailer Lights Specs:
Features:
...replaceable Red lens over white LEDs Compatible with 12V DC electrical systems Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Sonically sealed, chrome polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construc...
More Information >Trailer Lights Specs:
Features:
...as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount...
More Information >Trailer Lights Specs:
Features:
...3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be c...
More Information >Trailer Lights Specs:
Features:
...white LEDs Durable polycarbonate housing and acrylic lens Surface mount - hardware not included Single wire design grounds through mounting hardware 32" lead with 0.180 male bullet end DOT compl...
More Information >Work Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution...
More Information >Trailer Lights Specs:
Features:
...holes (center on center): 3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a ...
More Information >Work Lights Specs:
Features:
...span>Surface mounts to trailer - hardware not included 2-Wire design with 0.156 male bullets includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16" tall ...
More Information >Trailer Lights Specs:
Features:
...with 12V DC systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire P2 rated light produces a 90-degree beam pattern DOT compliant Specs: Dimensions...
More Information >Work Lights Specs:
Features:
...and lens Surface mounts with mounting bracket (sold separately) Mounts on 3" centers Accepts industry standard 1-prong or 2-prong plug (sold separately) Specs: Overall dimensions: 4&quo...
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Surface mount to trailer above license plate - hardware not included 2-Wire design with 0.180 bullets DOT compliant Made in the USA Specs: Dimensions: 3" long x 1-1...
More Information >Trailer Lights Specs:
Features:
...times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens Requires mounting bracket or grommet (sold...
More Information >Work Lights Specs:
Features:
...Low-profile, oval utility light provides bright white light for your application Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock...
More Information >Work Lights Specs:
Features:
...50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with frosted lens Mounts on surface...
More Information >Work Lights Specs:
Features:
...and lens Surface mounts to trailer - hardware not included 2-Wire design with 0.180 female barrels includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16&quo...
More Information >Trailer Lights Specs:
Work Lights Specs:
Features:
...is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent...
More Information >Trailer Lights Specs:
Features:
...2" deep Diodes: 22 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface
More Information >
Trailer Lights Specs:
Features:
...over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant PC rated Specs: Dimensions: 3-7/8&q...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes...
More Information >Trailer Lights Specs:
Features:
...center on center): 3" Diodes: 10 Power draw at 12.8V: 0.087 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole d...
More Information >LED Strip Lights Specs:
Features:
...won't have to worry about replacing bulbs that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery or overload your circuits. Surface-Mount, ...
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…
view full answer...Hey David, so we have the Air Lift kit part #AL57344 that fits your 2019 Winnebago Class A motorhome that is built on a F-53 chassis. This fits as long as the GVWR is NOT 24 or 26k so you would need to verify that. This is only option we have…
view full answer...I have a solution that may work for you, but we do not currently have any…
view full answer...Hi Dan; I can definitely help you find these parts for your 2020 Grand Design Imagine 2500RL. I reached out to Dexter and found that the leaf springs that came with your axle measure…
view full answer...The Dometic 510 Elongated Seat Toilet part #DOM29FR basically just has a larger bowl and seat than the 320 version part #DOM87FR. The 510 is more or less just a slightly larger and heavier (by 10 lbs) standard height toilet. The 510 will seem more…
view full answer...Yes, the 0.9 Cu Ft Greystone Standard RV Microwave - 900 Watts #324-000105 is a great replacement for your Advent model MW912B as the only real differences is the Greystone being…
view full answer...Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that…
view full answer...Hey Robert, The Optronics 12V LED RV Dome Light #UCL60CSWNB is going to be the closest option we currently offer to the L26-0091-NW-REV part number you have.…
view full answer...Yes, it will and hello! The Triple LED Trailer Tail Light item #CE44VR is the direct replacement for the older Command 003-30.…
view full answer...Thanks for reaching out, Doran! The toggle switch for your FIC-ETJ3500 is pretty unique and it looks like for a direct replacement…
view full answer...For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB.…
view full answer...