Trailer Lights Specs:
Features:
...the strongest adhesive in the business, and 100% of the tape sticks to the surface you are applying to - there are no grid lines or pockets to fill with water and cause tape lift. The technologically advanced...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Al...
More Information >Trailer Lights Specs:
Features:
...for application and mount with peel-and-stick adhesive backing Hardwires to any 12-volt power source with 2-Wire pigtail Available snap-on connector allows you to easily attach 2 sections of LED light strip (A90P1B...
More Information >Trailer Lights Specs:
Features:
...with less power output No bulbs to replace - no brittle filaments Durable black ABS plastic base and snap-on lens Red lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer ...
More Information >Trailer Lights Specs:
Features:
...2.65 amps Tail light: 2.1 amps 3-Year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface...
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use
More Information >Work Lights Specs:
Features:
...No bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mount - hardware included 2-Wire pigtail...
More Information >Trailer Lights Specs:
Features:
...to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Surface mount - hardware not included 2-Wire design - includes lead wire for power and ground wire Specs...
More Information >LED Strip Lights Specs:
Features:
...outdoor locations. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often...
More Information >RV Exterior Lights Specs:
Features:
...waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer...
More Information >Trailer Lights Specs:
Features:
21' L x 2" wide; alternating red/white reflector tape; DOT certified; rated for 7 years of use
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Al...
More Information >LED Strip Lights Specs:
Features:
...to replace - no brittle filaments Durable polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mounts to a flat surface with wedge base - hardware not included 2-Wire design ...
More Information >RV Exterior Lights Specs:
Features:
...span>mounting holes (center on center): 4-7/8" Diodes: 16 Power draw at 12V: 0.32 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting
More Information >
Work Lights Specs:
Features:
...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no panel cutout required 2-Wire design includes power lead and ground wire Specs: Dimensions...
More Information >LED Strip Lights Specs:
Features:
...filaments Polished chrome finish on polycarbonate housing Clear polycarbonate lens with white LEDs Sealed, waterproof construction has an IP67 rating Flat base for surface mounting 2-Wire pigtail - includes...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construction of...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount
More Information >
Trailer Lights Specs:
Features:
...Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat...
More Information >RV Exterior Lights Specs:
Features:
...4-7/8" Diodes: 16 Power draw at 12V: 0.32 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting holes. These lights lay flat again...
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Stud mount to trailer - hardware not included Single wire design grounds through mounting hardware Specs: Dimensions: 4" long x 1-3/4" wide x 2-5/...
More Information >Trailer Lights Specs:
Features:
...Replaceable incandescent bulb Clear lens for license plate light License plate mounting bracket is built in Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire...
More Information >Trailer Lights Specs:
Features:
...Diodes: 1 Power draw at 12.8 volts: 0.054 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...
More Information >Trailer Lights Specs:
Features:
...base Red acrylic lens can be easily replaced Clear lens for license plate light Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green...
More Information >RV Exterior Lights Specs:
Features:
...4-7/8" Diodes: 18 Power draw at 12V: 0.295 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting holes. These lights lay flat again...
More Information >LED Strip Lights Specs:
Features:
...lumens Diodes: 9 Power draw at 12V: 0.375 amps IP rating: IP67 Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights...
More Information >RV Exterior Lights Specs:
Features:
...Clear, rectangular RV light functions as a porch and utility light Corrosion resistant Replaceable lens and bulb Toggle-button on/off switch Tested and approved by UL and CSA Surface mounts
More Information >
Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x 2-1/16&quo...
More Information >Trailer Lights Specs:
Features:
...output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with ABS plastic mounting bracket...
More Information >Work Lights Specs:
Features:
...LEDs 2-wire pigtail - includes power lead and ground wire Mounts on surface of trailer - hardware not included Specs: Dimensions: 12-3/8" long x 1" tall x 7/16" thick Di...
More Information >Trailer Lights Specs:
Features:
...a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Incandescent bulb is replacable Durable, chrome-plated steel housing Clear polycarbonate lens Surface mount to tra...
More Information >LED Strip Lights Specs:
Features:
...polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC systems Surface mounts to a flat surface with wedge base - hardware not included 2-Wire design - includes ground wire and lead wire...
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
...Rectangular RV tail light serves 3 functions Stop light Tail light Turn signal light ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount
More Information >
Trailer Lights Specs:
Features:
4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
...dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep Bulb type: 1157 bulb Power draw at 12.8 volts: Stop light: 2.65 amps Tail light: 2.1 amps 3-Year warranty Surface-Mount Light Surfa...
More Information >RV Exterior Lights Specs:
Features:
...plastic housing resists corrosion Snap-on clear lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...
More Information >Trailer Lights Specs:
Features:
...Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibra...
More Information >Trailer Lights Specs:
Features:
...Rectangular RV tail light serves 3 functions Stop light Tail light Turn signal light ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount
More Information >
Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x 2-1/16&quo...
More Information >RV Exterior Lights Specs:
Features:
...aluminum housing is corrosion resistant Clear polycarbonate lens is less likely to shatter than a glass lens Surface mount - hardware not included Mounts directly to trailer surface on 2-15/16" cen...
More Information >RV Exterior Lights Specs:
Features:
...span>mounting holes (center on center): 4-7/8" Diodes: 16 Power draw at 12V: 0.295 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting
More Information >
Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
...Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat...
More Information >Work Lights Specs:
Features:
...50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with frosted lens Mounts on surface...
More Information >RV Exterior Lights Specs:
Features:
...plastic housing resists corrosion Snap-on clear lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...
More Information >Trailer Lights Specs:
Features:
...Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 60151 Peterson # M434 Surface-Mount Light Surface-mount trailer lights install using a flange...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Sonically sealed, chrome polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construc...
More Information >Trailer Lights Specs:
Features:
...replaced Durable chrome-plated brass construction Clear lens over incandescent bulb Compatible with 12V DC systems Snap-in mounting - light easily clips into 1-1/4" diameter mounting hole Single ...
More Information >Work Lights Specs:
Features:
...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no cutout required Adhesive back allows for easy application Accepts industry standard 2-prong...
More Information >Trailer Lights Specs:
Features:
...over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 2-5/8" wi...
More Information >Work Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution...
More Information >Work Lights Specs:
Features:
...and lens Surface mounts with mounting bracket (sold separately) Mounts on 3" centers Accepts industry standard 1-prong or 2-prong plug (sold separately) Specs: Overall dimensions: 4&quo...
More Information >Work Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution...
More Information >Trailer Lights Specs:
Features:
...and housing Clear lens over incandescent bulb Compatible with 12V DC systems Multiple mounting options Flush mount with grommet (A91GB - sold separately) Surface mount with bracket (A91BB - sold separately...
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 4 strips; DOT certified; rated for 7 years of use
More Information >Trailer Lights Specs:
Features:
...polycarbonate lens and gray housing Surface mount with ear-mount base - hardware not included Accepts industry standard 2-prong plug (sold separately) Specs: Qty: 1 license plate light Overall dimensions...
More Information >Trailer Lights Specs:
Features:
...times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens Requires mounting bracket or grommet (sold...
More Information >Work Lights Specs:
Features:
...span>Surface mounts to trailer - hardware not included 2-Wire design with 0.156 male bullets includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16" tall ...
More Information >Work Lights Specs:
Features:
...and lens Surface mounts to trailer - hardware not included 2-Wire design with 0.180 female barrels includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16&quo...
More Information >Trailer Lights Specs:
Features:
...be easily replaced Durable ABS plastic base Amber snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Single wire design grounds...
More Information >Trailer Lights Specs:
Features:
...Red trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface
More Information >
Work Lights Specs:
Features:
...Low-profile, oval utility light provides bright white light for your application Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock...
More Information >Trailer Lights Specs:
Features:
...systems Surface mount to trailer with mounting bracket - hardware not included 2-Wire design with power and ground wire DOT compliant Specs: Dimensions: 8-5/8" Long x 3-1/4" wide ...
More Information >Trailer Lights Specs:
Features:
...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >Trailer Lights Specs:
Features:
...Amber trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface
More Information >
Trailer Lights Specs:
Features:
...The bulb is protected in the housing and can be easily replaced. The base surface mounts on 2" centers. The light contains a single lead wire for power and is grounded through the mounting hardw...
More Information >RV Exterior Lights Specs:
Features:
...lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground wire UL and CSA certified Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly app...
More Information >RV Exterior Lights Specs:
Features:
...lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground wire UL and CSA certified Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
...be easily replaced Durable ABS plastic base Red snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Single wire design grounds...
More Information >Work Lights Specs:
Features:
...stainless steel base Clear snap-on lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included stud Single wire design grounds through mounting hardware Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
...2-3/16" Diameter, round reflector Acrylic lens Surface mount Self-adhesive Red...
More Information >Trailer Lights Specs:
Features:
...Amber trailer reflector meets FMVSS requirements for reflex reflector when properly mounted Durable acrylic construction Adhesive backing allows for easy stick-on application Specs...
More Information >Trailer Lights Specs:
Features:
...be easily replaced Durable polycarbonate housing and lens Red snap-on lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds...
More Information >Trailer Lights Specs:
Features:
...be easily replaced Durable polycarbonate housing and lens Amber snap-on lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds...
More Information >RV Exterior Lights Specs:
Features:
...plastic housing resists corrosion Snap-on amber lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...
More Information >Trailer Lights Specs:
Features:
...Durable ABS housing and snap-on lens Amber lens over incandescent bulbs Compatible with 12V DC system Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT...
More Information >RV Exterior Lights Specs:
Features:
...9-3/4" tall x 3-1/2" wide x 2-1/4" deep Power draw: 0.87 amps at 12 volts Installation: surface mount 3-Year lim...
More Information >Trailer Lights Specs:
Features:
...Gray-coated license-plate light Surface mount Mounting hardware and adhesive not included Single-wire design Replaceable bulb Uses replaceable bulb #168 2-5/8" Long...
More Information >Trailer Lights Specs:
Features:
...Durable ABS housing and snap-on lens Red lens over incandescent bulbs Compatible with 12V DC system Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT...
More Information >Work Lights Specs:
Features:
...is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly app...
More Information >Trailer Lights Specs:
Features:
...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >Trailer Lights Specs:
Features:
...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly...
More Information >Trailer Lights Specs:
Features:
...the strongest adhesive in the business, and 100% of the tape sticks to the surface you are applying to - there are no grid lines or pockets to fill with water and cause tape lift. The technologically advanced...
More Information >Trailer Lights Specs:
Features:
...trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components. Surface-Mount Light Surface-mount...
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…
view full answer...Hey David, so we have the Air Lift kit part #AL57344 that fits your 2019 Winnebago Class A motorhome that is built on a F-53 chassis. This fits as long as the GVWR is NOT 24 or 26k so you would need to verify that. This is only option we have…
view full answer...I have a solution that may work for you, but we do not currently have any…
view full answer...Hi Dan; I can definitely help you find these parts for your 2020 Grand Design Imagine 2500RL. I reached out to Dexter and found that the leaf springs that came with your axle measure…
view full answer...The Dometic 510 Elongated Seat Toilet part #DOM29FR basically just has a larger bowl and seat than the 320 version part #DOM87FR. The 510 is more or less just a slightly larger and heavier (by 10 lbs) standard height toilet. The 510 will seem more…
view full answer...Yes, the 0.9 Cu Ft Greystone Standard RV Microwave - 900 Watts #324-000105 is a great replacement for your Advent model MW912B as the only real differences is the Greystone being…
view full answer...Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that…
view full answer...Hey Robert, The Optronics 12V LED RV Dome Light #UCL60CSWNB is going to be the closest option we currently offer to the L26-0091-NW-REV part number you have.…
view full answer...Yes, it will and hello! The Triple LED Trailer Tail Light item #CE44VR is the direct replacement for the older Command 003-30.…
view full answer...Thanks for reaching out, Doran! The toggle switch for your FIC-ETJ3500 is pretty unique and it looks like for a direct replacement…
view full answer...For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB.…
view full answer...