2010 Keystone Laredo Fifth Wheel RV Exterior Lighting

Features:

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug.

Features:

This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.

Features:

150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.

Features:

7-7/8" x 3-1/4". Low-profile light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. Molded 2-way plug. PC rated.

Features:

7-7/8" x 3-1/4". Low-profile tail light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". Surface mount. Molded 2-way plug. PC Rated.

Features:

8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.

Features:

15-1/2" x 9-1/2" Rectangle. Black molded frame holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.

Features:

8-1/16" x 2-7/8". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount - hardware included. 3-Wire design. P2 rated.

Features:

8" x 2-7/8" Rectangle. Low-profile trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Durable plastic housing and acrylic lens. Stud mount. 3-Wire pigtail.

Features:

8-1/16" x 2-7/8". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". Surface mount. 3-Wire pigtail. P2PC Rated.

Features:

3-3/4" x 2-1/16" Rectangle. Incandescent trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Durable ABS base. Ear mount on 3-1/4" centers. Single wire. P2 rated.

Features:

4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.

Features:

8-5/8" x 3-1/4". LED trailer light with ABS mounting bracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design.

Features:

7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.

Features:

4" x 2" Rectangle. Trailer light serves as either a clearance or side marker light. Built-in reflex reflector. Durable black ABS plastic base. Surface mount to trailer - hardware not included. 2-Wire pigtail. P2 rated.

Features:

4" Long x 1-9/16" tall x 2-5/8" deep. Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. Clear lens.

Features:

8-1/16" x 2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers over 80" wide. Stud mount - includes hardware.

Features:

8" x 2-7/8" Rectangle. Low-profile trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Durable plastic housing and acrylic lens. 12 LEDs. Stud mount. 3-Wire pigtail.

Features:

2-3/4" x 1-3/8" Rectangle. Mini LED trailer light illuminates your license plate. Durable ABS housing protects light against road debris. Surface mount with foam gasket - hardware included. 2-Wire design.

Features:

7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate light for trailers wider than 80". Surface mount. 3-Wire pigtail. PC Rated.

Features:

8-1/16" x 2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light for trailers over 80" wide. Stud mount - includes hardware.

Features:

2-3/4" x 1-7/8" x 2". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount on 1-3/4" centers with included studs. 2-Wire pigtail with power and ground. Studs included.

Features:

8-3/8" Long x 2-1/2" tall. Black molded bracket holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.

Features:

150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years of use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" Silver/11" red, perforated.

Features:

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. Surface mount - hardware not included. 2-Wire design. P2 rated.

Features:

18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use

Features:

2-3/4" x 1-3/8" Rectangle. Low-profile LED trailer light with chrome-plated polycarbonate housing illuminates your license plate. Surface mount with foam gasket - hardware included. 2-Wire design.

Features:

4" x 2" Rectangle. Trailer light serves as either a clearance or side marker light. Built-in reflex reflector. Durable black ABS plastic base. Surface mount to trailer - hardware not included. 2-Wire pigtail. P2 rated.

Features:

3-3/4" x 2-1/16". LED trailer light serves as a side marker or clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. Single wire design grounds through hardware. PC rated.

Features:

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. Surface mount - hardware not included. 2-Wire design. P2 rated.

Features:

4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

13-5/8" x 10-7/8" Rectangle. LED utility light illuminates an exterior area with bright white light. Durable aluminum construction with silver powder coat resists corrosion. Mounts flush to exterior trailer wall.

Features:

4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 1-Wire design. PC-rated.

Features:

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. Surface mount - hardware not included. 2-Wire design. P2 rated.

Features:

4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 1-Wire design. PC-rated.

Features:

7-7/8" x 3-1/4". Low-profile incandescent light serves 8 functions: brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light. Shock proof sockets protect bulbs. Stud mount. 3-Wire design.

Features:

4" Long x 1-3/4" wide x 2-5/16" thick. Incandescent trailer light illuminates your license plate. Durable stainless steel mounting base. Stud mount to trailer - hardware not included. 1-Wire design. (1) 194 Bulb.

Features:

7-7/8" x 3-1/4". Low-profile incandescent light serves 7 functions: brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector. Shock proof sockets protect bulbs. Stud mount. 3-Wire design.

Features:

4" x 2" x 1-15/16". Waterproof LED trailer light illuminates your license plate. Stainless steel mounting base. Durable polycarbonate lens and housing. Surface mount to trailer - hardware not included. Accepts standard 2-prong plug.

Features:

5-3/4" x 3-1/8" Rectangle. Multipurpose LED light illuminates the interior or exterior of your RV, camper, or trailer with bright light. Screw-on lens. Surface mount. 2-Wire design.

Features:

3-7/8" x 1-7/8". Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.

Features:

Low-profile utility light illuminates an interior or exterior area with bright white light. Durable polycarbonate lens and housing. Surface mount - hardware not included. Hardwired with separate ground.

Features:

3-3/4" x 2-1/4" Rectangle. Incandescent trailer light serves as a clearance or side marker light. Durable chrome-plated ABS housing. Flush mount to trailer with included screws. Twist-in socket with 2-wire design. P2 rated. (1) 194 bulb.

Features:

18" Long x 2" wide. Alternating red/white reflector tape makes your truck or trailer more visible in low light. 7" White/11" red pattern. Industrial-strength adhesive backing for easy mounting. 4 Strips included.

Features:

4" x 1-11/16" Rectangle. LED trailer light illuminates your trailer's license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. Durable metal base with chrome housing. Surface mount. 2-Wire design.

Features:

3-3/4" x 1-3/4". Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.

Features:

3-3/4" x 2-1/4" Rectangle. Incandescent trailer light serves as a clearance or side marker light. Durable chrome-plated ABS housing. Flush mount to trailer with included screws. Twist-in socket with 2-wire design. P2 rated. (1) 194 bulb.

Features:

15-1/2" x 9-1/2" Rectangle. This white molded bracket holds your trailer's standard size license plate. Built-in LED light illuminates your license plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.

Features:

4" x 2" Rectangle. Trailer light serves as either a side marker or clearance light when properly mounted. Built-in reflex reflector. Black ABS plastic base. Surface mount to trailer - hardware not included. 2-Wire pigtail. P2 rated.

Features:

4" x 1-3/4" x 2-1/4". Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Durable ABS housing. Surface mounts to trailer. 1-Wire design. (1) 168 bulb.

Features:

4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 2-Wire design. PC-rated.

Features:

4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. Surface mount on 3" centers - hardware not included. Twist-in bulb socket. P2 rated.

Features:

8-1/16" x 2-15/16". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". Surface mount. 3-Wire pigtail. PC Rated.

Features:

8-7/8" x 2-7/8" x 2-1/4". Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Surface mounts to trailer with powder-coated steel bracket. 1-Wire design. (1) 168 bulb.

Features:

3-7/8" x 2-3/4". Low-profile LED trailer light functions as a clearance or side marker trailer light. Built-in reflex reflector. Durable polycarbonate housing. Surface mount - hardware not included. Single wire design. P2 rated.

Features:

8-1/16" L x 2-7/8" W x 2-13/16" D; Corrosion resistant; replaceable lens and bulbs; shockproof socket; plug-n-go 2-way connection; 2-bulb incandescent. Surface mount with included hardware.

Features:

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector and supplemental turn function. ABS housing. Surface mount - hardware not included. 3-Wire design. P2 rated.

Features:

4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Built-in reflector. Durable white ABS base. Twist-in bulb socket. Surface mount - hardware not included. 2-Wire design. P2 rated.

Features:

4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Built-in reflector. Durable black ABS base. Twist-in bulb socket. Surface mount - hardware not included. 2-Wire design. P2 rated.

Features:

3-13/16" x 1-3/16" Rectangle. Waterproof, incandescent trailer light illuminates your license plate. Mounts on surface of trailer - mounting bracket not included. Accepts industry standard 2-prong plug.

Features:

8-5/8" x 2-5/8" x 2-1/2". Trailer light illuminates your license plate. Durable ABS housing and polycarbonate lens. Surface mount with included bracket. 2-Wire pigtail.

Features:

8-1/16" x 2-15/16". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.

Features:

2-5/8" x 1-9/16" Rectangle. Incandescent trailer light with chrome-plated housing illuminates your license plate. Bulb can be easily replaced. Stud mount to trailer. 1-Wire design. (1) 194 Bulb.

Features:

3-7/8" x 1-1/4" Rectangle. Waterproof LED trailer light illuminates an exterior area with bright light. Durable polycarbonate housing and lens. Surface mounts with bracket (sold separately). Accepts standard 1-wire or 2-wire plug.

Features:

4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 2-Wire design. PC-rated.

Features:

3-3/8" x 1-3/4" Rectangle. Waterproof, incandescent trailer light illuminates your trailer's license plate. Durable polycarbonate housing and lens. Surface mount with mounting ears - hardware not included. Accepts standard 2-wire plug.

Features:

4" x 2" Rectangle. Incandescent trailer light serves as a clearance and side marker light. Double bullseye with premium bulbs for long life. Snap-on lens. Surface mount - hardware not included. 1-Wire design. PC rated. (2) 194 bulbs.

Features:

2-1/2" x 1-1/4" Rectangle. Waterproof LED trailer light illuminates your license plate. Requires mounting bracket or grommet (sold separately) for installation. 2-Wire pigtail with power and ground wires. Clear lens.

Features:

4" x 1-1/4" Rectangle, red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

2-1/2" x 1-1/4" x 13/16". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount - requires bracket (sold separately). Accepts standard 2-prong plug.

Features:

4" x 2" Rectangle. Incandescent trailer light serves as a clearance and side marker light. Double bullseye with premium bulbs for long life. Snap-on lens. Surface mount - hardware not included. 1-Wire design. PC rated. (2) 194 bulbs.

Features:

3-1/8" x 1-3/8" Rectangle red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

3-3/8" x 1-1/4" x 2-3/8". Waterproof license plate light illuminates your license plate. Single incandescent bulb is easily replaceable. Surface mount - hardware not included. Accepts standard 2-prong plug. 1 bulb.

Features:

4-1/16" L x 2-1/8" W x 1-1/8" D; Corrosion resistant; replaceable lens and bulbs; surface mount on 3" centers; 1-wire; 2-bulb incandescent

Features:

3-3/16" x 1-11/16" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.

Features:

2-1/2" x 1-1/16" Rectangle. Low-profile LED utility light illuminates an interior area with bright light. Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design with 0.180 female barrels.

Features:

3-1/8" x 1-3/8" Rectangle amber reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

8-5/8" Long x 3-1/4" wide x 2-5/16" thick. Incandescent trailer light illuminates your license plate. Surface mounts to trailer with mounting bracket - hardware not included. 2-Wire design. (1) 67 Bulb.

Features:

3-1/2" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.

Features:

3-7/8" x 1-1/4" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

18" L x 2" W; alternating red/white reflector tape; 4 strips; DOT certified; rated for 7 years of use

Features:

8" x 2-15/16". Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. GloLight lens creates a solid light pattern with a smooth appearance. Stud mount. 3-Wire pigtail.

Features:

2-1/2" x 1-3/16" Rectangle. Waterproof, incandescent trailer light illuminates your license plate. Bulb can be easily replaced. Multiple mounting options. Accepts industry standard 2-prong plug. (1) 194 Bulb.

Features:

This rectangular, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.

Features:

3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

3-7/8" x 2" Rectangle. Waterproof, LED trailer light serves as either a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount to trailer - hardware not included. 2-Wire design. PC rated.

Features:

4-1/16" L x 2-1/8" W x 1-1/8" D; Corrosion resistant; replaceable lens and bulbs; surface mount on 3" centers; 1-wire; 2-bulb incandescent

Features:

This rectangular, amber reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.

Features:

4" x 2" Rectangle. Waterproof trailer light functions as a side marker or clearance light. Durable polycarbonate lens. Surface mount - hardware not included. 2-Wire pigtail. P2 rated.

Features:

2-1/8" x 1-1/8" Rectangle. Incandescent trailer light functions as a utility or license plate light. Durable stainless steel base. Snap-on lens. Stud mount to trailer - hardware included. 1-Wire design. 1 Bulb.

Features:

4-5/16" x 1-11/16" Rectangle amber reflector. Self-adhesive backing allows for stick-on application.

Features:

Gray-coated license-plate light with adhesive surface mount and replaceable bulb

Features:

2-11/16" x 1-1/2" x 2-1/8". Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Durable ABS housing. Surface mounts to trailer. 1-Wire design. (1) 168 bulb.

Features:

4-5/16" x 1-11/16" Rectangle red reflector. Self-adhesive backing allows for stick-on application.

Features:

2-9/16" x 1-1/4" Rectangle. Incandescent trailer light illuminates your license plate when properly mounted. Durable chrome-plated housing. Gasket helps create a weathertight seal. Surface mount to trailer. 2-Wire design. (1) 194 bulb.

Features:

5-5/8" x 3-1/8" Rectangle. Low-profile LED utility light illuminates an area with warm white light. Durable white polycarbonate base and screw-on acrylic lens. Mounts on surface of trailer - hardware not included. 2-wire pigtail. 12 Diodes.

Features:

21' L x 2" wide; alternating red/white reflector tape; DOT certified; rated for 7 years of use

Features:

2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

150' L x 2" W; alternating red/white reflector tape. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" White/11" red pattern, perforated. 1,000 Candlepower.

Features:

2-1/2" x 1-1/16" Rectangle. Low-profile LED trailer light illuminates an area with bright light. Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design with 0.156 male bullets.