RV Covers Specs:
Features:
Throw this storage cover over your Class A motorhome to protect it while you're storing it for the season. The contoured cover conforms to the shape of your RV and secures with the integrated straps so it won't flap in the wind.
More Information >RV Covers Specs:
Features:
Throw this storage cover over your Class A motorhome to protect it while you're storing it for the season. The contoured cover conforms to the shape of your RV and secures with the integrated straps so it won't flap in the wind.
More Information >RV Covers Specs:
Features:
Throw this storage cover over your Class A motorhome to protect it while you're storing it for the season. The contoured cover conforms to the shape of your RV and secures with the integrated straps so it won't flap in the wind.
More Information >RV Covers Specs:
Features:
Throw this storage cover over your Class A motorhome to protect it while you're storing it for the season. The contoured cover conforms to the shape of your RV and secures with the integrated straps so it won't flap in the wind.
More Information >RV Covers Specs:
Features:
Throw this storage cover over your Class A motorhome to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.
More Information >RV Covers Specs:
Features:
Throw this storage cover over your Class A motorhome to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.
More Information >Videos
for RV Covers
Help Articles
for RV Covers
Expert Answers
for RV Covers
Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where…
view full answer...Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.
view full answer...There is a hitch receiver that could work for your 1995 Chevy G20 van, so long as your van does NOT have a step bumper. If so, I recommend the Draw-Tite #75121 hitch, this is a…
view full answer...