Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.
Features:
Specs:
Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.
After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.
If you're set up at the campsite for the weekend, the motion sensor will automatically power the touchscreen monitor on if they sense movement in the form of a prowling animal or person.
Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.
No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.
And because this camera has 8 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' should you arrive at the campsite after dark and need to back up into your parking spot. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.
If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.
This camera system includes a suction cup mount that you can use to stick the monitor onto your dashboard or windshield. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.
Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. Just bolt the camera down with the included mounting screws and connect to your RV's reverse lights. Be sure that the camera won't interfere with any slide outs or other moving components. If you intend to use this system only for backing up, wire the camera to the reverse lights. If you prefer to use it to keep an eye on your rig on the highway, wire the camera to the running lights.
Average Customer Rating: 4.7 out of 5 stars (745 Customer Reviews)
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.
I want to love this, but frankly I have consistent video dropout and lag issues towing a 26-foot GD Imagine trailer in various weather conditions. I tried fully disconnecting and resetting, repositioning antennas, and praying to the antenna gods, but it's only good for about two-thirds of the time. I think "YES, finally!" and then it starts dropping out again, making me insane. Also, as far as I can tell, there is no real good antenna upgrade for this. I suspect if you have a shorter trailer, or some fancy way to beef up the signal you'll do better.
My trailer was prewired for the Furrion camera so it was truly a plug and play install. Haven’t used it yet but everything works as it should.
Camera system works as advertised! Easy install. Happy with the purchase.
Camera works as advertised. Wired camera into running lights 5th wheel. Took about 45 min to layout, drill, pull wire, caulk, and mount.
I did install 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord on both camera and receiver.
Receiver took about 20 min to install. I routed wires nicely, add choke rings.
I have 4 bars running 60 mph. Great purchase and very pleased.
Randy S.
10/13/2018
Camera and receivers still working great. Only issue is antenna broke on camera. Purchased aftermarket router antenna 18”. Still have 4 bars.
This camera has been great. I can keep an eye on our bikes that are on the back of our camper. I like that I can see how close drivers are behind me and I can see when I've cleared a vehicle that I just passed.
Brian
4/8/2024
Still working great. Does exactly what I was hoping it would do.
Great video and audio quality
Gary
5/8/2024
Another year, and another camping season ahead of me. So far the Furrion camera and Monitor are working like a charm. As expected!!
Was hesitant to spend the money but after using it regularly was pleasantly surprised. Now I can back in without getting out to look! Love this product and highly recommend.
We received our Furrion Observation Camera, FOS43TASF, quickly as advertised. Our camera arrived with no damage. Installation was fast and easy on our 2018, Grand Design, Imagine, 2600RB, plug and play with the existing mount. It took maybe 20 - 30 minutes at the most to install, pair and make minor adjustments. The camera and viewer paired immediately when power was turned on. The camera turned on when the trailer parking lights were turned on. Positioned the camera so the spare tire could be seen on the observation screen to give a point of reference to the back of the camper. Received a strong signal on the pairing. We haven't driven the camper on the road yet to give a review on the workings of the the unit but, don't expect any problems. Should be a good safety feature to know what is behind us when towing. Very happy with our purchase and would recommend this product. This product from etrailer was the least expensive price I could find while researching price points. Thank you etrailer.
We purchased the Furrion FOS43TASF to use as an observation camera while towing our new 2018 26' Jayco Jay Flight travel trailer. Our Jayco came equipped with a pre-wired mount for the Furrion camera. The pre-wired black female cord for the camera was present but someone at the factory forgot to wire it to power, so when I plugged in the camera, there was no juice... I removed the center clearance light on the back of the trailer, used the supplied power cord and to feed in/splice in from the clearance light. Installation only took about 15 minutes. We already made our first trip this season and the camera worked wonderful. Great picture, no delays, very happy being able to see what's in the back and coming along the sides. We didn't use the monitor mount supplied with the Furrion, instead we used a vent phone mount I had for my phone that worked perfectly. This is our second and the best observation camera for towing a trailer we've experienced. The first one was another brand on different travel trailer we just sold. Our experience with that camera was poor picture quality, delays and blackouts. We definitely would recommend the Furrion FOS43TASF.
This rear observation system was exactly what I needed to give me some eyes in the back of my towable trailer. The system communicates with a 4 bars of strength using a wireless signal between the camera, located at the back of my 24 foot long (2401RG Minnie Winnebago) trailer, and the monitor mounted in the cab of my Ford F150 XLT.
The installation was easy and only took about an hour at most.
I located the two wires feeding the center clearance light near the top of the trailer and through a new drilled hole just below the light I was able to feed in/splice in, the camera wires to get the power the camera needed. (Tip. Before this I used a pair of 6V batteries in series to get temporary power to the camera to ensure good signal back to the monitor in the truck and that a good rear view was possible from the intended mounting spot). Now I can see from the trailer's back bumper to about 35 feet behind on the road.
As usual the Etrailer team was helpful and the order arrived quickly and correctly.
Great Job Julie H. for the last minute assist to correct my order.
This was fast and the right product. I am satisfied and recommend.
Good system. Only issue is my 2022 Silverado 2500, needed an additional power plug to use. When purchased through etrailer I always receive an error about my trailer light. No issues with lights. Additional REQUIRED power adapter has an issue.
I needed a way to see my Indian motorcycle on a trailer behind my 40’ fifth wheel. I had Fords system when I bought my new truck, but there was much more wiring than I wanted to tackle and I was hoping for a non wired system. I bought this with my fingers crossed. Very easy installation of less than an hour and the results were what I wanted
Super easy install if your unit is already equipped with the mounting bracket from the factory. The only thing I was not impressed with was the monitor mount. Quite restrictive if your dash is a grained texture you are pretty much restricted to mounting on the windshield which I found a bit annoying. I happened to have a CD slot mount, and we never use the CD player so I tried it. Couldn’t have found a better location!!
Installation took 10 minutes, literally. already paired and my trailer had the mount installed. turn on parking lights and everything worked. Aiming camera took one minute. Now I can see who is behind me while driving.
Backing into a campsite just got way easier as well.
It's a good product. The camera lights are non-glare light blue, but they really show everything very well in the dark. Our trailer is 23ft. and the signal gets to the truck dash board from the back of the trailer quite well.
Product is good, only wish it had a 7" screen
I like it a lot I double a travel trailer and a atv trailer it helps me keep a eye on the trailer behind the camper and is great for changing lanes. The only thing I would do different is get the bigger monitor.
Thanks
Super easy installation on a camper that already had the underlying Furrion power supply wire. Great quality picture and audio. Highly recommend this for the price!
Looks easy enough to install based on already docking base in RV. Thanks for the great service.
I love this camera! It is so much better than I originally thought it would be. I use it for my rearview mirror when traveling, I can see who is behind my Camper and I don't have to use the add on mirrors on my tow vehicle anymore because I can see now with the backup camera in the rear blind spot and the rest with my tow vehicles mirrors. I also can now back my travel trailer into the campsites without my wifes help and do that with only one try. It has been such a nice experience using this camera system.
Randy
10/15/2022
I still love it! It is still awesome, I would not want to go camping without it. It has made my camping experience so much more pleasurable. If you don’t have one of these I highly recommend you get one .
Works great
The RV back up camera work great once I got it hook up. But at the RV dealer and manufactory said was pre wire and had a cover with plug and play. Yell right I tried plug and play but was not the case the plug was there but had to hard wire in and do everything to splice the cable in to get to work. Just Lazy manufactory's this day and time. I'm sure the dealer assume it was wire in. I Have a new 2022 Cameo by Cross Roads that builds Red Woods I hate to know I pay $180,000.00 heck my RV was listed for $118,000.00. But over all the Furrion Vision S Wireless RV Backup Camera System works Great. Just be aware of the Lazy manufactory's anymore. I didn't take any pictures didn't have time after 15 min's turned in to 2 hours.
To easy to install!! thank you!
If you own a 22 1/2' trailer and a SUV for towing you will find the range of the signal at its max with communication between camera and receiver. Meaning many times the signal is lost or there is a delay in the image. A vehicle will already be at your driver's side door when it shows up at your bumper on the screen. The view is VERY bubbled. Other than that LOVE LOVE LOVE it! Very helpful when it comes to backing up and hearing the individual assisting with instructions. No yelling needed and no disturbing your neighbors when parking.
Jenny N.
1/6/2022
I recommend adding part # WVOSAPANTEXT to help boost the signal of the camera.
Helpful Links
Do you have a question about this RV Camera System?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/15/2024
We have found that you can use part # WVOSAPANTEXT to help boost the antenna signal. Also making sure that the antenna is as high as possible will help.